A Numerical Analysis of Convection Heat Transfer and Friction Factor for Oscillating Corrugated Channel Flows

References

• P. Oclon, S. Lopata, M. Nowak, and A. C. Benim, “Numerical study on the effect of inner tube fouling on the thermal performance of high temperature fin-and-tube heat exchanger,” Prog. Comp. Fluid Dyn., vol. 15, no. 5, pp. 290–306, 2015. DOI: 10.1504/PCFD.2015.072014.
   Web of Science ®Google Scholar
• D. G. Ebling et al., “Development of a system for thermoelectric heat recovery from stationary industrial processes,” J. Electron. Mater., vol. 45, no. 7, pp. 3433–3439, 2016. DOI: 10.1007/s11664-016-4511-8.
   Web of Science ®Google Scholar
• A. Jokar, S. J. Eckels, and M. H. Hosni, “Single-phase flow in meso-channel compact heat exchangers for air conditioning applications,” Heat Trans. Eng., vol. 31, no. 1, pp. 3–16, 2010. DOI: 10.1080/01457630903263200.
   Web of Science ®Google Scholar
• A. M. Maqableh, A. F. Khadrawi, M. A. Al-Nimr, S. A. Ammourah, and A. C. Benim, “Heat transfer characteristics of parallel and counter flow micro-channel heat exchangers with varying wall resistance,” Prog. Comput. Fluid Dyn., vol. 11, no. 5, pp. 318–328, 2011. DOI: 10.1504/PCFD.2011.042183.
   Web of Science ®Google Scholar
• A. C. Benim, H. Chattopadhyay, and A. Nahavandi, “Computational analysis of turbulent forced convection in a channel with a triangular prism,” Int. J. Therm. Sci., vol. 50, no. 10, pp. 1973–1983, 2011. DOI: 10.1016/j.ijthermalsci.2011.05.002.
   Web of Science ®Google Scholar
• I. Taymaz, E. Aslan, and A. C. Benim, “Numerical investigation of incompressible fluid flow and heat transfer across a bluff body in a channel flow,” Therm. Sci., vol. 19, no. 2, pp. 537–547, 2015. DOI: 10.2298/TSCI120220145T.
   Web of Science ®Google Scholar
• S. Bhattacharyya, H. Chattopadhyay, and A. C. Benim, “Simulation of heat transfer enhancement in tube flow with twisted tape insert,” Prog. Comput. Fluid Dyn., vol. 17, no. 3, pp. 193–197, 2017. DOI: 10.1504/PCFD.2017.084356.
   Web of Science ®Google Scholar
• H. Chattopadhyay and A. C. Benim, “Turbulent heat transfer over a moving surface due to impinging slot jets,” J. Heat Transf. Trans. ASME, vol. 133, no. 10, p. 5, 2011. DOI: 10.1115/1.4004075.
   Web of Science ®Google Scholar
• S. D. Farahani and F. Kowsary, “Heat transfer from pulsating laminar impingement slot jet on a flat surface with inlet velocity: sinusoidal and square wave,” Heat Trans. Eng., vol. 39, no. 10, pp. 901–913, 2018. DOI: 10.1080/01457632.2017.1338868.
   Web of Science ®Google Scholar
• A. C. Benim, “A finite element solution of radiative heat transfer in participating media utilizing the moment method,” Comput. Methods Appl. Mech. Eng., vol. 67, no. 1, pp. 1–14, 1988. DOI: 10.1016/0045-7825(88)90065-5.
   Web of Science ®Google Scholar
• E. M. Sparrow and L. M. Hossfeld, “Effect of rounding of protruding edges on heat transfer and pressure drop in a duct,” Int. J. Heat Mass Transf., vol. 27, no. 10, pp. 1715–1723, 1984. DOI: 10.1016/0017-9310(84)90154-6.
   Web of Science ®Google Scholar
• B. Synder, K. T. Li, and R. A. Wirtz, “Heat transfer enhancement in a serpentine channel,” J. Heat Mass Transf., vol. 36, no. 12, pp. 2965–2976, 1993. DOI: 10.1016/0017-9310(93)90026-3.
   Web of Science ®Google Scholar
• K. Bilen, M. Cetin, H. Gul, and T. Balta, “The investigation of groove geometry effect on heat transfer for internally grooved tubes,” Appl. Therm. Eng., vol. 29, no. 4, pp. 753–761, 2009. DOI: 10.1016/j.applthermaleng.2008.04.008.
   Web of Science ®Google Scholar
• K. Nilpueng and S. Wongwises, “Flow pattern and pressure drop of vertical upward gas liquid flow in sinusodial wavy channels,” Exp. Therm. Fluid Sci., vol. 15, no. 6, pp. 290–306, 2006. DOI: 10.1016/j.expthermflusci.2005.10.004.
   Web of Science ®Google Scholar
• M. Ciofalo, J. Stasiek, and M. W. Collins, “Flow and heat transfer in corrugated passages: Direct and large eddy simulation and comparison with experimental results,” Proceedings Second International Symposium on Engineering Turbulence Modelling and Measurements, Florence, Italy, May 31–Jan 2, 1993, pp. 283–292.
   Google Scholar
• M. Mirzaei, A. Sohankar, L. Davidson, and F. Innings, “Large eddy simulation of the flow and heat transfer in a half-corrugated channel with various wave amplitudes,” Int. J. Heat Mass Transf., vol. 76, pp. 432–446, 2014. DOI: 10.1016/j.ijheatmasstransfer.2014.04.018.
   Web of Science ®Google Scholar
• S. Ray, B. Unsal, and F. Durst, “Development length of sinusodially pulsating laminar pipe flows in moderate and high Reynolds number regimes,” Int. J. Heat Fluid Flow, vol. 37, pp. 167–176, Oct. 2012. DOI: 10.1016/j.ijheatfluidflow.2012.06.001.
   Web of Science ®Google Scholar
• C. Aygun and O. Aydin, “Hydrodynamics of piston-driven laminar pulsating flow: part 1. developing flow,” Nucl. Eng. Design, vol. 274, pp. 164–171, Jul. 2014. DOI: 10.1016/j.nucengdes.2014.02.017.
   Web of Science ®Google Scholar
• C. Aygun and O. Aydin, “Hydrodynamics of piston-driven laminar pulsating flow: part 2. fully developed flow,” Nucl. Eng. Design, vol. 274, pp. 172–180, Jul. 2014. DOI: 10.1016/j.nucengdes.2014.02.018.
   Web of Science ®Google Scholar
• H. Chattopadhyay, F. Durst, and S. Ray, “Analysis of heat transfer in simultaneously developing pulsating laminar flow in a pipe with constant wall temperature,” Int. Commun. Heat Mass Transf., vol. 33, no. 4, pp. 475–481, 2006. DOI: 10.1016/j.icheatmasstransfer.2005.12.008.
   Web of Science ®Google Scholar
• A. C. Benim, M. Cagan, and D. Gunes, “Computational analysis of transient heat transfer in turbulent pipe flow,” Int. J. Therm. Sci., vol. 43, no. 8, pp. 725–732, 2004. DOI: 10.1016/j.ijthermalsci.2004.02.012.
   Web of Science ®Google Scholar
• D. A. Nield and A. V. Kuznetsov, “Forced convection with laminar pulsating flow in a channel or tube,” Int. J. Therm. Sci., vol. 46, no. 6, pp. 551–560, 2007. DOI: 10.1016/j.ilthermalsci.2006.07.011.
   Web of Science ®Google Scholar
• C. Y. Tseng, K. S. Yang, K. H. Chien, M. S. Jeng, and C. C. Wang, “Investigation of the performance of pulsating heat pipe subject to uniform/alternating tube diameters,” Exp. Therm. Fluid Sci., vol. 54, pp. 85–92, Apr. 2014.DOI: 10.1016/j.expthermflusci.2014.01.019.
   Web of Science ®Google Scholar
• B. Metha and S. Khandekar, “Local experimental heat transfer of single-phase pulsating laminar flow in a square mini-channel,” Int. J. Therm. Sci., vol. 91, pp. 157–166, May 2015. DOI: 10.1016/j.,jthermalsci.2015.01.008.
   Web of Science ®Google Scholar
• J. Y. Yu, W. Lin, and X. T. Zheng, “Effect on the flow and heat transfer characteristics for sinusodial pulsating laminar flow in a heated square cylinder,” Heat Mass Transf., vol. 50, no. 6, pp. 849–864, 2014. DOI: 10.1007/s00231-014-1294-4.
   Web of Science ®Google Scholar
• M. Jafari, M. Farhadi, and K. Sedighi, “Pulsating flow effects on convection heat transfer in a corrugated channel: A LBM approach,” Int. Commun. Heat Mass Transf., vol. 45, pp. 146–154, Jul. 2013. DOI: 10.1016/j.icheatmasstransfer.2013.04.006.
   Web of Science ®Google Scholar
• A. Assmann et al., “Pulsatile extracorporeal circulation during on-pump cardiac surgery enhances aortic wall shear stress,” J. Biomech., vol. 45, no. 1, pp. 156–163, 2012. DOI: 10.1016/j.jbiomech.2011.09.021.
   PubMed Web of Science ®Google Scholar
• E. Aslan, I. Taymaz, and Y. Islamoglu, “Finite volume simulation for convective heat transfer in wavy channels,” Heat Mass Transf., vol. 52, no. 3, pp. 483–497, 2016. DOI: 10.1007/s00231-015-1571-x.
   Web of Science ®Google Scholar
• E. Aslan et al., “Computational investigation of the velocity and temperature fields in corrugated heat exchanger channels using RANS based turbulence models with experimental validation,” Prog. Comput. Fluid Dyn., Vol. 18, no. 1, pp. 33–45, 2018. DOI: 10.1504/PCFD.2018.089526.
   Web of Science ®Google Scholar
• Ansys-Fluent, version 14.5. Canonsburg, PA, USA: Ansys Inc., 2012.
   Google Scholar
• F. R. Menter, “Two-equation eddy-viscosity turbulence models for engineering applications,” AIAA J., vol. 32, no. 8, pp. 1598–1605, 1994.
   Web of Science ®Google Scholar
• P. A. Durbin and B. A. P. Reif, Statiscal Theory and Modelling for Turbulent Flows, 2nd ed., Chichester, UK: Wiley, 2011.
   Google Scholar
• S. W. Chang, L. M. Su, T. L. Yang, and S. F. Chiou, “Enhanced heat transfer of shaker bored piston cooling channel with twisted tape insert,” Heat Transf. Eng., vol. 28, no. 4, pp. 321–334, 2007.
   Web of Science ®Google Scholar
• S. J. Kline and F. A. McClintock, “Describing uncertainties in single-sample experiments,” Mech. Eng., vol. 75, no. 1, pp. 3–8, 1953.
   Google Scholar
• D. C. Wilcox, Turbulence Modelling for CFD. La Canada, CA: DCW Industries, 1988.
   Google Scholar
• F. R. Menter, R. Langtry, and S. Volker, “Transition modelling for general purpose CFD codes,” Flow Turbul. Combust., vol. 77, no. 1–4, pp. 277–303, 2006.
   Web of Science ®Google Scholar
• A. C. Benim, D. Brillert, and M. Cagan, “Investigation into the computational analysis of direct-transfer pre-swirl systems for gas turbine cooling,” ASME Paper No. GT2004-54151, Proceedings of ASME Turbo Expo 2004, Vienna, Austria, June 14–17, 2014, vol. 4, pp. 453–460. DOI: 10.1115/GT2004-54151,.2004.
   Google Scholar
• A. C. Benim, K. Ozkan, M. Cagan, and D. Gunes, “Computational investigation of turbulent jet impinging onto rotating disk,” Int. J. Numer. Methods Heat Fluid Flow, vol. 17, no. 3, pp. 284–301, 2007. DOI: 10.1108/09615530710730157.
   Web of Science ®Google Scholar