A Possible Strategy for the Performance Enhancement of Turbine Blade Internal Cooling With Inclined Ribs

References

• J.C. Han, S. Dutta, and S. Ekkad, Gas Turbine Heat Transfer and Cooling Technology. 2nd ed. Boca Raton: CRC Press, 2012.
   Google Scholar
• J.C. Han, L.R. Glicksman, and W.M. Rohsenow, “An investigation of heat transfer and friction for rib-roughened surfaces,” Int J Heat Mass Tran, vol. 21, no. 8, pp. 1143−1156, 1978. DOI:10.1016/0017-9310(78)90113-8.
   Web of Science ®Google Scholar
• J.C. Han, and J.S. Park, “Developing Heat Transfer in Rectangular Channels With Rib Turbulators,” Int J Heat Mass Tranr, vol. 31, no. 1, pp. 183−195, 1998. DOI:10.1016/0017-9310(88)90235-9.
   Web of Science ®Google Scholar
• M.E. Taslim, and A. Lengkong, "45 Deg Staggered Rib Heat Transfer Coefficient Measurements in a Square Channel,” ASME J Turbomachinery, vol. 120, no. 3, pp. 571−580, 1998. DOI:10.1115/1.2841755.
   Web of Science ®Google Scholar
• S.Y. Won, N.K. Burgess, S. Peddicord, and P.M. Ligrani, “Spatially Resolved Surface Heat Transfer for Parallel Rib Turbulators With 45 Deg Orientations Including Test Surface Conduction Analysis,” ASME J Heat Transfer, vol. 126, no. 2, pp. 193−201, 2004. DOI:10.1115/1.1668046.
   Web of Science ®Google Scholar
• G. Tanda, and A. Abram, “Forced Convection Heat Transfer in Channels With Rib Turbulators Inclined at 45 deg,” ASME J Turbomachinery, vol. 131, no. 2, pp. 10, 2009, 021012.
   Web of Science ®Google Scholar
• G. Tanda, “Effect of Rib Spacing on Heat Transfer and Friction in a Rectangular Channel With 45-Deg Angled Rib Turbulators on One/Two Walls,” Int J Heat Mass Tranr, vol. 54, no. 5-6, pp. 1081−1090, 2011. DOI:10.1016/j.ijheatmasstransfer.2010.11.015.
   Web of Science ®Google Scholar
• P. Forsyth, M. McGilvray, and D.R.H. Gillespie, “Secondary Flow and Heat Transfer Coefficient Distributions in the Developing Flow Region of Ribbed Turbine Blade Cooling Passages,” Experiments in Fluids, vol. 58, no.5, pp. 15, 2017.
   Google Scholar
• A. Murata, and S. Mochizuki, “Effect of Cross-Sectional Aspect Ratio on Turbulent Heat Transfer in an Orthogonally Rotating Rectangular Duct With Angled Rib Turbulators,” Int J Heat Mass Tranr, vol. 46, no. 16, pp. 3119−3133, 2003. DOI:10.1016/S0017-9310(03)00080-2.
   Web of Science ®Google Scholar
• J.C. Han, and Y.M. Zhang, “High Performance Heat Transfer Ducts With Parallel Broken and V-Shaped Broken Ribs,” Int J Heat Mass Tranr, vol. 35, no. 2, pp. 513−523, 1992. DOI:10.1016/0017-9310(92)90286-2.
   Web of Science ®Google Scholar
• H.H. Cho, S.J. Wu, and H.J. Kvon, “Local Heat/Mass Transfer Measurements in a Rectangular Duct With Discrete Ribs,” ASME J Turbomachinery, vol. 122, no. 3, pp. 579−586, 2000. DOI:10.1115/1.1303049.
   Web of Science ®Google Scholar
• H.H. Cho et al., “The Effects of Gap Position in Discrete Ribs on Local Heat/Mass Transfer in a Square Duct,” J Enhanced Heat Tranr, vol. 10, no. 3, pp. 287−300, 2003. DOI:10.1615/JEnhHeatTransf.v10.i3.40.
   Web of Science ®Google Scholar
• K.R. Aharwal, B.K. Gandhi, and J.S. Saini, “Heat Transfer and Friction Characteristics of Solar Air Heater Ducts Having Integral Inclined Discrete Ribs on Absorber Plate,” Int J Heat Mass Tranr, vol. 52, no. 25-26, pp. 5970−5977, 2009. DOI:10.1016/j.ijheatmasstransfer.2009.05.032.
   Web of Science ®Google Scholar
• H. Chung et al., “Augmented Heat Transfer With Intersecting Rib in Rectangular Channels Having Different Aspect Ratios,” Int J Heat Mass Tranr, vol. 88, pp. 357–367, September 2015. DOI:10.1016/j.ijheatmasstransfer.2015.04.033.
   Web of Science ®Google Scholar
• P.T. Ireland, and T.V. Jones, “Liquid Crystal Measurements of Heat Transfer and Surface Shear Stress,” Measurement Science and Technology, vol. 11, no. 7, pp. 969–986, 2000. DOI:10.1088/0957-0233/11/7/313.
   Web of Science ®Google Scholar
• P. Heidrich, J.V. Wolfersdorf, and M. Schnieder, “Experimental Study of Heat Transfer in Gas Turbine Blades Using a Transient Inverse Technique,” Heat Transfer Eng, vol. 30, no. 13, pp. 1077–1086, 2009. DOI:10.1080/01457630902922236.
   Web of Science ®Google Scholar
• J.J. Hwang, “Heat Transfer-Friction Characteristic Comparison in Rectangular Ducts With Slit and Solid Ribs Mounted on One Wall,” ASME J Heat Transfer, vol. 120, no. 3, pp. 709−716, 1998. DOI:10.1115/1.2824340.
   Web of Science ®Google Scholar
• B.H. Chen, and W.H. Huang, “Second-Law Analysis for Heat-Transfer Enhancement on a Rib-Type Turbulence Promoter,” Energy, vol. 13, no. 2, PP.167−175, 1988. DOI:10.1016/0360-5442(88)90042-4.
   Web of Science ®Google Scholar
• C. Schenone, L. Tagliafico, and G. Tanda, “Second Law Performance for Offset Strip-Fin Heat Exchangers,” Heat Transfer Eng, vol. 12, no. 1, pp. 19−27, 1991. DOI:10.1080/01457639108939743.
   Google Scholar
• A. Bejan, Entropy Generation Minimization. The Method of Thermodynamic Optimization on Finite-Size Systems and Finite-Time Processes, Boca Raton: CRC Press, 1996.
   Google Scholar
• A.E. Bergles, A.R. Blumenkrantz, and J. Taborek, “Performance Evaluation Criteria for Selection of Enhanced Heat Transfer Surfaces,” Proc. 5th Int. Heat Transfer Conf., Tokyo, Japan, Sept. 3–7, vol. II, pp. 239–243, 1974.
   Google Scholar
• J.C. Han, J.S. Park, and C.K. Lei, “Heat Transfer Enhancement in Channels With Turbulence Promoters,” ASME J Heat Transfer, vol. 107, no. 3, pp. 628−635, 1985.
   Google Scholar
• J.F. Fan, W.K. Ding, J.F. Zhang, Y.L. He, and W.Q. Tao, “A Performance Evaluation Plot of Enhanced Heat Transfer Techniques Oriented for Energy-Saving,” J Heat and Mass Transfer, vol. 52, no. 1-2, pp. 33−34, 2009. DOI:10.1016/j.ijheatmasstransfer.2008.07.006.
   Web of Science ®Google Scholar
• F. Satta, D. Simoni, and G. Tanda, “Experimental Investigation of Flow and Heat Transfer in a Rectangular Channel With 45° Angled Ribs on One/Two Walls,” Exp Therm Fluid Sci, vol. 37, pp.46−56, February 2012. DOI:10.1016/j.expthermflusci.2011.09.020.
   Web of Science ®Google Scholar