Advanced search
Publication Cover
Heat Transfer Engineering Volume 40, 2019 - Issue 19
Submit an article Journal homepage
164
Views
2
CrossRef citations to date
0
Altmetric
Articles

Approximate Solution to the Spray Heat Transfer Problem at High Surface Temperatures and Liquid Mass Fluxes

Tae-Woo LeeDepartment of Mechanical and Aerospace Engineering, School of Engineering for Matter, Transport and Energy, Arizona State University, Tempe, AZ, USACorrespondence[email protected]
View further author information
,
Milan HnizdilLaboratory of Heat Transfer and Fluid Flow, Brno University of Science and Technology, Brno, Czech RepublicView further author information
,
Martin ChabicovskyLaboratory of Heat Transfer and Fluid Flow, Brno University of Science and Technology, Brno, Czech RepublicView further author information
&
Miroslav RaudenskyLaboratory of Heat Transfer and Fluid Flow, Brno University of Science and Technology, Brno, Czech RepublicView further author information
Pages 1649-1655 | Published online: 29 Jun 2018

References

  • J. Wendelstorf, K.-H. Spitzer, R. Wendelstorf, "Spray water cooling heat transfer at high temperatures and liquid mass fluxes," Int. J. of Heat Mass Transfer, Vol. 51, No. 19–20, pp. 4902–4910, 2008. doi:10.1016/j.ijheatmasstransfer.2008.01.032.
  • W. P. Klinzing, J. C. Rozzi, and I. Mudawar, "Film and transition boiling correlations for quenching of hot surfaces with water sprays," J. of Heat Treating, Vol. 9, No. 2, pp. 91–103, 1992. doi:10.1007/BF02833145.
  • J. Kim, "Spray cooling heat transfer: The state of the art," Int. J. of Heat Fluid Flow, Vol. 28, No. 4, pp. 753–767, 2007. doi:10.1016/j.ijheatfluidflow.2006.09.003.
  • A. A. Tseng, M. Raudensky, and T.-W. Lee, "Liquid Sprays for Heat Transfer Enhancements: A Review," Heat Transfer Eng, Vol. 37, No. 16, pp. 1401–1417, 2016. doi:10.1080/01457632.2015.1136168.
  • J. D. Bernardin, and I. Mudawar, "The Leidenfrost point: Experimental study and assessment of existing models," J. of Heat Transfer, Vol. 121, No. 4, pp. 894–903, 1999. doi:10.1115/1.2826080.
  • J. D. Bernardin, and I. Mudawar, "Film boiling heat transfer of droplet streams and sprays," Int. J. of Heat Mass Transfer, Vol. 40, No. 11, pp. 2579–2593, 1997. doi:10.1016/S0017-9310(96)00297-9.
  • M. Raudensky, and J. Horsky, "Secondary cooling in continuous casting and Leidenfrost temperature effects," Ironmaking Steelmaking, Vol. 32, No. 2, pp. 159–164, 2005. doi:10.1179/174328105X15913.
  • J. Sengupta, B. G. Thomas, and M. A. Wells, "The use of water cooling during the continuous casting of steel and aluminum alloys," Metall. Mat. Trans. A, Vol. 36, No. 1, pp 187–204, 2005. doi:10.1007/s11661-005-0151-y.
  • K. Choi, and S. Yao, "Mechanisms of film boiling heat transfer of normally impacting spray," Int. J. Heat and Mass Transfer, Vol. 30, No. 2, pp. 311–318, 1987. doi:10.1016/0017-9310(87)90119-0.
  • M. Ciofalo, I. Piazza, and V. Brucato, "Investigation of the cooling of hot walls by liquid water sprays," Int. J. Heat Mass Transfer, Vol. 42, No. 7, pp. 1157–1175, 1999. doi:10.1016/S0017-9310(98)00250-6.
  • E. Kulic, E. Rhodes, and G. Sullivan, "Heat transfer rate predictions in condensation on droplets from air-steam mixture,” Can. J. of Chem. Eng, Vol. 53, No. 3, pp. 252–258, 1975. doi:10.1002/cjce.5450530302.
  • J. N. Chung, and P. S. Ayyaswamy, "The Effect of internal circulation on the heat transfer of a nuclear reactor containment spray droplet," Nucl. Tech, Vol. 35, No. 3, pp. 603–610, 1977. doi:10.13182/NT77-A31869.
  • M. Tanaka, "Heat transfer of a spray droplet in a nuclear reactor containment," Nucl. Tech, Vol. 47, No. 2, pp. 268–281, 1980. doi:10.13182/NT80-A32432.
  • P. Dunand, G. Castanet, M. Gradeck, F. Lemoine, and D. Maillet, "Heat transfer of droplets impinging onto a wall above the Leidentfrost temperature," C. R. Mechanique, Michel, Vol. 341, No. 1–2, pp. 75–87, 2013. doi:10.1016/j.crme.2012.11.006.
  • F. Gori, and L. Bossi, “Optimal slot height in the jet cooling of a circular cylinder," Appl. Therm. Eng, Vol. 23, Np. 7, pp. 859–870, 2003. doi:10.1016/S1359-4311(03)00025-5.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.