Fundamental Issues, Technology Development, and Challenges of Boiling Heat Transfer, Critical Heat Flux, and Two-Phase Flow Phenomena with Nanofluids

References

• L. Cheng, E. P. Bandarra Filho, and J. R. Thome, “Nanofluid two-phase flow and thermal physics: a new research frontier of nanotechnology and its challenges,” J. Nanosci. Nanotechnol., vol. 8, no. 7, pp. 3315–3332, 2008. doi:10.1166/jnn.2008.413.
   PubMed Web of Science ®Google Scholar
• L. Cheng and L. Liu, “Boiling and two phase flow phenomena of refrigerant-based nanofluids: fundamentals, applications and challenges,” Int. J. Refrig., vol. 36, no. 2, pp. 421–446, 2013. doi:10.1016/j.ijrefrig.2012.11.010.
   Web of Science ®Google Scholar
• S. U. S. Choi, “Enhancing thermal conductivity of fluids with nanoparticles,” in Developments and Applications of Non-Newtonian Flows, D. A. Siginer and H. P. Wang, Eds. New York, NY, USA: ASME, 1995, pp. 99–105. FED-vol. 231/MD-vol. 66.
   Google Scholar
• X. Q. Wang and A. S. Majumdar, “Heat transfer characteristics of nanofluids: a review,” Int. J. Therm. Sci., vol. 46, no. 1, pp. 1–19, 2007. doi:10.1016/j.ijthermalsci.2006.06.010.
   Web of Science ®Google Scholar
• S. K. Das, S. U. S. Choi, and H. Patel, “Heat transfer in nanofluids – A review,” Heat Transf. Eng., vol. 27, no. 10, pp. 3–19, 2006. doi:10.1080/01457630600904593.
   Web of Science ®Google Scholar
• X. Fang et al., “Heat transfer and critical heat flux of nanofluid boiling: a comprehensive review,” Renew. Sustain. Energy Rev., vol. 62, pp. 924–940, 2016. doi:10.1016/j.rser.2016.05.047.
   Web of Science ®Google Scholar
• L. Cheng, “Nanofluid heat transfer technologies,” Recent Patents Eng., vol. 3, no. 1, pp. 1–7, 2009. doi:10.2174/187221209787259875.
   PubMedGoogle Scholar
• J. R. Thome, “Boiling in microchannels: a review of experiment and theory,” Int. J. Heat Fluid Flow, vol. 25, no. 2, pp. 128–139, 2004. doi:10.1016/j.ijheatfluidflow.2003.11.005.
   Web of Science ®Google Scholar
• L. Cheng, “Fundamental issues of critical heat flux phenomena during flow boiling in microscale-channels and nucleate pool boiling in confined spaces,” Heat Transfer Eng., vol. 34, no. 13, pp. 1011–1043, 2013. doi:10.1080/01457632.2013.763538.
   Web of Science ®Google Scholar
• L. Cheng and D. Mewes, “Review of two-phase flow and flow boiling of mixtures in small and mini channels,” Int. J. Multiphase Flow, vol. 32, no. 2, pp. 183–207, 2006. doi:10.1016/j.ijmultiphaseflow.2005.10.001.
   Web of Science ®Google Scholar
• J. R. Thome, “The new frontier in heat transfer: microscale and nanoscale technologies,” Heat Transfer Eng., vol. 27, no. 9, pp. 1–3, 2006. doi:10.1080/01457630600845283.
   Web of Science ®Google Scholar
• L. Cheng and G. Xia, “Fundamental issues, mechanisms and models of flow boiling heat transfer in microscale channels,” Int. J. Heat Mass Transfer, vol. 108, Part A, pp. 97–127, 2017. doi:10.1016/j.ijheatmasstransfer.2016.12.003.
   Web of Science ®Google Scholar
• L. Cheng and J. R. Thome, “Cooling of microprocessors using flow boiling of CO2 in a micro-evaporator: preliminary analysis and performance comparison,” Appl. Therm. Eng., vol. 29, no. 11–12, pp. 2426–2432, 2009. doi:10.1016/j.applthermaleng.2008.12.019.
   Web of Science ®Google Scholar
• J. R. Thome, Enhanced Boiling Heat Transfer, New York, NY, USA: Hemisphere Publ. Corp., 1990.
   Google Scholar
• G. Xia, M. Du, L. Cheng, and W. Wang, “Experimental study on the nucleate boiling heat transfer characteristics of a multi-wall carbon nanotubes water based nanofluid in a confined space,” Int. J. Heat Mass Transfer, vol. 113, pp. 59–69, 2017. doi:10.1016/j.ijheatmasstransfer.2017.05.021.
   Web of Science ®Google Scholar
• L. Cheng, “Flow boiling heat transfer and critical heat flux phenomena of nanofluids in microscale channels,” Int. J. Microscale Nanoscale Therm. Fluid Transp. Phenom, vol. 5, no. 3–4, pp. 201–214, 2014.
   Google Scholar
• L. Cheng, D. Mewes, and A. Luke, “Boiling phenomena with surfactants and polymeric additives: a state-of-the-art review,” Int. J. Heat Mass Transfer, vol. 50, no. 13–14, pp. 2744–2771, 2007. doi:10.1016/j.ijheatmasstransfer.2006.11.016.
   Web of Science ®Google Scholar
• J. A. Eastman, S. U. S. Choi, S. Li, W. Yu, and L. J. Thompson, “Anormalously increased effective thermal conductivities of ethylene glycol-based nanofluids containing copper nanoparticles,” Appl. Phys. Lett., vol. 78, no. 6, pp. 718–720, 2001. doi:10.1063/1.1341218.
   Web of Science ®Google Scholar
• Y. Xuan and Q. Li, “Heat transfer enhancement of nanofluids,” Int. J. Heat Fluid Flow, vol. 21, no. 1, pp. 58–64, 2000. doi:10.1016/S0142-727X(99)00067-3.
   Web of Science ®Google Scholar
• S. K. Das, N. Putra, P. Thiesen, and W. Roetzel, “Temperature dependence of thermal conductivity enhancement for nanofluids,” ASME J. Heat Transfer, vol. 125, no. 4, pp. 567–574, 2003. doi:10.1115/1.1571080.
   Web of Science ®Google Scholar
• S. Lee, S. U. S. Choi, S. Li, and J. A. Eastman, “Measuring thermal conductivity of fluids containing oxide nanoparticles,” ASME J. Heat Transfer, vol. 121, no. 2, pp. 280–289, 1999. doi:10.1115/1.2825978.
   Web of Science ®Google Scholar
• S. P. Jang and S. U. S. Choi, “Role of Brownian motion in the enhanced thermal conductivity of nanofluids,” Appl. Phys. Lett., vol. 84, no. 21, pp. 219–246, 2004. doi:10.1063/1.1756684.
   Web of Science ®Google Scholar
• T. K. Hong, H.-S. Yang, and C. J. Choi, “Study of the enhanced thermal conductivity of Fe nanofluids,” J. Appl. Phys., vol. 97, no. 6, pp. 064311-1–064311-4, 2005. doi:10.1063/1.1861145.
   Web of Science ®Google Scholar
• S. P. Jang and S. U. S. Choi, “Effects of various parameters on nanofluid thermal conductivity,” ASME J. Heat Transfer, vol. 129, no. 5, pp. 617–623, 2007. doi:10.1115/1.2712475.
   Web of Science ®Google Scholar
• S. M. S. Murshed, K. C. Leong, and C. Yang, “Enhanced thermal conductivity of TiO2–water based nanofluids,” Int. J. Therm. Sci., vol. 44, no. 4, pp. 367–373, 2004. doi:10.1016/j.ijthermalsci.2004.12.005.
   Web of Science ®Google Scholar
• S. M. S. Murshed, K. C. Leong, and C. Yang, “Investigations of thermal conductivity and viscosity of nanofluids,” Int. J. Therm. Sci., vol. 47, no. 5, pp. 560–568, 2008. doi:10.1016/j.ijthermalsci.2007.05.004.
   Web of Science ®Google Scholar
• J. Y. Huang et al., “Superplastic single-walled carbon nanotubes,” Nature, vol. 439, pp. 281, 2006. doi:10.1038/439281a.
   PubMed Web of Science ®Google Scholar
• M. J. Biercuk, M. C. Llaguno, M. Radosavljevic, J. K. Hyun, and A. T. Johnson, “Carbon nanotube composites for thermal management,” Appl. Phys. Lett., vol. 80, no. 15, pp. 2767–2769, 2002. doi:10.1063/1.1469696.
   Web of Science ®Google Scholar
• J. Hone, M. Whitney, and A. Zettl, “Thermal conductivity of single-walled carbon nanotubes,” Synth. Met., vol. 103, no. 1–3, pp. 2498–2499, 1999. doi:10.1016/S0379-6779(98)01070-4.
   Web of Science ®Google Scholar
• S. Berber, Y. K. Kwon, and D. Tomanek, “Unusually high thermal conductivity of carbon nanotubes,” Phys. Rev. Lett., vol. 84, no. 20, pp. 4613–4616, 2000. doi:10.1103/PhysRevLett.84.4613.
   PubMed Web of Science ®Google Scholar
• P. Kim, L. Shi, A. Majumdar, and P. L. Mceuen, “Thermal transport measurements of individual multiwalled nanotubes,” Phys. Rev. Lett., vol. 87, no. 21, pp. 215502-1–215502-4, 2001. doi:10.1103/PhysRevLett.87.215502.
   Web of Science ®Google Scholar
• S. U. S. Choi, Z. G. Zhang, W. Yu, F. E. Lockwood, and E. A. Grulke, “Anomalous thermal conductivity enhancement in nanotube suspensions,” Appl. Phys. Lett., vol. 79, no. 14, pp. 2252–2254, 2001. doi:10.1063/1.1408272.
   Web of Science ®Google Scholar
• H. Xie, H. Lee, W. Youn, and M. Choi, “Nanofluids containing multiwalled carbon nanotubes and their enhanced thermal conductivities,” J. Appl. Phys., vol. 94, no. 8, pp. 4967–4971, 2003. doi:10.1063/1.1613374.
   Web of Science ®Google Scholar
• M. S. Liu, M. C. C. Lin, I. T. Huang, and C. C. Wang, “Enhancement of thermal conductivity with carbon nanotube for nanofluids,” Int. Comm. Heat Mass Transfer, vol. 32, no. 9, pp. 1202–1210, 2005. doi:10.1016/j.icheatmasstransfer.2005.05.005.
   Web of Science ®Google Scholar
• M. J. Assael, I. N. Metaxa, J. Arvanitidis, D. Christofilos, and C. Lioutas, “Thermal conductivity enhancement in aqueous suspensions of carbon multi-walled and double-walled nanotubes in the presence of two different dispersants,” Int. J. Thermophys., vol. 26, no. 3, pp. 647–664, 2005. doi:10.1007/s10765-005-5569-3.
   Web of Science ®Google Scholar
• D. S. Wen and Y. L. Ding, “Effective thermal conductivity of aqueous suspensions of carbon nanotubes nanofluids,” J. Thermophys. Heat Transfer, vol. 18, no. 4, pp. 481–485, 2004. doi:10.2514/1.9934.
   Web of Science ®Google Scholar
• Y. Ding, H. Alias, D. Wen, and R. A. Williams, “Heat transfer of aqueous suspensions of carbon nanotubes,” Int. J. Heat Mass Transfer, vol. 49, no. 1–2, pp. 240–250, 2006. doi:10.1016/j.ijheatmasstransfer.2005.07.009.
   Web of Science ®Google Scholar
• R. L. Hamilton and O. K. Crosser, “Thermal conductivity of heterogeneous two component systems,” Ind. Eng. Chem. Fundamentals, vol. 1, no. 3, pp. 187–191, 1962. doi:10.1021/i160003a005.
   Web of Science ®Google Scholar
• P. Keblinski, S. R. Phillpot, S. U. S. Choi, and J. A. Eastman, “Mechanisms of heat flow in suspensions of nano-sized particles (nanofluids),” Int. J. Heat Mass Transfer, vol. 45, no. 4, pp. 855–863, 2002. doi:10.1016/S0017-9310(01)00175-2.
   Web of Science ®Google Scholar
• J. A. Eastman, S. R. Phillpot, S. U. S. Choi, and P. Keblinski, “Thermal transport in nanofluids,” Ann. Rev. Mater. Res., vol. 34, pp. 219–246, 2004. doi:10.1146/annurev.matsci.34.052803.090621.
   Web of Science ®Google Scholar
• H. Xie, W. Yu, Y. Li, and L. Chen, “Discussion on the thermal conductivity enhancement of nanofluids,” Nanoscale Res. Lett., vol. 124, no. 6, pp. 1–12, 2011.
   Google Scholar
• D. Lee, J.-W. Kim, and B. G. Kim, “A new parameter to control heat transport in nanofluids: surface charge state of the particle in suspension,” J. Phys. Chem. B, vol. 110, no. 9, pp. 4323–4328, 2006. doi:10.1021/jp057225m.
   PubMed Web of Science ®Google Scholar
• P. Vadasz, “Heat conduction in nanofluid suspensions,” ASME J. Heat Transfer, vol. 128, no. 5, pp. 465–477, 2006. doi:10.1115/1.2175149.
   Web of Science ®Google Scholar
• Y. Xuan, Q. Li, and W. Hu, “Aggregation structure and thermal conductivity of nanofluids,” AIChE J., vol. 49, no. 4, pp. 1038–1043, 2003. doi:10.1002/aic.690490420.
   Web of Science ®Google Scholar
• D. P. Kulkarni, D. K. Das, and S. L. Patil, “Effect of temperature on rheological properties of copper oxide nanoparticles dispersed in propylene glycol and water mixture,” J. Nanosci Nanotechnol., vol. 7, no. 7, pp. 2318–2322, 2007. doi:10.1166/jnn.2007.437.
   PubMed Web of Science ®Google Scholar
• D. P. Kulkarni, D. K. Das, and G. A. Chukwu, “Temperature dependent rheological property of copper oxide nanoparticles (nanofluid),” J. Nanoscj. Nanotechnol., vol. 6, no. 4, pp. 1150–1154, 2006. doi:10.1166/jnn.2006.187.
   PubMed Web of Science ®Google Scholar
• C. T. Nguyen et al., “Viscosity data for Al2O3–water nanofluid-hysteresis: is heat transfer enhancement using nanofluids reliable?,” Int. J. Therm. Sci., vol. 47, no. 2, pp. 103–111, 2008. doi:10.1016/j.ijthermalsci.2007.01.033.
   Web of Science ®Google Scholar
• A. Einstein, “Eine neue bestimmung der moleküldimensionen,” Ann. Physik., vol. 324, no. 2, pp. 289–306, 1906. doi:10.1002/andp.19063240204.
   Google Scholar
• D. Shin and D. Banerjee, “Enhanced specific heat of silica nanofluid,” ASME J. Heat Transfer, vol. 133, no. 2, pp. 024510-1–024510-4, 2011. doi:10.1115/1.4002600.
   Web of Science ®Google Scholar
• D. Shin and D. Banerjee, “Enhancement of specific heat capacity of high-temperature silica-nanofluids synthesized in alkali chloride salt eutectics for solar thermal-energy storage applications,” Int. J. Heat Mass Transfer, vol. 54, no. 5–6, pp. 1064–1070, 2011. doi:10.1016/j.ijheatmasstransfer.2010.11.017.
   Web of Science ®Google Scholar
• H. Tiznobaik and D. Shin, “Enhanced specific heat capacity of high-temperature molten salt-based nanofluids,” Int. J. Heat Mass Transfer, vol. 57, no. 2, pp. 542–548, doi:10.1016/j.ijheatmasstransfer.2012.10.062.
   Web of Science ®Google Scholar
• G. Ramesh and N. K. Prabhu, “Review of thermo-physical properties, wetting and heat transfer characteristics of nanofluids and their applicability in industrial quench heat treatment,” Nanoscale Res. Lett., vol. 6, no. 1, paper 334, pp. 1–15, 2011. doi:10.1186/1556-276X-6-334.
   Web of Science ®Google Scholar
• I. C. Nelson and D. Banerjee, “Flow loop experiments using polyalphaolefin nanofluids,” J. Thermophys. Heat Transfer, vol. 23, no. 4, pp. 752–761, 2009. doi:10.2514/1.31033.
   Web of Science ®Google Scholar
• R. S. Vajjha and D. K. Das, “Specific heat measurement of three nanofluids and development of new correlations,” ASME J. Heat Transfer, vol. 131, no. 7, pp. 071601-1–071601-7, 2009. doi:10.1115/1.3090813.
   Web of Science ®Google Scholar
• Y. Xuan and W. Roetzel, “Conceptions for heat transfer correlation of nanofluids,” Int. J. Heat Mass Transfer, vol. 43, no. 19, pp. 3701–3707, 2000. doi:10.1016/S0017-9310(99)00369-5.
   Web of Science ®Google Scholar
• J. Buobgiorno, “Convective transport in nanofluid,” ASME J. Heat Transfer, vol. 128, no. 3, pp. 240–250, 2005. doi:10.1115/1.2150834.
   Web of Science ®Google Scholar
• H. S. Xue, J. R. Fan, Y. C. Hu, R. H. Hong, and K. F. Cen, “The interface effect of carbon nanotube suspension on thermal performance of a two-phase closed thermosyphon,” J. Appl. Phys., vol. 100, no. 10, pp. 104909-1–104909-5, 2006. doi:10.1063/1.2357705.
   Web of Science ®Google Scholar
• S. Tanvir and L. Qiao, “Surface tension of nanofluid-type fuels containing suspended nanomaterials,” Nanoscale Res. Lett., vol. 7, paper 226, pp. 1–10, 2012. doi:10.1186/1556-276X-7-226.
   PubMed Web of Science ®Google Scholar
• R. Kamatchi, S. Venkatachalapathy, and C. Nithya, “Experimental investigation and mechanism of critical heat flux enhancement in pool boiling heat transfer with nanofluids,” Heat Mass Transfer, vol. 52, no. 11, pp. 2357–2366, 2016. doi:10.1007/s00231-015-1749-2.
   Web of Science ®Google Scholar
• S. Tanvir, S. Jain, and L. Qiao, “Latent heat of vaporization of nanofluids: measurements and molecular dynamics simulations,” J. Appl. Phys., vol. 118, no. 1, pp. 014902-1–014902-8, 2015. doi:10.1063/1.4922967.
   Web of Science ®Google Scholar
• S. Lee et al., “Experimental investigation of the latent heat of vaporization in aqueous nanofluids,” Appl. Phys. Lett., vol. 104, no. 15, pp. 151908-1–151908-4, 2014. doi:10.1063/1.4872176.
   Web of Science ®Google Scholar
• Y. M. Yang and J. R. Maa, “Boiling of suspension of solid particles in water,” Int. J. Heat Mass Transfer, vol. 27, no. 1, pp. 145–147, 1984. doi:10.1016/0017-9310(84)90248-5.
   Web of Science ®Google Scholar
• J. P. Tu, N. Dinh, and T. Theofanous, “An experimental study of nanofluid boiling heat transfer,” Proc. 6th Int. Sym. Heat Transfer, Beijing, China, June 15–19, 2004.
   Google Scholar
• D. Wen and Y. Ding, “Experimental investigation into pool boiling heat transfer of aqueous based γ-alumina nanofluids,” J. Nanoparticle Res., vol. 7, no. 2–3, pp. 265–274, 2005. doi:10.1007/s11051-005-3478-9.
   Web of Science ®Google Scholar
• D. S. Wen, Y. L. Ding, and R. A. Williams, “Pool boiling heat transfer of aqueous based TiO2 nanofluids,” J. Enhanced Heat Transfer, vol. 13, no. 3, pp. 231–244, 2006. doi:10.1615/JEnhHeatTransf.v13.i3.30.
   Web of Science ®Google Scholar
• M. Chopkar, A. K. Das, I. Manna, and P. K. Das, “Pool boiling heat transfer characteristics of ZrO2–water nanofluids from a flat surface in a pool,” Heat Mass Transfer, vol. 44, no. 8, pp. 999–1004, 2008. doi:10.1007/s00231-007-0345-5.
   Web of Science ®Google Scholar
• S. Witharana, “Boiling of refrigerants on enhanced surfaces and boiling of nanofluids,” Ph.D. thesis, The Royal Institute of Technology, Sweden, 2003.
   Google Scholar
• C. Y. Yang and D. W. Liu, “Effect of nano-particles for pool boiling heat transfer of refrigerant 141B on horizontal tubes,” Int. J. Microscale Nanoscale Therm. Fluid Transp. Phenom., no. 3, pp. 233–243, 2010.
   Google Scholar
• M. G. Cooper, “Saturation nucleate pool boiling – a simple correlation,” Int. Chem. Eng. Symp. Ser., vol. 86, no. 2, pp. 785–792, 1984.
   Google Scholar
• S. K. Das, N. Putra, and W. Roetzel, “Pool boiling characteristics of nanofluids,” Int. J. Heat Mass Transfer, vol. 46, no. 5, pp. 851–862, 2003. doi:10.1016/S0017-9310(02)00348-4.
   Web of Science ®Google Scholar
• I. C. Bang and S. H. Chang, “Boiling heat transfer performance and phenomena of Al2O3–water nano-fluids from a plain surface in a pool,” Int. J. Heat Mass Transfer, vol. 48, no. 12, pp. 2407–2419, 2005. doi:10.1016/j.ijheatmasstransfer.2004.12.047.
   Web of Science ®Google Scholar
• C. H. Li, B. X. Wang, and X. F. Peng, “Experimental investigations on boiling of nano-particle suspensions,” 5th Boiling Heat Transfer Conf., Montego Bay, Jamaica, May 4–8, 2003.
   Google Scholar
• S. K. Das, N. Putra, and W. Roetzel, “Pool boiling characteristics of nanofluids on horizontal narrow tubes,” Int. J. Multiphase Flow, vol. 29, no. 8, pp. 1237–1247, 2003. doi:10.1016/S0301-9322(03)00105-8.
   Web of Science ®Google Scholar
• S. M. You, J. H. Kim, and K. H. Kim, “Effect of nanoparticles on critical heat flux of water in pool boiling heat transfer,” Appl. Phys. Lett., vol. 83, no. 16, pp. 3374–3376, 2003. doi:10.1063/1.1619206.
   Web of Science ®Google Scholar
• J. H. Kim, K. H. Kim, and S. M. You, “Pool boiling heat transfer in saturated nanofluids,” 2004 -ASME Int. Mech. Eng. Congr. & Exp., Anaheim, CA, USA, Heat Transfer, Nov. 13–19, 2004, vol. 2, pp. 621–628.
   Google Scholar
• P. Vassallo, R. Kumar, and S. D'Amico, “Pool boiling heat transfer experiments in silica–water nano-fluids,” Int. J. Heat Mass Transfer, vol. 47, no. 2, pp. 407–411, 2004. doi:10.1016/S0017-9310(03)00361-2.
   Web of Science ®Google Scholar
• G. Prakash Narayan, A. K. B. G. Sateesh, and S. K. Das, “Effect of surface orientation on pool boiling heat transfer of nanoparticle suspensions,” Int. J. Multiphase Flow, vol. 34, no. 2, pp. 145–160, 2008. doi:10.1016/j.ijmultiphaseflow.2007.08.004.
   Web of Science ®Google Scholar
• X. Tang, Y. H. Zhao, and Y. H. Diao, “Experimental investigation of the nucleate pool boiling heat transfer characteristics of δ-Al2O3-R141b nanofluids on a horizontal plate,” Exp. Therm. Fluid Sci., vol. 52, pp. 88–96, 2014. doi:10.1016/j.expthermflusci.2013.08.025.
   Web of Science ®Google Scholar
• Y. R. He, H. R. Li, Y. W. Hu, and J. Q. Zhu, “Boiling heat transfer characteristics of ethylene glycol and water mixture based ZnO nanofluids in a cylindrical vessel,” Int. J. Heat Mass Transfer, vol. 98, pp. 611–615, 2016. doi:10.1016/j.ijheatmasstransfer.2016.03.052.
   Web of Science ®Google Scholar
• S. N. Shoghl, M. Bahrami, and M. Jamialahmadi, “The boiling performance of ZnO, α-Al2O3 and MWCNTs–water nanofluids: an experimental study,” Exp. Therm. Fluid Sci., vol. 80, pp. 27–39, 2017. doi:10.1016/j.expthermflusci.2016.07.024.
   Web of Science ®Google Scholar
• Z. Shahmoradi, N. Etesami, and M. N. Esfahany, “Pool boiling characteristics of nanofluid on flat plate based on heater surface analysis,” Int. Comm. Heat Mass Transfer, vol. 47, no. 5, pp. 113–120, 2013. doi:10.1016/j.icheatmasstransfer.2013.06.006.
   Web of Science ®Google Scholar
• M. M. Sarafra and F. Hormozi, “Nucleate pool boiling heat transfer characteristics of dilute Al2O3–ethyleneglycol nanofluids,” Int. Comm. Heat Mass Transfer, vol. 58, pp. 96–104, 2014. doi:10.1016/j.icheatmasstransfer.2014.08.028.
   Web of Science ®Google Scholar
• M. M. Sarafraz and F. Hormozi, “Experimental investigation on the pool boiling heat transfer to aqueous multi-walled carbon nanotube nanofluids on the micro-finned surfaces,” Int. J. Therm. Sci., vol. 100, no. 22, pp. 255–266, 2015.
   Google Scholar
• M. M. Sarafraz and F. Hormozi, “Pool boiling heat transfer to dilute copper oxide aqueous nanofluids,” Int. J. Therm. Sci., vol. 90, pp. 224–237, 2015. doi:10.1016/j.ijthermalsci.2014.12.014.
   Web of Science ®Google Scholar
• Y. H. Diao, C. Z. Li, Y. H. Zhao, Y. Liu, and S. Wang, “Experimental investigation on the pool boiling characteristics and critical heat flux of Cu-R141b nanorefrigerant under atmospheric pressure,” Int. J. Heat Mass Transfer, vol. 89, pp. 110–115, 2015. doi:10.1016/j.ijheatmasstransfer.2015.05.043.
   Web of Science ®Google Scholar
• K. J. Park and D. Jung, “Boiling heat transfer enhancement with carbon nanotubes for refrigerants used in building air-conditioning,” Energy Buildings, vol. 39, no. 9, pp. 1061–1064, 2007. doi:10.1016/j.enbuild.2006.12.001.
   Web of Science ®Google Scholar
• I. C. Bang, S. H. Chang, and W. P. Baek, “Direct observation of a liquid film under a vapor environment in a pool boiling using a nanofluid,” Appl. Phys. Lett., vol. 86, no. 13, pp. 134107-1–134107-3, 2005. doi:10.1063/1.1873053.
   Web of Science ®Google Scholar
• C. H. Chon, S. Paik, J. B. Tipton Jr., and K. D. Kihm, “Effect of nanoparticle sizes and number densities on the evaporation and dryout characteristics for strongly pinned nanofluid droplets,” Langmuir, vol. 23, no. 6, pp. 2953–2960, 2007. doi:10.1021/la061661y.
   PubMed Web of Science ®Google Scholar
• K. Sefiane, “On the role of structural disjoining pressure and contact line pinning in critical heat flux enhancement during boiling of nanofluids,” Appl. Phys. Lett., vol. 89, no. 4, pp. 044106-1–044106-3, 2006. doi:10.1063/1.2222283.
   Web of Science ®Google Scholar
• S. J. Kim, I. C. Bang, J. Buongiorno, and L. W. Hu, “Surface wettability change during pool boiling of nanofluids and its effect on critical heat flux,” Int. J. Heat Mass Transfer, vol. 50, no. 19–20, pp. 4105–4116, 2007. doi:10.1016/j.ijheatmasstransfer.2007.02.002.
   Web of Science ®Google Scholar
• S. J. Kim, I. C. Bang, J. Buongiorno, and L. W. Hu, “Study of pool boiling and critical heat flux enhancement in nanofluids,” Bull. Polish Acad. Sci., vol. 55, no. 2, pp. 211–216, 2007.
   Web of Science ®Google Scholar
• H. Kim, J. Kim, and M. H. Kim, “Effect of nanoparticles on CHF enhancement in pool boiling of nano-fluids,” Int. J. Heat Mass Transfer, vol. 49, no. 25–26, pp. 5070–5074, 2006. doi:10.1016/j.ijheatmasstransfer.2006.07.019.
   Web of Science ®Google Scholar
• H. D. Kim, J. Kim, and M. H. Kim, “Experimental studies on CHF characteristics of nano-fluids at pool boiling,” Int. J. Multiphase Flow, vol. 33, no. 7, pp. 691–706, 2007. doi:10.1016/j.ijmultiphaseflow.2007.02.007.
   Web of Science ®Google Scholar
• H. D. Kim and M. H. Kim, “Experimental study of the characteristics and mechanism of pool boiling CHF enhancement using nanofluids,” Heat and Mass Transfer, vol. 45, no. 7, pp. 991–998, 2009. doi:10.1007/s00231-007-0318-8.
   Web of Science ®Google Scholar
• D. Milanova and R. Kumar, “Role of ions in pool boiling heat transfer of pure and silica nanofluids,” Appl. Phys. Lett., vol. 87, no. 23, pp. 233107-1–233107-3, 2005. doi:10.1063/1.2138805.
   Web of Science ®Google Scholar
• H. S. Xue, J. R. Fan, R. H. Hong, and Y. C. Hu, “Characteristic boiling curve of carbon nanotube nanofluid as determined by the transient calorimeter technique,” Appl. Phys. Lett., vol. 90, no. 18, pp. 184107-1–184107-3, 2007. doi:10.1063/1.2736653.
   Web of Science ®Google Scholar
• K. J. Park, D. Jung, and S. E. Shim, “Nucleate boiling heat transfer in aqueous solutions with carbon nanotubes up to critical heat fluxes,” Int. J. Multiphase Flow, vol. 35, no. 6, pp. 525–532, 2009. doi:10.1016/j.ijmultiphaseflow.2009.02.015.
   Web of Science ®Google Scholar
• J. Gilbert Moreno, S. Oldenburg, S. M. You, and J. H. Kim, “Pool boiling heat transfer of alumina–water, zinc oxide–water and alumina–water ethylene glycol nanofluids,” HT2005, San Francisco, CA, USA, Jul. 17–22, 2005, pp. 625–632.
   Google Scholar
• B. Jo. P. S. Jeon, J. Yoo, and J. H. Kim, “Wide range parametric study for the pool boiling of nano-fluids with a circular plate heater,” J. Vis., vol. 12, no. 1, pp. 7–46, 2009.
   Google Scholar
• H. Skashita, “Pressure effect on CHF enhancement in pool boiling of nanofluids,” J. Nucl. Sci. Technol., vol. 53, no. 6, pp. 797–802, 2015. doi:10.1080/00223131.2015.1072482.
   Web of Science ®Google Scholar
• M. M. Sarafraz, T. Kiani, and F. Hormozi, “Critical heat flux and pool boiling heat transfer analysis of synthesized zirconia aqueous nanofluids,” Int. Comm. Heat Mass Transfer, vol. 70, pp. 75–83, 2016. doi:10.1016/j.icheatmasstransfer.2015.12.008.
   Web of Science ®Google Scholar
• M. N. Sarafraz, F. Hormozi, M. Silakhori, and S. M. Peyghambarzadeh, “On the fouling formation of functionalized and non-functionalized carbon nanotube nanofluids under pool boiling condition,” Appl. Therm. Eng., vol. 95, pp. 433–444, 2016. doi:10.1016/j.applthermaleng.2015.11.071.
   Web of Science ®Google Scholar
• S. M. Kwark, R. Kumar, G. Moreno, J. Yoo, and S. M. You, “Pool boiling characteristics of low concentration nanofluids,” Int. J. Heat Mass Transfer, vol. 53, no. 5–6, pp. 927–981, 2010.
   Web of Science ®Google Scholar
• S. Ujereh, T. Fisher, and I. Mudawar, “Effects of carbon nanotube arrays on nucleate pool boiling,” Int. J. Heat Mass Transfer, vol. 50, no. 19–20, pp. 4023–4038, 2007. doi:10.1016/j.ijheatmasstransfer.2007.01.030.
   Web of Science ®Google Scholar
• H. S. Ahn et al., “Pool boiling experiments on multiwalled carbon nanotube (MWCNT) forests,” ASME J. Heat Transfer, vol. 128, no. 12, pp. 1335–1342, 2006. doi:10.1115/1.2349511.
   Web of Science ®Google Scholar
• S. Khandekar, Y. M. Joshi, and B. Mehta, “Thermal performance of closed two-phase thermosyphon using nanofluids,” Int. J. Therm. Sci., vol. 47, no. 6, pp. 659–667, 2008. doi:10.1016/j.ijthermalsci.2007.06.005.
   Web of Science ®Google Scholar
• K. Henderson, Y. G. Park, and L. P. Liu, “Flow-boiling heat transfer of R-134a-based nanofluids in a horizontal tube,” Int. J. Heat Mass Transfer, vol. 53, no. 5–6, pp. 944–951, 2010. doi:10.1016/j.ijheatmasstransfer.2009.11.026.
   Web of Science ®Google Scholar
• Z. H. Liu, X. F. Yang, and G. L. Guo, “Effect of nanoparticles in nanofluids on thermal performance in a miniature thermosyphon,” J. Appl. Phys., vol. 102, no. 1, pp. 013526-1–013526-8, 2007. doi:10.1063/1.2748348.
   Web of Science ®Google Scholar
• H. B. Ma et al., “An experimental investigation of heat transport capability in a nanofluid oscillating heat pipe,” ASME J. Heat Transfer, vol. 128, no. 11, pp. 1213–1216, 2006. doi:10.1115/1.2352789.
   Web of Science ®Google Scholar
• Z. H. Liu, J. G. Xiong, and R. Bao, “Boiling heat transfer characteristics of nanofluids in a flat heat pipe evaporator with micro-grooved heating surface,” Int. J. Multiphase Flow, vol. 33, no. 12, pp. 1284–1295, 2007. doi:10.1016/j.ijmultiphaseflow.2007.06.009.
   Web of Science ®Google Scholar
• Z. H. Liu and Y. H. Qiu, “Boiling heat transfer characteristics of nanofluids jet impingement on a plate surface,” Heat Mass Transfer, vol. 43, no. 7, pp. 699–706, 2007. doi:10.1007/s00231-006-0159-x.
   Web of Science ®Google Scholar
• Y. Park et al., “Nanoparticles to enhance evaporative heat transfer,” The 22nd Int. Congr. Refrig., Beijing, Aug. 21–26, 2007, in CD-Room, Paper number: ICR07-B1-309.
   Google Scholar
• M. A. Akhavan-Behabadi, M. Nasr, and S. Baqeri, “Experimental investigation of flow boiling heat transfer of R-600a/oil/CuO in a plain horizontal tube,” Exp. Therm. Fluid Sci., vol. 58, pp. 105–111, 2014. doi:10.1016/j.expthermflusci.2014.06.013.
   Web of Science ®Google Scholar
• H. Setoodeh, A. Keshavarz, A. Ghasemian, and A. Nasouhi, “Subcooled flow boiling of alumina/water nanofluid in a channel with a hot spot: an experimental study,” Appl. Therm. Eng., vol. 90, pp. 384–394, 2015. doi:10.1016/j.applthermaleng.2015.07.016.
   Web of Science ®Google Scholar
• V. Nikkhah, M. M. Sarafraz, F. Hormozi, S. M. Peyghambarzadeh, “Particulate fouling of CuO–water nanofluid at isothermal diffusive condition inside the conventional heat exchanger – experimental and modeling,” Exp. Therm. Fluid. Sci., vol. 60, pp. 83–95, 2015. doi:10.1016/j.expthermflusci.2014.08.009.
   Web of Science ®Google Scholar
• M. M. Sarafraz, F. Hormozi, S. M. Peyghambarzadeh, and N. Vaeli, “Upward flow boiling to DI–water and CuO nanofluids inside the concentric annuli,” J. Appl. Fluid Mech., vol. 8, no. 4, pp. 651–659, 2015. doi:10.18869/acadpub.jafm.67.223.19404.
   Web of Science ®Google Scholar
• G. Paul, P. K. Das, and I. Manna, “Assessment of the process of boiling heat transfer during rewetting of a vertical tube bottom flooded by alumina nanofluid,” Int. J. Heat Mass Transfer, vol. 94, pp. 390–402, 2016. doi:10.1016/j.ijheatmasstransfer.2015.11.013.
   Web of Science ®Google Scholar
• M. M. Sarafraz and F. Hormozi, “Comparatively experimental study on the boiling thermal performance of metal oxide and multi-walled carbon nanotube nanofluids,” Powder Technol., vol. 287, pp. 412–430, 2016. doi:10.1016/j.powtec.2015.10.022.
   Web of Science ®Google Scholar
• Y. Wang and G. H. Su, “Experimental investigation on nanofluid flow boiling heat transfer in a vertical tube under different pressure conditions,” Exp. Therm. Fluid Sci., vol. 77, pp. 116–123, 2016. doi:10.1016/j.expthermflusci.2016.04.014.
   Web of Science ®Google Scholar
• S. J. Kim, T. McKrell, J. Buongiorno, and L. W. Hu, “Alumina nano-particles enhance the flow boiling critical heat flux of water at low pressure,” ASME J. Heat Transfer, vol. 130, no. 4, pp. 044501-1–044501-3, 2008. doi:10.1115/1.2818787.
   Web of Science ®Google Scholar
• S. J. Kim, T. McKrell, J. Buongiorno, and L. W. Hu, “Experimental study of flow critical heat flux in alumina–water, zinc-oxide–water, and diamond–water nanofluids,” ASME J. Heat Transfer, vol. 131, no. 4, pp. 043204-1–043204-7, 2009. doi:10.1115/1.3072924.
   Web of Science ®Google Scholar
• H. S. Ahn et al., “Experimental study of critical heat flux enhancement during forced convective flow boiling of nanofluid on a short heated surface,” Int. J. Multiphase Flow, vol. 36, no. 5, pp. 375–384, 2010. doi:10.1016/j.ijmultiphaseflow.2010.01.004.
   Web of Science ®Google Scholar
• Y. Katto and C. Kurata, “Critical heat flux of saturated convective boiling on uniformly heated plates in a parallel flow,” Int. J. Multiphase Flow, vol. 6, no. 6, pp. 575–582, 1980. doi:10.1016/0301-9322(80)90052-X.
   Web of Science ®Google Scholar
• H. S. Ahn, S. Kang, H. Jo, H. Kim, and M. H. Kim, “Visualization study of the effects of nanoparticles surface deposition on convective flow boiling CHF from a short heated wall,” Int. J. Multiphase Flow, vol. 37, no. 2, pp. 215–228, 2011. doi:10.1016/j.ijmultiphaseflow.2010.09.005.
   Web of Science ®Google Scholar
• H. S. Ahn, S. H. Kang, and M. H. Kim, “Visualized effect of alumina nanoparticles surface deposition on water flow boiling heat transfer,” Exp. Therm. Fluid Sci., vol. 37, pp. 154–163, 2012. doi:10.1016/j.expthermflusci.2011.10.017.
   Web of Science ®Google Scholar
• T. I. Kim, W. J. Chang, and S. H. Chang, “An experimental study on CHF enhancement in flow boiling using Al2O3 nano-fluid,” Int. J. Heat Mass Transfer, vol. 53, no. 5–6, pp. 1015–1022, 2010. doi:10.1016/j.ijheatmasstransfer.2009.11.011.
   Web of Science ®Google Scholar
• T. I. Kim, W. J. Chang, and S. H. Chang, “Flow boiling CHF enhancement using Al2O3 nanofluid and an Al2O3 nanoparticle deposited tube,” Int. J. Heat Mass Transfer, vol. 54, no. 9–10, pp. 2021–2025, 2011. doi:10.1016/j.ijheatmasstransfer.2010.12.029.
   Web of Science ®Google Scholar
• S. W. Lee et al., “Critical heat flux enhancement in flow boiling of Al2O3 and SiC nanofluids under low pressure and low flow conditions,” Nucl. Eng. Technol., vol. 44, no. 4, pp. 429–436, 2012. doi:10.5516/NET.04.2012.516.
   Web of Science ®Google Scholar
• S. W. Lee, K. M. Kim, and I. C. Bang, “Study on flow boiling critical heat flux enhancement of graphene oxide/water nanofluid,” Int. J. Heat Mass Transfer, vol. 65, pp. 348–356, 2013. doi:10.1016/j.ijheatmasstransfer.2013.06.013.
   Web of Science ®Google Scholar
• H. S. Ahn and M. H. Kim, “The effect of micro/nanoscale structures on CHF enhancement,” Nucl. Eng. Technol., vol. 43, no. 3, pp. 205–216, 2011. doi:10.5516/NET.2011.43.3.205.
   Web of Science ®Google Scholar
• G. Dewitt, T. Makrell, J. Buongiorno, L. W. Hu, and R. J. Park, “Experimental study of critical heat flux with alumina–water nanofluids in downward-facing channels for in-vessel retention applications,” Nucl. Eng. Technol., vol. 45, no. 3, pp. 335–346, 2013. doi:10.5516/NET.02.2012.075.
   Web of Science ®Google Scholar
• T. Lee, J. H. Lee and Y. H. Jeong, “Flow boiling critical heat flux characteristics of magnetic nanofluid at atmospheric pressure and low mass flux conditions,” Int. J. Heat Mass Transfer, vol. 56, no. 1–2, pp. 101–106, 2013. doi:10.1016/j.ijheatmasstransfer.2012.09.030.
   Web of Science ®Google Scholar
• H. Aminfar, M. Mohammadpourfard, and R. Maroofiazar, “Experimental study on the effect of magnetic field on critical heat flux of ferrofluid flow boiling in a vertical annulus,” Exp. Therm. Fluid Sci., vol. 58, pp. 156–169, 2014. doi:10.1016/j.expthermflusci.2014.06.023.
   Web of Science ®Google Scholar
• M. Boudouh, H. L. Gualous, and M. De Labachelerie, “Local convective boiling heat transfer and pressure drop of nanofluid in narrow rectangular channels,” Appl. Therm. Eng., vol. 30, no. 17–18, pp. 2619–2631, 2010. doi:10.1016/j.applthermaleng.2010.06.027.
   Web of Science ®Google Scholar
• J. Lee and I. Mudawar, “Assessment of the effectiveness of nanofluids for single-phase and two-phase heat transfer in micro-channels,” Int. J. Heat Mass Transfer, vol. 50, no. 3–4, pp. 452–463, 2007. doi:10.1016/j.ijheatmasstransfer.2006.08.001.
   Web of Science ®Google Scholar
• A. A. Chehade, H. L. Gualous, S. Le Masson, F. Fardoun, and A. Besq, “Boiling local heat transfer enhancement in minichannels using nanofluids,” Nanoscale Res. Lett., vol. 8, no. 130, pp. 1–20, 2013.
   PubMed Web of Science ®Google Scholar
• G. Duursma, K. Sefiane, A. Dehaene, S. Harmand, and Y. Wang, “Flow and heat transfer of single- and two-phase boiling of nanofluids in microchannel,” Heat Transf. Eng., vol. 36, no. 14–15, pp. 1252–1265, 2015. doi:10.1080/01457632.2014.994990.
   Web of Science ®Google Scholar
• V. Khanikar, I. Mudawar, and T. Fisher, “Effect of carbon nanotube coating on flow boiling in a micro-channel,” Int. J. Heat Mass Transfer, vol. 52, no. 15–16, pp. 3805–3817, 2009. doi:10.1016/j.ijheatmasstransfer.2009.02.007.
   Web of Science ®Google Scholar
• S. Vafaei and D. Wen, “Critical heat flux (CHF) of subcooled flow boiling of alumina nanofluids in a horizontal microchannel,” ASME J. Heat Transfer, vol. 132, no. 10, pp. 102404-1–102402-7, 2010. doi:10.1115/1.4001629.
   Web of Science ®Google Scholar
• S. Vafaei and D. Wen, “Flow boiling heat transfer of alumina nanofluids in single microchannels and the roles of nanoparticles,” J. Nanoparticle Res., vol. 13, no. 3, pp. 1063–1073, 2011. doi:10.1007/s11051-010-0095-z.
   Web of Science ®Google Scholar
• Z. Edel and A. Mukherjee, “Flow boiling dynamics of water and nanofluids in a single microchannel at different heat fluxes,” ASME J. Heat Transfer, vol. 137, no. 1, pp. 011501-1–011501-8, 2015. doi:10.1115/1.4028763.
   Web of Science ®Google Scholar
• L. Yu, A. Sur, and D. Liu, “Flow boiling heat transfer and two-phase flow instability of nanofluids in a minichannel,” ASME J. Heat Transfer, vol. 137, no. 5, pp. 051502-1–051502-11, 2015. doi:10.1115/1.4029647.
   Web of Science ®Google Scholar
• H. K. Forster and N. Zuber, “Dynamics of vapor bubbles and boiling heat transfer,” AIChE J., vol. 1, no. 4, pp. 531–535, 1955. doi:10.1002/aic.690010425.
   Web of Science ®Google Scholar
• K. Stephen and M. Abdelsalam, “Heat transfer correlation for natural convection boiling,” Int. J. Heat Mass Transfer, vol. 23, no. 1, pp. 73–87, 1980. doi:10.1016/0017-9310(80)90140-4.
   Web of Science ®Google Scholar
• J. H. Lienhard and V. K. Dhir, “Peak pool boiling heat-flux measurements on finite horizontal flat plates,” ASME J. Heat Transfer, vol. 95, no. 4, pp. 477–482, 1973. doi:10.1115/1.3450092.
   Web of Science ®Google Scholar
• N. Kattan, J. R. Thome, and D. Favrat, “Flow boiling in horizontal tubes: Part 3. heat transfer model based on flow pattern,” ASME J. Heat Transfer, vol. 120, no. 1, pp. 156–165, 1998. doi:10.1115/1.2830039.
   Web of Science ®Google Scholar
• L. Wojtan, R. Revellin, and J. R. Thome, “Investigation of critical heat flux in single, uniformly heated microchannels,” Exp. Therm. Fluid Sci., vol. 30, no. 8, pp. 765–774, 2006. doi:10.1016/j.expthermflusci.2006.03.006.
   Web of Science ®Google Scholar
• L. Cheng, “Flow patterns and bubble growth in microchannels,” in Microchannel Phase Change Transport Phenomena, S. K. Saha, Ed. London: Butterworth-Heinemann, 2016, pp. 91–140.
   Google Scholar
• L. Cheng, “Flow boiling heat transfer with models in microchannel,” in Microchannel Phase Change Transport Phenomena, S. K. Saha, Ed. London: Butterworth-Heinemann, 2016, pp. 141–191.
   Google Scholar
• L. Cheng, G. Ribatski, and J. R. Thome, “Two phase flow patterns and glow pattern maps: fundamentals and applications,” Appl. Mech. Rev., vol. 61, no. 5, pp. 050802-1–050802-28, 2008. doi:10.1115/1.2955990.
   Web of Science ®Google Scholar