Evaporation Heat Transfer of R134a on outside of Smooth and Enhanced Tubes

References

• N. H. Kim, “Evaporation heat transfer and pressure drop of R-410A in three 7.0mm O.D. microfin tubes having different inside geometries,” J. Mech. Sci. Technol., vol. 29, no. 8, pp. 3519–3530, 2015. DOI: 10.1007/s12206-015-0749-y.
   Web of Science ®Google Scholar
• G. B. Jiang, J. T. Tan, Q. X. Nian, S. C. Tang and W. Q. Tao, “Experimental study of boiling heat transfer in smooth/micro-fin tubes of four refrigerants,” Int. J. Heat Mass Transf., vol. 98, pp. 631–642, Jul. 2016. DOI: 10.1016/j.ijheatmasstransfer.2016.03.024.
   Web of Science ®Google Scholar
• A. Diani, A. Cavallini and L. Rossetto, “R1234yf flow boiling heat transfer inside a 2.4-mm microfin tube,” Heat Transf. Eng., vol. 38, no. 3, pp. 303–312, 2017. DOI: 10.1080/01457632.2016.1189260.
   Web of Science ®Google Scholar
• D. Jige, K. Sagawa, S. Iizuka and N. Inoue, “Boiling heat transfer and flow characteristic of R32 inside a horizontal small-diameter microfin tube,” Int. J. Refrig., vol. 95, pp. 73–82, Nov. 2018. DOI: 10.1016/j.ijrefrig.2018.08.019.
   Web of Science ®Google Scholar
• X. Chen, W. Li, Z. Sun, Y. Ren, F. Liu and J-l Xu, “Correlation of evaporation heat transfer inside 8.8 mm and 7.14 mm horizontal round micro-fin tubes,” Heat Transf. Eng., vol. 40, no. 3–4, pp. 320–329, 2019. DOI: 10.1080/01457632.2018.1429054.
   Web of Science ®Google Scholar
• Z. Wu, B. Sundén, V. V. Wadekar and W. Li, “Heat transfer correlations for single-phase flow, condensation, and boiling in microfin tubes,” Heat Transf. Eng., vol. 36, no. 6, pp. 582–595, 2015. DOI: 10.1080/01457632.2014.939531.
   Web of Science ®Google Scholar
• W. Y. Tang and W. Li, “A new heat transfer model for flow boiling of refrigerants in micro-fin tubes,” Int. J. Heat Mass Transf., vol. 126, pp. 1067–1078, Nov. 2018. DOI: 10.1016/j.ijheatmasstransfer.2018.06.066.
   Web of Science ®Google Scholar
• M. Kim and K. Cho, “Evaporation heat transfer coefficients of R-446A,” Heat Transf. Eng., vol. 40, no. 12, pp. 973–984, 2019. DOI: 10.1080/01457632.2018.1450328.
   Web of Science ®Google Scholar
• J-x Chen, et al., “Investigation on flow condensation of refrigerant in annulus of smooth and enhanced tube-in-tube heat exchanger,” Heat Mass Transf., vol. 55, no. 1, pp. 223–234, 2019. DOI: Doi.org/10.1007/s00231-018-2406-3. DOI: 10.1007/s00231-018-2406-3.
   Web of Science ®Google Scholar
• D. J. Kukulka, R. Smith and W. Li, “Comparison of tubeside condensation and evaporation characteristics of smooth and enhanced heat transfer 1EHT tubes,” Appl. Therm. Eng., vol. 89, pp. 1079–1086, Oct. 2015. DOI: 10.1016/j.applthermaleng.2015.01.066.
   Web of Science ®Google Scholar
• S-p Guo, et al., “Condensation and evaporation heat transfer characteristics in horizontal smooth, herringbone and enhanced surface EHT tubes,” Int. J. Heat Mass Transf., vol. 85, pp. 281–291, Jun. 2015. DOI: 10.1016/j.ijheatmasstransfer.2015.01.115.
   Web of Science ®Google Scholar
• W. Li, et al., “Condensation Heat Transfer of R410A on Outside of Horizontal Smooth and Three-dimensional Enhanced Tubes,” Int. J. Refrig., vol. 98, pp. 1–14, Feb. 2019. DOI: 10.1016/j.ijrefrig.2018.09.035.
   Web of Science ®Google Scholar
• V. Gnielinski, “New equations for heat and mass transfer in turbulent pipe and channel flow,” Int. Chem. Eng., vol. 16, no. 2, pp. 359–368, 1976.
   Web of Science ®Google Scholar
• B. S. Petukhov, “Heat transfer and friction in turbulent pipe flow with variable physical properties,” Adv. Heat Tranf., vol. 6, no. 503, pp. 503–564, 1970. DOI: 10.1016/S0065-2717(08)70153-9.
   Google Scholar
• M. H. Kim and J. S. Shin, “Evaporating heat transfer of R22 and R410A in horizontal smooth and micro-fin tubes,” Int. J. Refrig., vol. 28, no. 6, pp. 940–948, 2005. DOI: 10.1016/j.ijrefrig.2005.01.016.
   Web of Science ®Google Scholar
• J. Fernández-Seara, F. J. Uhía, J. Sieres and A. Campo, “A general review of the Wilson plot method and its modifications to determine convection coefficients in heat exchange devices,” Appl. Therm. Eng., vol. 27, no. 17–18, pp. 2745–2757, 2007. DOI: 10.1016/j.applthermaleng.2007.04.004.
   Web of Science ®Google Scholar
• P. G. Vicente, A. García and A. Viedma, “Heat transfer and pressure drop for low Reynolds turbulent flow in helically dimpled tubes,” Int. J. Heat Mass Transf., vol. 45, no. 3, pp. 543–553, 2002. DOI: 10.1016/S0017-9310(01)00170-3.
   Web of Science ®Google Scholar
• S. Z. Rouhani and E. Axelsson, “Calculation of void volume fraction in the subcooled and quality boiling regions,” Int. J. Heat Mass Transf., vol. 13, no. 2, pp. 383–393, 1970. DOI: 10.1016/0017-9310(70)90114-6.
   Web of Science ®Google Scholar
• E. W. Lemmon, M. L. Huber and M. O. McLinden, NIST Standard Reference Database 23. NIST Reference Fluid Thermodynamic and Transport Properties - REFPROP, 9.1, 2013.
   Google Scholar
• B. S. Petukhov and V. V. Kirilov, “The problem of heat exchange in the turbulent flow of liquids in tubes,” Teploenergetika, vol. 4, no. 4, pp. 63–68, 1958.
   Google Scholar
• B. S. Petukhov and V. N. Popov, “Theoretical calculation of heat exchange in turbulent flow in tubes of an incompressible fluid with variable physical properties,” High Temp., vol. 1, no. 1, pp. 69–83, 1963.
   Google Scholar
• F. W. Dittus and L. M. K. Boelter, “Heat transfer in automobile radiators of the tubular type,” Int. Commun. Heat Mass, vol. 12, no. 1, pp. 3–22, 1985. DOI: 10.1016/0735-1933(85)90003-X.
   Web of Science ®Google Scholar
• M. A. Akhavan-Behabadi, S. G. Mohseni and S. M. Razavinasab, “Evaporation Heat transfer of R-134a inside a microfin tube with different tube inclinations,” Exp. Therm. Fluid Sci., vol. 35, no. 6, pp. 996–1001, 2011. DOI: 10.1016/j.expthermflusci.2011.01.020.
   Web of Science ®Google Scholar
• S. Wellsandt and L. Vamling, “Evaporation of R407C and R410A in a horizontal Herringbone microfin tube: heat transfer and pressure drop,” Int. J. Refrig., vol. 28, no. 6, pp. 901–911, 2005. DOI: 10.1016/j.ijrefrig.2005.01.006.
   Web of Science ®Google Scholar
• J. C. Chen, “Correlation for boiling heat transfer to saturated fluids in convective flow,” Ind. Eng. Chem. Process Des. Dev., vol. 5, no. 3, pp. 322–329, 1966. DOI: 10.1021/i260019a023.
   Web of Science ®Google Scholar
• L. Wojtan, T. Ursenbacher and J. R. Thome, “Investigation of flow boiling in horizontal tubes: Part II—Development of a new heat transfer model for stratified-wavy, dryout and mist flow regimes,” Int. J. Heat Mass Transf., vol. 48, no. 14, pp. 2970–2985, 2005. DOI: 10.1016/j.ijheatmasstransfer.2004.12.013.
   Web of Science ®Google Scholar
• Z. Liu and R. H. S. Winterton, “A general correlation for saturated and subcooled flow boiling in tubes and annuli, based on a nucleate pool boiling equation,” Int. J. Heat Mass Transf., vol. 34, no. 11, pp. 2759–2766, 1991. DOI: 10.1016/0017-9310(91)90234-6.
   Web of Science ®Google Scholar
• K. E. Gungor and R. H. S. Winterton, “A general correlation for flow boiling in tubes and annuli,” Int. J. Heat Mass Transf., vol. 29, no. 3, pp. 351–358, 1986. DOI: 10.1016/0017-9310(86)90205-X.
   Web of Science ®Google Scholar
• M. G. Cooper, “Saturation nucleate pool boiling - a simple correlation,” Inst. Chem. Eng. Symp. Ser., vol. 86, no. 2, pp. 785–793, 1984. DOI: 10.1016/B978-0-85295-175-0.50013-8.
   Google Scholar