Advanced search
Publication Cover
Heat Transfer Engineering Volume 42, 2021 - Issue 6: Special Issue: Selected Papers from the 6th International Conference on Micro and Nano Flows (MNF2018), September 9-12, 2018, Georgia Institute of Technology, Atlanta, Georgia, USA.
Submit an article Journal homepage
254
Views
4
CrossRef citations to date
0
Altmetric
Articles

Toward a Compact Wireless Surface Acoustic Wave Pirani Microsensor with Extended Range and Sensitivity

Sofia TotoInstitute of Microstructure Technology, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany; View further author information
,
Pascal NicolayCarinthia Institute for Smart Materials and Manufacturing Technologies, Carinthia University of Applied Sciences, Villach, Austria; View further author information
,
Gian Luca MoriniDipartimento di Ingegneria Industriale, Alma Mater Studiorum Università di Bologna, Bologna, ItalyView further author information
,
Achim VoigtInstitute of Microstructure Technology, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany; View further author information
,
Jan G. KorvinkInstitute of Microstructure Technology, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany; View further author information
&
Juergen J. BrandnerInstitute of Microstructure Technology, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany; Correspondence[email protected]
View further author information
Pages 565-578 | Published online: 04 Feb 2020

References

  • J. Joseph, R. Nacereddine, M. Delanaye, J. Korvink, and J. Brandner, “Advanced numerical methodology to analyze high-temperature wire-net compact heat exchangers for a micro-combined heat and power system application,” Heat Transfer Eng., vol. 41, no. 11, pp. 1–13. DOI: 10.1080/01457632.2019.1589984.
  • P. K. Weng, and J. S. Shie, “Micro pirani vacuum gauge,” Rev. Sci. Instrum., vol. 65, no. 2, pp. 492–499, 1994. DOI: 10.1063/1.1145163.
  • S. Dushman, Scientific Foundations of Vacuum Technique. New York, NY: Chapman & Hall, 1949.
  • D. Royer, and E. Dieulesaint, Ondes élastiques dans les solides. Paris, France: Masson, 1996.
  • D. Morgan, and E. Paige, Surface Acoustic Wave Filters. 2nd ed. Oxford, UK: Academic Press, 2007.
  • X. Liu, “Qi standard wireless power transfer technology development toward spatial freedom,” IEEE Circuits Syst. Mag., vol. 15, no. 2, pp. 32–39, 2015. DOI: 10.1109/MCAS.2015.2419011.
  • P. Nicolay, and M. Lenzhofer, “A wireless and passive low-pressure sensor,” Sensors, vol. 14, no. 2, pp. 3065–3076, 2014. DOI: 10.3390/s140203065.
  • D. Mercier et al., “Characterization of a saw-pirani vacuum sensor for two different operating modes,” Sens. Actuators A: Phys., vol. 188, pp. 41–47, Dec. 2012. DOI: 10.1016/j.sna.2012.01.039.
  • S. Toto, P. Nicolay, G. L. Morini, M. Rapp, J. G. Korvink, and J. J. Brandner, “Design and simulation of a wireless sawpirani sensor with extended range and sensitivity,” Sensors, vol. 19, no. 10, p. 2421, 2019. DOI: 10.3390/s19102421.
  • F. Voelklein, M. Grau, A. Meier, G. Hemer, and L. Breuer, “Optimized mems pirani sensor with increased pressure measurement sensitivity in the fine and high vacuum regime,” J. Vac. Sci. Technol. A, vol. 31, no. 6, pp. 061604, 2013. DOI: 10.1116/1.4819783.
  • V. Plessky, and J. Kosela, “Coupling-of-modes analysis of saw devices,” Int. J. High Speed Electron. Syst., vol. 10, no. 4, pp. 867–947, 2000. DOI: 10.1142/S0129156400000684.
  • C. Fu et al., “Design and implementation of 2.45 ghz passive saw temperature sensors with bpsk coded rfid configuration,” Sensors, vol. 17, no. 8, pp. 1849, 2017. DOI: 10.3390/s17081849.
  • H. Reichl, “Packaging and interconnection of sensors,” Sens. Actuators A: Phys., vol. 25, no. 1–3, pp. 63–71, 1990. DOI: 10.1016/0924-4247(90)87010-G.
  • S. Stoecklin, A. Yousaf, T. Volk, and L. Reindl, “Efficient wireless powering of biomedical sensor systems for multichannel brain implants,” IEEE Trans. Instrum. Meas., vol. 65, no. 4, pp. 754–764, Apr. 2016. DOI: 10.1109/TIM.2015.2482278.
  • D. Sameoto, S. Lee, and M. Parameswaran, “Electrical interconnection through optimized wirebonding onto SU-8 structures and actuators,” J. Micromech. Microeng., vol. 18, no. 7, pp. 075023, Jun. 2008.
  • C. L. Gan, U. Hashim, F. Classe, and B. L. Chan, “Future and technical considerations of gold wirebonding in semiconductor packaging a review,” Microelectronics Int., vol. 31, pp. 121–128. Apr. 2014. DOI: 10.1108/MI-07-2013-0036.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.