References
- R. W. Serth, and T. Lestina, Process Heat Transfer: Principles, Applications and Rules of Thumb. 2nd edition, Amsterdam: Elsevier Science Publishers, 2014.
- J. R. Thome, Engineering Data Book III. Decatur, AL: Wolverine Tube, Division of UOP Inc., 2004.
- G. B. Eke, and C. A. Ebieto, “Performance analysis of shell and tube heat exchangers: A case study,” J. Emerg. Trends Eng. Appl. Sci., vol. 3, no. 5, pp. 899–903, 2012.
- S. P. Chit, N. A. San, and M. M. Soe, “Flow analysis in shell side on the effect of baffle spacing of shell and tube heat exchanger,” Int. J. Sci. Technol. Soc., vol. 3, no. 5, pp. 254–259, 2015. doi:10.11648/j.ijsts.20150305.15.
- R. K. Shah, and A. Pignotti, “Influence of a finite number of baffles on shell-and-tube heat exchanger performance,” Heat Transf. Engng., vol. 18, no. 1, pp. 82–94, 1997. doi:10.1080/01457639708939891.
- S. T. M. Than, K. A. Lin, and M. S. Mon, “Heat Exchanger Design, WASET,” Intl. J. of Mech., Aero. Indus. Mecha. and Manuf. Engng., vol 2, no. 10, pp. 1151–1158, 2008.
- K. Mohammadi, W. Heidemann, and H. Müller-Steinhagen, “Numerical investigation of the effect of baffle orientation on heat transfer and pressure drop of shell and tube heat exchangers with leakage flows,” Heat. Transf. Engng., vol. 30, no. 14, pp. 1123–1135, 2009. doi:10.1080/01457630902972694.
- A. F. Jozaei, A. Ghafouri, and M. M. Navaei, “Effect of Number of baffles on pressure drop and heat transfer in a shell and tube heat exchanger,” WASET Intl. J. Mech. Aero. Indus. Mecha. and Manuf. Engng., vol. 2, no. 1, pp. 18303–18312, 2015.
- A. F. Jozaei, A. Baheri, M. K. Hafshejani, and A. Arad, “Optimization of baffle spacing on heat transfer, pressure drop and estimated price in a shell-and-tube heat exchanger,” World Appl. Sci. J., vol. 18, no. 12, pp. 1727–1736, 2012.
- H. Li, and V. Kottke, “Effect of baffle spacing on pressure drop and local heat transfer in shell-and-tube heat exchangers for staggered tube arrangement,” Int. J. Heat Mass Transf., vol. 41, no. 10, pp. 1303–1311, 1998. doi:10.1016/S0017-9310(97)00201-9.
- E. S. Gaddis, and V. Gnielinski, “Pressure drop on the shell side of shell and tube with segmental baffles,” Chem. Eng. Process., vol. 36, no. 2, pp. 149–159, 1997. doi:10.1016/S0255-2701(96)04194-3.
- M. O. Petinrin, and A. A. Dare, “Performance of shell and tube heat exchangers with varying tube layouts,” Br. J. Appl. Sci. Technol., vol. 12, no. 2, pp. 1–8, 2016. doi:10.9734/BJAST/2016/20021.
- S. S. Deshpande, and S. A. Hinge, “Design and performance study of shell and tube heat exchanger with single segmental baffle having perpendicular & parallel-cut orientation,” Int. J. of Engng. Res. Tech., vol. 3, no. 11, pp. 1366–1370, 2014.
- V. Vukić, M. A. Tomi, P. M. Zivkovi, and G. S. Ili, “Effect of segmental baffles on the shell-and-tube heat exchanger effectiveness,” Hem. Ind., vol. 68, no. 2, pp. 171–177, 2014. doi:10.2298/HEMIND130127041V.
- A. P. Fraas, Heat Exchanger Design. New York: John Wiley & Sons, 1989.
- J. W. Palen, and J. Taborek, “Solution of shell side flow pressure drop and heat transfer by stream analysis method,” Chem. Eng. Prog. Symp. Ser., vol. 65, no. 93, pp. 53–63, 1969.