Uniform Cooling of a Flat Surface by an Optimized Array of Turbulent Impinging Air Jets

References

• A. Sengupta and P. P. Sarkar, "Experimental measurement and numerical simulation of an impinging jet with application to thunderstorm microburst winds," J. Wind Eng. Ind. Aerodyn., vol. 96, no. 3, pp. 345–365, 2008.
   Web of Science ®Google Scholar
• A. Sarkar, N. Nitin, M. Karwe, and R. Singh, "Fluid flow and heat transfer in air jet impingement in food processing," J. Food Sci., vol. 69, no. 4, pp. CRH113–CRH122, 2004.
   Web of Science ®Google Scholar
• A. Pavlova and M. Amitay, "Electronic cooling using synthetic jet impingement," J. Heat Transf., vol. 128, no. 9, pp. 897–907, 2006.
   Web of Science ®Google Scholar
• S. Narumanchi, A. Troshko, D. Bharathan, and V. Hassani, "Numerical simulations of nucleate boiling in impinging jets: Applications in power electronics cooling," Int. J. Heat Mass Transf., vol. 51, no. 1, pp. 1–12, 2008.
   Web of Science ®Google Scholar
• S. G. Kandlikar and A. V. Bapat, "Evaluation of jet impingement, spray and microchannel chip cooling options for high heat flux removal," Heat Transf. Eng., vol. 28, no. 11, pp. 911–923, 2007.
   Web of Science ®Google Scholar
• B. Han and R. Goldstein, "Jet‐impingement heat transfer in gas turbine systems," Ann. N Y Acad. Sci., vol. 934, no. 1, pp. 147–161, 2001.
   PubMed Web of Science ®Google Scholar
• M. Belusko, W. Saman, and F. Bruno, "Performance of jet impingement in unglazed air collectors," Sol Energy, vol. 82, no. 5, pp. 389–398, 2008.
   Web of Science ®Google Scholar
• M. Forouzanmehr, H. Shariatmadar, F. Kowsary, and M. Ashjaee, "Achieving heat flux uniformity using an optimal arrangement of impinging jet arrays," J. Heat Transf., vol. 137, no. 6, p. 061002 (8 pages), 2015.
   Web of Science ®Google Scholar
• S. Polat, B. Huang, A. S. Mujumdar, and W. Douglas, "Numerical flow and heat transfer under impinging jets: a review," Annu. Rev. Heat Transf., vol. 2, no. 2, pp. 157–197, 1989.
   Google Scholar
• R. Gardon and J. C. Akfirat, "The role of turbulence in determining the heat-transfer characteristics of impinging jets," Int. J. Heat Mass Transf., vol. 8, no. 10, pp. 1261–1272, 1965.
   Google Scholar
• M. Behnia, S. Parneix, Y. Shabany, and P. Durbin, "Numerical study of turbulent heat transfer in confined and unconfined impinging jets," Int. J. Heat Fluid Flow, vol. 20, no. 1, pp. 1–9, 1999.
   Web of Science ®Google Scholar
• Y. Shi, M. Ray, and A. Mujumdar, "Computational study of impingement heat transfer under a turbulent slot jet," Ind. Eng. Chem. Res., vol. 41, no. 18, pp. 4643–4651, 2002.
   Web of Science ®Google Scholar
• M. Modak, K. Garg, S. Srinivasan, and S. K. Sahu, "Theoretical and experimental study on heat transfer characteristics of normally impinging two dimensional jets on a hot surface," Int. J. Thermal Sci., vol. 112, pp. 174–187, 2017.
   Web of Science ®Google Scholar
• J. Mohammadpour, M. M. Zolfagharian, A. S. Mujumdar, M. R. Zargarabadi, and M. Abdulahzadeh, "Heat transfer under composite arrangement of pulsed and steady turbulent submerged multiple jets impinging on a flat surface," Int. J. Therm Sci., vol. 86, pp. 139–147, 2014.
   Web of Science ®Google Scholar
• R. Leena, R. V. Renjith, and M. J. Prakash, "Experimental and numerical investigations on steady and unsteady jet impingement cooling for high-power electronics," IEEE Trans. Comp. Pack Manufact. Technol., vol. 5, no. 5, pp. 636–640, 2015.
   Web of Science ®Google Scholar
• P. A. K. Lam and K. A. Prakash, "A numerical investigation and design optimization of impingement cooling system with an array of air jets," Int. J. Heat Mass Transf., vol. 108, pp. 880–900, 2017.
   Web of Science ®Google Scholar
• Z. Chi, H. Liu, and S. Zang, "Geometrical optimization of nonuniform impingement cooling structure with variable-diameter jet holes," Int. J. Heat Mass Transf., vol. 108, pp. 549–560, 2017.
   Web of Science ®Google Scholar
• H. Molavi, I. Pourshaban, A. Hakkaki-Fard, M. Molavi, A. Ayasoufi, and R. K. Rahmani, "Inverse identification of thermal properties of charring ablators," Numer. Heat Transf. B Fund., vol. 56, no. 6, pp. 478–501, 2010.
   Web of Science ®Google Scholar
• S. Veiseh, A. Hakkaki-Fard, and F. Kowsary, "Determination of the air/fiber conductivity of mineral wool insulations in building applications using nonlinear estimation methods," J. Build. Phys., vol. 32, no. 3, pp. 243–260, 2009.
   Web of Science ®Google Scholar
• A. A. Khan, S.-M. Kim, and K.-Y. Kim, "Multi-objective optimization of an inverse trapezoidal-shaped microchannel," Heat Transf. Eng., vol. 37, no. 6, pp. 571–580, 2016.
   Web of Science ®Google Scholar
• S. R. Reddy, A. Abdoli, G. S. Dulikravich, C. C. Pacheco, G. Vasquez, R. Jha, et al., "Multi-objective optimization of micro pin-fin arrays for cooling of high heat flux electronics with a hot spot," Heat Transf. Eng., vol. 38, no. 14–15, pp. 1235–1246, 2017.
   Web of Science ®Google Scholar
• A. A. Shokouhi, S. Payan, A. Shokouhi, and S. M. H. Sarvari, "Inverse boundary design problem of turbulent forced convection between parallel plates with surface radiation exchange," Heat Transf. Eng., vol. 36, no. 5, pp. 488–497, 2015.
   Web of Science ®Google Scholar
• Y. Shi, M. Ray, and A. Mujumdar, "Effect of large temperature differences on local Nusselt number under turbulent slot impingement jet," Dry. Technol., vol. 20, no. 9, pp. 1803–1825, 2002.
   Web of Science ®Google Scholar
• J. R. Welty, C. E. Wicks, G. Rorrer, and R. E. Wilson, Fundamentals of Momentum, Heat, and Mass Transfer. New York, NY: John Wiley & Sons, 2009.
   Google Scholar
• M. Sharif and K. Mothe, "Evaluation of turbulence models in the prediction of heat transfer due to slot jet impingement on plane and concave surfaces," Numer. Heat Transfer B Fund., vol. 55, no. 4, pp. 273–294, 2009.
   Web of Science ®Google Scholar
• B. E. Launder and D. B. Spalding, Mathematical Models of Turbulence. London, UK: Academic Press, 1972.
   Google Scholar
• R. Dutta, A. Dewan, and B. Srinivasan, "Comparison of various integration to wall (ITW) RANS models for predicting turbulent slot jet impingement heat transfer," Int. J. Heat Mass Transf., vol. 65, pp. 750–764, 2013.
   Web of Science ®Google Scholar
• M. Wolfshtein, "The velocity and temperature distribution in one-dimensional flow with turbulence augmentation and pressure gradient," Int. J. Heat Mass Transf., vol. 12, no. 3, pp. 301–318, 1969.
   Web of Science ®Google Scholar
• S. Patankar, Numerical Heat Transfer and Fluid Flow. New York, NY: McGraw Hill, 1980.
   Google Scholar
• E. Mladin and D. Zumbrunnen, "Local convective heat transfer to submerged pulsating jets," Int. J. Heat Mass Transf., vol. 40, no. 14, pp. 3305–3321, 1997.
   Web of Science ®Google Scholar
• R. Hooke and T. A. Jeeves, "Direct search' solution of numerical and statistical problems," J. ACM, vol. 8, no. 2, pp. 212–229, 1961.
   Google Scholar