Volumetric Convective Heat Transfer Coefficient Model for Metal Foams

References

• C. Y. Zhao, “Review on thermal transport in high porosity cellular metal foams with open cells,” Int. J. Heat Mass Transf., vol. 55, no. 13–14, pp. 3618–3632, 2012. doi:10.1016/j.ijheatmasstransfer.2012.03.017.
   Web of Science ®Google Scholar
• K. Boomsma, D. Poulikakos, and F. Zwick, “Metal foams as compact high performance heat exchangers,” Mech. Mater., vol. 35, no. 12, pp. 1161–1176, 2003. doi:10.1016/j.mechmat.2003.02.001.
   Web of Science ®Google Scholar
• H. Wang and L. Guo, “Experimental investigation on pressure drop and heat transfer in metal foam filled tubes under convective boundary condition,” Chem. Eng. Sci., vol. 155, no. 1, pp. 438–448, 2016. doi:10.1016/j.ces.2016.08.031.
   Web of Science ®Google Scholar
• X. Han et al., “A review of metal foam and metal matrix composites for heat exchangers and heat sinks,” Heat Transf. Eng., vol. 33, no. 12, pp. 991–1009, 2012. doi:10.1080/01457632.2012.659613.
   Web of Science ®Google Scholar
• V. V. Calmidi, “Transport phenomena in high porosity fibrous metal foams,” Ph.D. thesis, University of Colorado, Boulder, CO., 1998.
   Google Scholar
• S. Y. Kim, B. H. Kang, and J.-H. Kim, “Forced convection from aluminum foam materials in an asymmetrically heated channel,” Int. J. Heat Mass Transfer, vol. 44, no. 7, pp. 1451–1454, 2001. doi:10.1016/S0017-9310(00)00187-3.
   Web of Science ®Google Scholar
• T. S. Zhao and Y. J. Song, “Forced convection in a porous medium heated by a permeable wall perpendicular to flow direction: analyses and measurements,” Int. J. Heat Mass Transfer, vol. 44, no. 5, pp. 1031–1037, 2001. doi:10.1016/S0017-9310(00)00171-X.
   Web of Science ®Google Scholar
• S. Mancin, C. Zilio, A. Diani, and L. Rossetto, “Experimental air heat transfer and pressure drop through copper foams,” Exp. Therm. Fluid Sci., vol. 36, no. 0, pp. 224–232, 2011. doi:10.1016/j.expthermflusci.2011.09.016.
   Web of Science ®Google Scholar
• W. Lu, C. Y. Zhao, and S. A. Tassou, “Thermal analysis on metal-foam filled heat exchangers. Part I: Metal-foam filled pipes,” Int. J. Heat Mass Transf., vol. 49, no. 15–16, pp. 2751–2761, 2006. doi:10.1016/j.ijheatmasstransfer.2005.12.012.
   Web of Science ®Google Scholar
• S. Miwa and S. T. Revankar, “Hydrodynamic characterization of nickel metal foam-effects of pore structure and permeability,” Heat Transf. Eng., vol. 33, no. 9, pp. 800–808, 2011. doi:10.1080/01457632.2012.646872.
   Web of Science ®Google Scholar
• J.-S. Noh, K. B. Lee, and C. G. Lee, “Pressure loss and forced convective heat transfer in an annulus filled with aluminum foam,” Int. Commun. Heat Mass Transf., vol. 33, no. 4, pp. 434–444, 2006. doi:10.1016/j.icheatmasstransfer.2005.11.003.
   Web of Science ®Google Scholar
• S.-C. Tzeng, “Spatial thermal regulation of aluminum foam heat sink using a sintered porous conductive pipe,” Int. J. Heat Mass Transf., vol. 50, no. 1–2, pp. 117–126, 2006. doi:10.1016/j.ijheatmasstransfer.2006.06.034.
   Web of Science ®Google Scholar
• C. Y. Zhao, W. Lu, and S. A. Tassou, “Thermal analysis on metal-foam filled heat exchangers. Part II: Tube heat exchangers,” Int. J. Heat Mass Transf., vol. 49, no. 15–16, pp. 2762–2770, 2006. doi:10.1016/j.ijheatmasstransfer.2005.12.014.
   Web of Science ®Google Scholar
• T. Jeng and S. Tzeng, “Forced convection of metallic foam heat sink under laminar slot jet confined by parallel wall,” Heat Transf. Eng., vol. 28, no. 5, pp. 484–495, 2011. doi:10.1080/01457630601166127.
   Web of Science ®Google Scholar
• Z. Huang, A. Nakayama, K. Yang, C. Yang, and W. Liu, “Enhancing heat transfer in the core flow by using porous medium insert in a tube,” Int. J. Heat Mass Transf., vol. 53, no. 5, pp. 1164–1174, 2009. doi:10.1016/j.ijheatmasstransfer.2009.10.038.
   Web of Science ®Google Scholar
• C. Yang, A. Nakayama, and W. Liu, “Heat transfer performance assessment for forced convection in a tube partially filled with a porous medium,” Int. J. Therm. Sci., vol. 54, no. 0, pp. 98–108, 2012. doi:10.1016/j.ijthermalsci.2011.10.023.
   Web of Science ®Google Scholar
• C. Zhao, T. Kim, T. Lu, and H. Hodson, “Thermal transport in high porosity cellular metal foams,” J. Thermophys. Heat Transf., vol. 18, no. 3, pp. 309–317, 2004. doi:10.2514/1.11780.
   Web of Science ®Google Scholar
• A. Amiri and K. Vafai, “Analysis of dispersion effects and non-thermal equilibrium, non-darcian, variable porosity incompressible flow through porous media,” vol. 37, no. 6, pp. 939–954, 1993.
   Google Scholar
• K. Ichimiya, “A new method for evaluation of heat transfer between solid material and fluid in a porous medium,” J. Heat Transf., vol. 121, no. 4, pp. 978–983, 2007. doi:10.1115/1.2826089.
   Web of Science ®Google Scholar
• M. Golombok, H. Jariwala, and L. C. Shirvill, “Gas-solid heat exchange in a fibrous metallic material measured by a heat regenerator technique,” Int. J. Heat Mass Transf., vol. 33, no. 2, pp. 243–252, 1990. doi:10.1016/0017-9310(90)90095-C.
   Web of Science ®Google Scholar
• L. Younis and R. Viskanta, “Experimental determination of the volumetric heat transfer coefficient between stream of air and ceramic foam,” Int. J. Heat Mass Transf., vol. 36, no. 6, pp. 1425–1434, 1993. doi:10.1016/S0017-9310(05)80053-5.
   Web of Science ®Google Scholar
• J.-J. Hwang, G.-J. Hwang, R.-H. Yeh, and C.-H. Chao, “Measurement of interstitial convective heat transfer and frictional drag for flow across metal foams,” J. Heat Transf., vol. 124, no. 1, pp. 120–129, 2001. doi:10.1115/1.1416690.
   Web of Science ®Google Scholar
• L. Giani, G. Groppi, and E. Tronconi, “Heat transfer characterization of metallic foams,” Ind. Eng. Chem. Res., vol. 44, no. 24, pp. 9078–9085, 2005. doi:10.1021/ie050598p.
   Web of Science ®Google Scholar
• P.-X. Jiang, R.-N. Xu, and W. Gong, “Particle-to-fluid heat transfer coefficients in miniporous media,” Chem. Eng. Sci., vol. 61, no. 22, pp. 7213–7222, 2006. doi:10.1016/j.ces.2006.08.003.
   Web of Science ®Google Scholar
• T. Lu, H. Stone, and M. Ashby, “Heat transfer in open-cell metal foams,” Acta Mater., vol. 46, no. 10, pp. 3619–3635, 1998. doi:10.1016/S1359-6454(98)00031-7.
   Web of Science ®Google Scholar
• C. Zhao, T. Kim, T. Lu, and H. Hodson, “Thermal transport phenomena in porvair metal foams and sintered beds,” University of Cambridge Engineering Department report, Cambridge, UK, 2001.
   Google Scholar
• K. Boomsma, D. Poulikakos, and Y. Ventikos, “Simulations of flow through open cell metal foams using an idealized periodic cell structure,” Int. J. Heat Fluid Flow, vol. 24, no. 6, pp. 825–834, 2003. doi:10.1016/j.ijheatfluidflow.2003.08.002.
   Web of Science ®Google Scholar
• Y. W. Kwon, R. E. Cooke, and C. Park, “Representative unit-cell models for open-cell metal foams with or without elastic filler,” Mater. Sci. Eng.: A, vol. 343, no. 1–2, pp. 63–70, 2003. doi:10.1016/S0921-5093(02)00360-X.
   Web of Science ®Google Scholar
• S. Krishnan, S. V. Garimella, and J. Y. Murthy, “Simulation of thermal transport in open-cell metal foams: effect of periodic unit-cell structure,” J. Heat Transf., vol. 130, no. 2, pp. 024503–024503, 2008. doi:10.1115/1.2789718.
   Web of Science ®Google Scholar
• A. Zukauskas, Convective Heat Transfer in Cross Flow, New York, NY, USA: Wiley, 1987.
   Google Scholar
• C. Hsu and P. Cheng, “Thermal dispersion in a porous medium,” Int. J. Heat Mass Transfer, vol. 33, no. 8, pp. 1587–1597, 1990. doi:10.1016/0017-9310(90)90015-M.
   Web of Science ®Google Scholar
• K. Vafai and C. Tien, “Boundary and inertia effects on flow and heat transfer in porous media,” Int. J. Heat Mass Transf., vol. 24, no. 2, pp. 195–203, 1981. doi:10.1016/0017-9310(81)90027-2.
   Web of Science ®Google Scholar
• K. Boomsma and D. Poulikakos, “On the effective thermal conductivity of a three-dimensionally structured fluid-saturated metal foam,” Int. J. Heat Mass Transfer, vol. 44, no. 4, pp. 827–836, 2011. doi:10.1016/S0017-9310(00)00123-X.
   Web of Science ®Google Scholar
• A. Amiri, K. Vafai, and T. Kuzay, “Effects of boundary conditions on non-darcian heat transfer through porous media and experimental comparisons,” Numer. Heat Transf., Part A: Appl., vol. 27, no. 6, pp. 651–664, 2007. doi:10.1080/10407789508913724.
   Web of Science ®Google Scholar
• B. Alazmi and K. Vafai, “Constant wall heat flux boundary conditions in porous media under local thermal non-equilibrium conditions,” Int. J. Heat Mass Transf., vol. 45, no. 15, pp. 3071–3087, 2002. doi:10.1016/S0017-9310(02)00044-3.
   Web of Science ®Google Scholar
• D.-Y. Lee and K. Vafai, “Analytical characterization and conceptual assessment of solid and fluid temperature differentials in porous media,” Int. J. Heat Mass Transf., vol. 42, no. 3, pp. 423–435, 1999. doi:10.1016/S0017-9310(98)00185-9.
   Web of Science ®Google Scholar