Heat Transfer Characteristics and Flow Visualization during Flow Boiling of Acetone in Semi-Open Multi-Microchannels

References

• D. B. Tuckerman and R. F. W. Pease, “High-performance heat sinking for VLSI,” IEEE Electron Device Lett., vol. 2, no. 5, pp. 126–129, 1981. DOI: 10.1109/EDL.1981.25367.
   Web of Science ®Google Scholar
• I. Mudawar, “Assessment of high-heat-flux thermal management schemes,” IEEE Trans. Component Packaging Technol., vol. 24, no. 2, pp. 141–122, 2001. DOI: 10.1109/6144.926375.
   Google Scholar
• S. G. Kandlikar, M. E. Steinke, S. Tian, and L. A. Campbell, “High speed photographic observation of flow boiling of water in parallel minichannels,” ASME National Heat Transfer Conference, Los Angeles, CA, 2001, June, pp. 10–12, paper number:NHTC01-11262, pp.1–10.
   Google Scholar
• M. E. Steinke and S. G. Kandlikar, “An experimental investigation of flow boiling characteristics of water in parallel microchannels,” J. Heat Transfer., vol. 126, no. 4, pp. 518–526, 2004. DOI: 10.1115/1.1778187.
   Web of Science ®Google Scholar
• W. Qu and I. Mudawar, “Measurement and prediction of pressure drop in two-phase micro-channel heat sinks,” Internat. J. Heat Mass Transfer., vol. 46, no. 15, pp. 2737–2753, 2003. DOI: 10.1016/S0017-9310(03)00044-9.
   Web of Science ®Google Scholar
• M. M. Shah, “Unified correlation for heat transfer during boiling in plain mini/micro and conventional channels,” Int. J. Refrig., vol. 74, pp. 606–626, 2017. DOI: 10.1016/j.ijrefrig.2016.11.023.
   Web of Science ®Google Scholar
• H. X. Huang, and J. R. Thome, “Local measurements and a new flow pattern based model for subcooled and saturated flow boiling heat transfer in multi-microchannel evaporators,” Internat. J. Heat Mass Transfer., vol. 103, pp. 701–714, 2016. DOI: 10.1016/j.ijheatmasstransfer.2016.07.074.
   Web of Science ®Google Scholar
• L. Cheng, “Fundamental issues of critical heat flux phenomena during flow boiling in microscale-channels and nucleate pool boiling in confined spaces,” Heat Transfer Eng., vol. 34, no. 13, pp. 1016–1043, 2013. DOI: 10.1080/01457632.2013.763538.
   Web of Science ®Google Scholar
• H. Y. Wu and P. Cheng, “Boiling instability in parallel silicon microchannel sat different heat flux,” Internat. J. Heat Mass Transfer., vol. 47, no. 17–18, pp. 3631–3641, 2004. DOI: 10.1016/j.ijheatmasstransfer.2004.04.012.
   Web of Science ®Google Scholar
• G. Hetsroni, A. Mosyak, E. Pogrebnyak, and Z. Segal, “Explosive boiling of water in parallel micro-channels,” Internat. J. Multiphase Flow., vol. 31, no. 4, pp. 371–392, 2005. DOI: 10.1016/j.ijmultiphaseflow.2005.01.003.
   Web of Science ®Google Scholar
• C. A. Chen, W. R. Chang, K. W. Li, Y. M. Lie, and T. F. Lin, “Subcooled flow boiling heat transfer of R-407 and associated bubble characteristics in narrow annular duct,” Internat. J. Heat Mass Transfer., vol. 52, no. 13–14, pp. 3147–3158, 2009. DOI: 10.1016/j.ijheatmasstransfer.2009.01.027.
   Web of Science ®Google Scholar
• C. B. Zhang, Y. P. Chen, and R. Wu, “Flow boiling in constructal tree-shaped minichannel network,” Int. J. Heat Mass Transfer., vol. 54, no. 1–3, pp. 202–209, 2011. DOI: 10.1016/j.ijheatmasstransfer.2010.09.051.
   Web of Science ®Google Scholar
• Y. P. Chen and P. Cheng, “Heat transfer and pressure drop in fractal tree-like microchannel nets,” Int. J. Heat Mass Transfer., vol. 45, no. 13, pp. 2643–2648, 2002. DOI: 10.1016/S0017-9310(02)00013-3.
   Web of Science ®Google Scholar
• H. Y. Wu and P. Cheng, “Visualization and measurements of periodic boiling in silicon microchannels,” Int. J. Heat Mass Transfer., vol. 46, no. 14, pp. 2603–2614, 2003. DOI: 10.1016/S0017-9310(03)00039-5.
   Web of Science ®Google Scholar
• H. Y. Wu and P. Cheng, “Liquid/two-phase/vapor alternating flow during boiling in microchannels at high heat flux,” Int. Commun. Heat Mass Transfer., vol. 30, no. 3, pp. 295–302, 2003. DOI: 10.1016/S0735-1933(03)00048-4.
   Web of Science ®Google Scholar
• H. L. Wang, H. C. Wu, S. K. Wang, T. C. Hung, and J. Y. Ruey, “A study of mini-channel thermal module design for achieving high stability and high capability in electronic cooling,” Appl. Therm. Eng., vol. 51, no. 1–2, pp. 1144–1153, 2013. DOI: 10.1016/j.applthermaleng.2012.10.007.
   Web of Science ®Google Scholar
• F. Yang et al., “Enhanced flow boiling in microchannels by self-sustained high frequency two-phase oscillations,” Int. J. Heat Mass Transfer., vol. 58, no. 1–2, pp. 402–412, 2013. DOI: 10.1016/j.ijheatmasstransfer.2012.11.057.
   Web of Science ®Google Scholar
• S. G. Kandlikar, W. Theodore, K. Ankit, and M. Valentina, “Enhanced flow boiling over open microchannels with uniform and tapered gap manifolds,” J. Heat Transfer., vol. 135, no. 6, pp. 061401-1–061401-9, 2013. DOI: 10.1115/1.4023574.
   Web of Science ®Google Scholar
• L. Cheng and G. Xia, “Fundamental issues, mechanisms and models of flow boiling heat transfer in microscale channels,” Int. J. Heat Mass Transfer., vol. 108, Part A, pp. 97–127, 2017. DOI: 10.1016/j.ijheatmasstransfer.2016.12.003.
   Web of Science ®Google Scholar
• P. Ma, S. Xia, and Q. Xia, Concise Handbook of Chemical Property Data. Beijing, China: Chemical Industry Press, 2013.
   Google Scholar
• J. R. Taylor, An Introduction to Error Analysis, 2nd ed. Sausalito, California, USA: University Science Books, 1997.
   Google Scholar
• E. Galvis and R. Culham, “Measurements and flow pattern visualizations of two-phase flow boiling in single channel microevaporators,” Int. J. Multiphase Flow., vol. 42, pp. 52–61, 2012. DOI: 10.1016/j.ijmultiphaseflow.2012.01.009.
   Web of Science ®Google Scholar
• Y. Sun, L. Zhang, H. Xu, and X. Zhong, “Flow boiling enhancement of FC-72 from microporous surfaces in minichannels,” Exp. Therm. Fluid Sci., vol. 35, no. 7, pp. 1418–1426, 2011. DOI: 10.1016/j.expthermflusci.2011.05.010.
   Web of Science ®Google Scholar
• M. E. Steinke and S. G. Kandlikar, “An experimental investigation of flow boiling characteristics of water in parallel microchannels,” J. Heat Transfer., vol. 126, no. 4, pp. 518–526, 2004. DOI: 10.1115/1.1778187.
   Web of Science ®Google Scholar
• B. Agostini et al., “High heat flux flow boiling in silicon multi-microchannels – Part I: Heat transfer characteristics of refrigerant R236fa,” Int. J. Heat Mass Transfer., vol. 51, no. 21–22, pp. 5400–5414, 2008. DOI: 10.1016/j.ijheatmasstransfer.2008.03.006.
   Web of Science ®Google Scholar
• B. Agostini et al., “High heat flux flow boiling in silicon multi-microchannels – Part II: Heat transfer characteristics of refrigerant R245fa,” Int. J. Heat Mass Transfer., vol. 51, no. 21–22, pp. 5415–5425, 2008. DOI: 10.1016/j.ijheatmasstransfer.2008.03.007.
   Web of Science ®Google Scholar
• B. Sumith, F. Kaminaga, and K. Matsumura, “Saturated flow boiling of water in a vertical small diameter tube,” Exp. Therm. Fluid Sci., vol. 27, no. 7, pp. 789–801, 2003. DOI: 10.1016/S0894-1777(02)00317-5.
   Web of Science ®Google Scholar
• S. In and S. Jeong, “Flow boiling heat transfer characteristics of R123 and R134a in a micro-channel,” Int. J. Multiphase Flow., vol. 35, no. 11, pp. 987–1000, 2009. DOI: 10.1016/j.ijmultiphaseflow.2009.07.003.
   Web of Science ®Google Scholar
• J. L. Xu, S. Shen, Y. H. Gan, W. Zhang, and Q. C. Su, “Transient flow pattern based microscale boiling heat transfer mechanisms,” J. Micromech. Microeng., vol. 15, no. 6, pp. 1344–1361, 2005. DOI: 10.1088/0960-1317/15/6/028.
   Web of Science ®Google Scholar
• Z. Y. Bao, D. F. Fletcher, and B. S. Haynes, “Flow boiling heat transfer of freon R11 and HCFC123 in narrow passages,” Int. J. Heat Mass Transfer., vol. 43, no. 18, pp. 3347–3358, 2000. DOI: 10.1016/S0017-9310(99)00379-8.
   Web of Science ®Google Scholar
• K. Balasubramanian, P. S. Lee, C. J. Teo, and S. K. Chou, “Flow boiling heat transfer and pressure drop in stepped fin microchannels,” Int. J. Heat Mass Transfer., vol. 67, pp. 234–252, 2013. DOI: 10.1016/j.ijheatmasstransfer.2013.08.023.
   Web of Science ®Google Scholar
• L. Cheng, G. Ribatski, and J. R. Thome, “Two phase flow patterns and glow pattern maps: Fundamentals and applications,” Appl. Mech. Rev., vol. 61, no. 5, pp. 050802-1– 050802-28, 2008. DOI: 10.1115/1.2955990.
   Web of Science ®Google Scholar
• A. Kalani and S. G. Kandlikar, “Flow patterns and heat transfer mechanisms during flow boiling over open microchannels in tapered manifold (OMM),” Int. J. Heat Mass Transfer., vol. 89, pp. 494–504, 2015. DOI: 10.1016/j.ijheatmasstransfer.2015.05.070.
   Web of Science ®Google Scholar
• D. Deng et al., “Effects of heat flux, mass flux and channel size on flow boiling performance of reentrant porous microchannels,” Exp. Therm. Fluid Sci., vol. 64, pp. 13–22, 2015. DOI: 10.1016/j.expthermflusci.2015.01.015.
   Web of Science ®Google Scholar