Reconstruction of the Boundary Condition in the Binary Alloy Solidification Problem with the Macrosegregation and the Material Shrinkage Phenomena Taken into Account

References

• C. A. A. Mota, H. R. B. Orlande, M. O. M. De Carvalho, V. Kolehmainen, and J. P. Kaipio, “Bayesian estimation of temperature-dependent thermophysical properties and transient boundary heat flux,” Heat Transfer Eng., vol. 31, no. 7, pp. 570–580, 2010. DOI: 10.1080/01457630903425635.
   Web of Science ®Google Scholar
• H. Kumar, S. Kumar, N. Gnanasekaran, and C. Balaji, “A Markov chain Monte Carlo- Metropolis hastings approach for the simultaneous estimation of heat generation and heat transfer coefficient from a Teflon Cylinder,” Heat Transfer Eng., vol. 39, no. 4, pp. 339–352, 2018. DOI: 10.1080/01457632.2017.1305823.
   Web of Science ®Google Scholar
• S. Somasundharam, and K. S. Reddy, “Inverse estimation of thermal properties using Bayesian inference and three different sampling techniques,” Inverse Probl. Sci. Eng., vol. 25, no. 1, pp. 73–88, 2017. DOI: 10.1080/17415977.2016.1138946.
   Web of Science ®Google Scholar
• E. Majchrzak, and B. Mochnacki, “Application of the BEM in the thermal theory of foundry,” Eng. Anal. Bound. Elem., vol. 16, no. 2, pp. 99–121, 1995. DOI: 10.1016/0955-7997(95)00049-6.
   Web of Science ®Google Scholar
• A. Zielonka, E. Hetmaniok, and D. Słota, “Inverse alloy solidification problem including the material shrinkage phenomenon solved by using the bee algorithm,” Int. Commun. Heat Mass Transfer, vol. 87, pp. 295–301, Oct. 2017. DOI: 10.1016/j.icheatmasstransfer.2017.07.014.
   Web of Science ®Google Scholar
• E. Hetmaniok, “Numerical procedure for heat transfer coefficient identification in solidification of binary alloys and its experimental verification,” Num. Heat Transfer B, vol. 68, no. 2, pp. 93–114, May 2015. DOI: 10.1080/10407790.2014.992090.
   Web of Science ®Google Scholar
• B. Mochnacki, and J. S. Suchy, “Simplified models of macrosegregation,” J. Theor. Appl. Mech., vol. 44, no. 2, pp. 367–379, 2006.
   Google Scholar
• V. Alexiades, and A. D. Solomon, Mathematical Modeling of Melting and Freezing Processes. Washington, DC, USA: Hemisphere, 1993.
   Google Scholar
• E. Hetmaniok, “Solution of the two-dimensional inverse problem of the binary alloy solidification by applying the Ant Colony Optimization algorithm,” Int. Commun. Heat Mass Transfer, vol. 67, pp. 39–45, Oct., 2015. DOI: 10.1016/j.icheatmasstransfer.2015.05.029.
   Web of Science ®Google Scholar
• J. Li, M. Wu, A. Ludwig, and A. Kharicha, “Simulation of macrosegregation in a 2.45-ton steel ingot using a three-phase mixed columnar equiaxed model,” Int. J. Heat Mass Transfer, vol. 72, pp. 668–679, May 2014. DOI: 10.1016/j.ijheatmasstransfer.2013.08.079.
   PubMed Web of Science ®Google Scholar
• B. Mochnacki, E. Majchrzak, and R. Szopa, “Simulation of heat and mass transfer in domain of casting made from binary alloy,” Arch. Foundry Eng., vol. 8, no. 4, pp. 121–126, 2008.
   Google Scholar
• D. Samanta, and N. Zabaras, “Numerical study of macrosegregation in aluminum alloys solidifying on uneven surfaces,” Int. J. Heat Mass Transfer, vol. 48, no. 21-22, pp. 4541–4556, Oct. 2005. DOI: 10.1016/j.ijheatmasstransfer.2005.06.008.
   Web of Science ®Google Scholar
• M. Zaloznik, S. Xin, and B. Sarler, “Verification of a numerical model of macrosegregation in direct chill casting,” Int. J. Numer. Meth. Heat Fluid Flow, vol. 18, no. 3/4, pp. 308–324, May 2008. DOI: 10.1108/09615530810853600.
   Web of Science ®Google Scholar
• A. Nawrat, J. Skorek, and A. Sachajdak, “Identification of the heat fluxes and thermal resistance on the ingot-mould surface in continuous casting of metals,” Inverse Probl. Sci. Eng., vol. 17, no. 3, pp. 399–409, 2009. DOI: 10.1080/17415970802166816.
   Web of Science ®Google Scholar
• N. I. Shestakov, Y. U. V. Lukanin, and Y. U. P. Kostin, “Heat exchange regularities in a crystallizer,” Izv. VUZ Chernaya Metall, vol. 37, no. 1, pp. 22–23, 1994. (in Russian).
   Google Scholar
• N. Cheung, N. S. Santos, J. M. V. Quaresma, G. S. Dulikravich, and A. Garcia, “Interfacial heat transfer coefficients and solidification of an aluminum alloy in a rotary continuous caster,” Int. J. Heat Mass Transfer, vol. 52, no. 1-2, pp. 451–459, 2009. DOI: 10.1016/j.ijheatmasstransfer.2008.07.003.
   Web of Science ®Google Scholar
• B. Mochnacki, and J. S. Suchy, Numerical Methods in Computations of Foundry Processes. Cracow, Poland: PFTA, 1995.
   Google Scholar
• E. Hetmaniok, D. Słota, and A. Zielonka, “Using the swarm intelligence algorithms in solution of the two-dimensional inverse Stefan problem,” Comput. Math. Appl., vol. 69, no. 4, pp. 347–361, 2015. DOI: 10.1016/j.camwa.2014.12.013.
   Web of Science ®Google Scholar
• D. Karaboga, and B. Akay, “A comparative study of artificial bee colony algorithm,” Appl. Math. Comput., vol. 214, no. 1, pp. 108–132, Aug. 2009. DOI: 10.1016/j.amc.2009.03.090.
   Web of Science ®Google Scholar
• D. Karaboga, and B. Basturk, “A powerful and efficient algorithm for numerical function optimization: artificial bee colony (ABC) algorithm,” J. Global Optim., vol. 39, no. 3, pp. 459–471, Nov., 2007. DOI: 10.1007/s10898-007-9149-x.
   Web of Science ®Google Scholar
• A. Ryfa, and R. Białecki, “Retrieving the heat transfer coefficient for jet impingement from transient temperature measurements,” Int. J. Heat Fluid Flow, vol. 32, no. 5, pp. 1024–1035, Oct. 2011. DOI: 10.1016/j.ijheatfluidflow.2011.06.005.
   Web of Science ®Google Scholar