Heat transfer augmentation of internal flow using twisted tape insert in turbulent flow

References

• M. K. Jensen, “An evaluation of the effect of twisted-tape swirl generators in two-phase flow heat exchangers,” Heat Transf. Eng., vol. 6, no. 4, pp. 19–30, 1985. DOI: 10.1080/01457638508939635.
   Google Scholar
• V. D. Zimparov and P. L. Penchev, “Performance evaluation of some tube inserts as heat transfer enhancement techniques,” Heat Transf. Eng., vol. 27, no. 8, pp. 39–46, Sep. 2006. DOI: 10.1080/01457630600793988.
   Web of Science ®Google Scholar
• A. T. Wijayanta, T. Istanto, K. Kariya, and A. Miyara, “Heat transfer enhancement of internal flow by inserting punched delta winglet vortex generators with various attack angles,” Exp. Therm. Fluid Sci., vol. 87, pp. 141–148, Oct. 2017. DOI: 10.1016/j.expthermflusci.2017.05.002.
   Web of Science ®Google Scholar
• A. T. Wijayanta, I. Yaningsih, M. Aziz, T. Miyazaki, and S. Koyama, “Double-sided delta-wing tape inserts to enhance convective heat transfer and fluid flow characteristics of a double-pipe heat exchanger,” Appl. Therm. Eng., vol. 145, pp. 27–37, Dec. 2018. DOI: 10.1016/j.applthermaleng.2018.09.009.
   Web of Science ®Google Scholar
• H. Honda, A. T. Wijayanta, and N. Takata, “Condensation of R407C in a horizontal microfin tube,” Int. J. Refrig., vol. 28, no. 2, pp. 203–211, Mar. 2005. DOI: 10.1016/j.ijrefrig.2004.07.020.
   Web of Science ®Google Scholar
• O. T. Oni, “Numerical investigation of heat transfer and fluid flow in tubes induced with twisted tape inserts,” Ph.D. dissertation, Sch. Eng., University of Glasgow, UK, 2015.
   Google Scholar
• A. Kumar, S. Singh, S. Chamoli, and M. Kumar, “Experimental investigation on thermo-hydraulic performance of heat exchanger tube with solid and perforated circular disk along with twisted tape insert,” Heat Transf. Eng., vol. 40, no. 7, pp. 616–626, 2019. DOI: 10.1080/01457632.2018.1436618.
   Web of Science ®Google Scholar
• J. M. Whitham, “The effects of retarders in fire tubes of steam boilers,” Nav. Eng. J., vol. 8, no. 4, pp. 779–781, Nov. 1896. DOI: 10.1111/j.1559-3584.1896.tb00751.x.
   Google Scholar
• A. W. Date, “Prediction of fully-developed flow in a tube containing a twisted-tape,” Int. J. Heat Mass Transf., vol. 17, no. 8, pp. 845–859, Aug. 1974. DOI: 10.1016/0017-9310(74)90152-5.
   Web of Science ®Google Scholar
• R. J. Yadav and A. S. Padalkar, “CFD analysis for heat transfer enhancement inside a circular tube with half-length upstream and half-length downstream twisted tape,” J. Thermodynam., vol. 2012, pp. 1–12, Article ID 580593, Oct. 2012. DOI: 10.1155/2012/580593.
   Google Scholar
• B. V. Dzyubenko and R. I. Yakimenko, “Efficiency of heat transfer surfaces using the method of effective parameters,” Heat Transf. Res., vol. 32, no. 7–8, pp. 447–454, 2001. DOI: 10.1615/HeatTransRes.v32.i7-8.150.
   Google Scholar
• L. A. Asmantas, M. A. Nemira, and V. V. Trilikauskas, “Coefficients of heat transfer and hydraulic drag of twisted oval tube,” Heat Transf.-Sov. Res., vol. 17, pp. 103–109, Jul. 1985.
   Google Scholar
• J. A. Meng, X. G. Liang, Z. J. Chen, and Z. X. Li, “Experimental study on convective heat transfer in alternating elliptical axis tubes,” Exp. Therm. Fluid Sci., vol. 29, no. 4, pp. 457–465, Apr. 2005. DOI: 10.1016/j.expthermflusci.2004.04.006.
   Web of Science ®Google Scholar
• S. V. Patil and P. V. V. Babu, “Heat transfer and pressure drop studies through a square duct fitted with increasing and decreasing order of twisted tape,” Heat Transf. Eng., vol. 35, no. 14–15, pp. 1380–1387, Jan. 2014. DOI: 10.1080/01457632.2013.877318.
   Web of Science ®Google Scholar
• S. K. Saha, U. N. Gaitonde, and A. W. Date, “Heat transfer and pressure drop characteristics of laminar flow in a circular tube fitted with regularly spaced twisted-tape elements,” Exp. Therm. Fluid Sci., vol. 2, no. 3, pp. 310–322, Jul. 1989. DOI: 10.1016/0894-1777(89)90020-4.
   Web of Science ®Google Scholar
• S. Eiamsa-Ard, K. Whongcharee, and S. Sripattanapipat, “3-D numerical simulation of swirling flow and convective heat transfer in a circular tube induced by means of loose-fit twisted tapes,” Int. Commun. Heat Mass Transf., vol. 36, no. 9, pp. 947–955, Nov. 2009. DOI: 10.1016/j.icheatmasstransfer.2009.06.014.
   Web of Science ®Google Scholar
• M. Rahimi, S. R. Shabanian, and A. A. Alsairafi, “Experimental and CFD studies on heat transfer and friction factor characteristics of a tube equipped with modified twisted tape inserts,” Chem. Eng. Process., vol. 48, no. 3, pp. 762–770, Mar. 2009. DOI: 10.1016/j.cep.2008.09.007.
   Web of Science ®Google Scholar
• S. Jaisankar, T. K. Radhakrishnan, and K. N. Sheeba, “Experimental studies on heat transfer and friction factor characteristics of thermosyphon solar water heater system fitted with spacer at the trailing edge of twisted tapes,” J. Appl. Therm. Eng., vol. 29, no. 5–6, pp. 1224–1231, 2009. DOI: 10.1016/j.applthermaleng.2008.06.009.
   Web of Science ®Google Scholar
• A. H. Algifri and R. K. Bhardwaj, “Prediction of the heat transfer for decaying turbulent swirl flow in a tube,” Int. J. Heat Mass Transf., vol. 28, no. 9, pp. 1637–1643, Apr. 1985. DOI: 10.1016/0017-9310(85)90138-3.
   Web of Science ®Google Scholar
• A. Klaczak, “Heat transfer and pressure drop in tubes with short turbulators,” Heat Mass Transf., vol. 31, no. 6, pp. 399–401, Aug. 1996. DOI: 10.1007/BF02172586.
   Web of Science ®Google Scholar
• K. V. Sharma, L. S. Sundar, and P. K. Sarma, “Estimation of heat transfer coefficient and friction factor in the transition flow with low volume concentration of Al2O3 nanofluid flowing in a circular tube and with twisted tape insert,” Int. Commun. Heat Mass Transf., vol. 36, no. 5, pp. 503–507, May 2009. DOI: 10.1016/j.icheatmasstransfer.2009.02.011.
   Web of Science ®Google Scholar
• P. Bharadwaj, A. D. Khondge, and A. W. Date, “Heat transfer and pressure drop in a spirally grooved tube with twisted tape insert,” Int. J. Heat Mass Transf., vol. 52, no. 7–8, pp. 1938–1944, Mar. 2009. DOI: 10.1016/j.ijheatmasstransfer.2008.08.038.
   Web of Science ®Google Scholar
• M. A. Akhavan-Behabadi, R. Kumar, A. Mohammadpour, and M. Jamali-Asthiani, “Effect of twisted tape insert on heat transfer and pressure drop in horizontal evaporators for the flow of R-134a,” Int. J. Refrig., vol. 32, no. 5, pp. 922–930, Aug. 2009. DOI: 10.1016/j.ijrefrig.2008.11.004.
   Web of Science ®Google Scholar
• I. Yaningsih and A. T. Wijayanta, “Concentric tube heat exchanger installed by twisted tapes using various wings with alternate axes,” presented at Int. Conf. Eng. Sci. Nanotechnol. 2016, Solo, Indonesia, Aug. 3–5, 2016. DOI: 10.1063/1.4968258.
   Google Scholar
• I. Yaningsih, A. T. Wijayanta, T. Miyazaki, and S. Koyama, “V-cut twisted tape insert effect on heat transfer enhancement of single phase turbulent flow heat exchanger,” presented at the 3rd Int. Conf. Ind. Mech. Elect. Chem. Eng., Surakarta, Indonesia, Sep. 13–14, 2017. DOI: 1.5024097.
   Google Scholar
• H. K. Versteeg and W. Malalasekera, An Introduction to Computational Fluid Dynamics - The Finite Volume Method. Harlow: Prentice Hall, 2007.
   Google Scholar
• V. Yakhot and S. A. Orszag, “Renormalization group analysis of turbulence I: Basic theory,” J. Sci. Comput., vol. 1, no. 1, pp. 3–51, Mar. 1986. DOI: 10.1007/BF01061452.
   Google Scholar
• ANSYS Fluent 15.0: Theory Guide. Canonsburg, PA: Fluent Inc., 2010.
   Google Scholar
• Y. A. Cengel and A. J. Ghajar, Heat and Mass Transfer: Fundamentals and Applications, 6th ed. New York: McGraw-Hill Education, 2020.
   Google Scholar
• F. M. White, Fluid Mechanics, 7th ed. New York: McGraw-Hill, 2011.
   Google Scholar
• S. Eiamsa-Ard and P. Seemawute, “Decaying swirl flow in round tubes with short-length twisted tapes insert,” Int. Commun. Heat Mass Transf., vol. 39, no. 5, pp. 649–656, 2012. DOI: 10.1016/j.icheatmasstransfer.2012.03.021.
   Web of Science ®Google Scholar
• B. R. Munson, T. H. Okiishi, and W. W. Huebsch, Fundamentals of Fluid Mechanics. Hoboken, NJ: Wiley, 2009.
   Google Scholar
• Q. Liao and M. D. Xin, “Augmentation of convective heat transfer inside tubes with three-dimensional internal extended surfaces and twisted-tape inserts,” Chem. Eng. J., vol. 78, no. 2–3, pp. 95–105, Aug. 2000. DOI: 10.1016/S1385-8947(00)00134-0.
   Web of Science ®Google Scholar
• P. R. Lang and F. S. Lombargo, Atmospheric Turbulence, Meteorological Modeling, and Aerodynamics. New York, NY: Nova Science, 2010.
   Google Scholar
• S. Eiamsa-Ard, P. Seemawute, and K. Wongcharee, “Influences of peripherally-cut twisted tape insert on heat transfer and thermal performance characteristics in laminar and turbulent tube flows,” Exp. Therm. Fluid Sci., vol. 34, no. 6, pp. 711–719, Sep. 2010. DOI: 10.1016/j.expthermflusci.2009.12.013.
   Web of Science ®Google Scholar
• J. P. Holman, Heat Transfer, 10th ed. New York: McGraw-Hill, 2009.
   Google Scholar
• J. Guo, A. Fan, X. Zhang, and W. A. Liu, “Numerical study on heat transfer and friction factor characteristics of laminar flow in a circular tube fitted with center-cleared twisted-tape,” Int. J. Therm. Sci., vol. 50, no. 7, pp. 1263–1270, Jul. 2011. DOI: 10.1016/j.ijthermalsci.2011.02.010.
   Web of Science ®Google Scholar