Selection Maps of Explicit Colebrook Approximations according to Calculation Time and Precision

References

• C. F. Colebrook and C. M. White, “Experiments with fluid friction in roughened pipes,” Proc. R. Soc. Lond. Ser. A, Math. Phys. Sci., vol. 161, no. 906, pp. 367–381, 1937. http://dx.doi.org/10.1098/rspa.1937.0150.
   Google Scholar
• C. F. Colebrook, “Turbulent flow in pipes, with particular reference to the transition region between the smooth and rough pipe laws,” J. Inst. Civil Eng., vol. 11, no. 4, pp. 133–156, 1939. DOI: 10.1680/ijoti.1939.13150.
   Google Scholar
• M. Salehi, A. Sleiti, and S. Idem, “Study to identify computational fluid dynamics models for use in determining HVAC duct fitting loss coefficients,” Sci. Technol. Built Environ., vol. 23, no. 1, pp. 181–191, 2017. DOI: 10.1080/23744731.2016.1204889.
   Web of Science ®Google Scholar
• M. Salehi, S. Idem, and A. Sleiti, “Experimental determination and computational fluid dynamics predictions of pressure loss in close-coupled elbows (RP-1682),” Sci. Technol. Built Environ., vol. 23, no. 7, pp. 1132–1141, 2017. DOI: 10.1080/23744731.2016.1268904.
   Web of Science ®Google Scholar
• N. K. Mylaram and S. Idem, “Pressure loss coefficient measurements of two close-coupled HVAC elbows,” HVAC&R Res., vol. 11, no. 1, pp. 133–146, 2005. DOI: 10.1080/10789669.2005.10391130.
   Web of Science ®Google Scholar
• R. K. Hodges, D. Kulkarni, and S. Idem, “Pressure loss in fully stretched nonmetallic flexible duct with a bend,” HVAC&R Res., vol. 19, no. 1, pp. 87–100, 2013. http://dx.doi.org/10.1080/10789669.2012.744218.
   Web of Science ®Google Scholar
• O. B. Adeyinka and G. F. Naterer, “Measured turbulent entropy production with large eddy particle image velocimetry,” Exp. Fluids, vol. 42, no. 6, pp. 881–891, 2007. DOI: 10.1007/s00348-007-0292-4.
   Web of Science ®Google Scholar
• J. MacKenzie, D. Söderberg, A. Swerin, and F. Lundell, “Turbulent stress measurements with phase-contrast magnetic resonance through tilted slices,” Exp. Fluids, vol. 58, no. 5, pp. 51–62, 2017. DOI: 10.1007/s00348-017-2328-8.
   Web of Science ®Google Scholar
• K. Nilpueng and S. Wongwises, “Numerical simulation of refrigerants flowing through short-tube orifices during flashing process,” HVAC&R Res., vol. 19, no. 2, pp. 159–174, 2013. http://dx.doi.org/10.1080/10789669.2012.751812.
   Web of Science ®Google Scholar
• A. Paruchuri and S. Idem, “Determine the absolute roughness of phenolic duct (RP-1764),” Sci. Technol. Built Environ., vol. 25, no. 4, pp. 409–420, 2019. DOI: 10.1080/23744731.2018.1539616.
   Web of Science ®Google Scholar
• B. Crittenden and N. Alderman, “Mechanisms by which fouling can increase overall heat transfer coefficients,” Heat Transfer Eng., vol. 13, no. 4, pp. 32–41, 1992. DOI: 10.1080/01457639208939786.
   Web of Science ®Google Scholar
• F. Fiorelli and O. Silvares, “Refrigerant mixtures flow through capillary tubes: a comparison between homogeneous and separated-flow models,” HVAC&R Res., vol. 9, no. 1, pp. 33–53, 2003. DOI: 10.1080/10789669.2003.10391055.
   Web of Science ®Google Scholar
• G. P. Celata, “Single-phase heat transfer and fluid flow in micropipes,” Heat Transfer Eng., vol. 25, no. 3, pp. 13–22, 2004. DOI: 10.1080/01457630490280029.
   Web of Science ®Google Scholar
• P. Zhang, “Flow and heat transfer characteristics of liquid nitrogen in mini-/microchannels,” Heat Transfer Eng., vol. 34, no. 2-3, pp. 201–212, 2013. DOI: 10.1080/01457632.2013.703543.
   Web of Science ®Google Scholar
• S. Wang, J. Wen, and Y. Li, “Experimental investigation of heat transfer and pressure drop in a mini-channel shell and tube heat exchanger,” Appl. Therm. Eng., vol. 29, no. 11, pp. 2433–2438, 2009. DOI: 10.1016/j.applthermaleng.2008.12.008.
   Web of Science ®Google Scholar
• J. Leverette, K. Gebke, and S. Idem, “Pressure and velocity variation in a fabric air dispersion system,” HVAC&R Res., vol. 20, no. 8, pp. 862–874, 2014. DOI: 10.1080/10789669.2014.957592.
   Web of Science ®Google Scholar
• S. Duong, R. Craven, S. Garner, and S. Idem, “A novel evaporative cooling tower constructed from an inflatable fabric duct,” Sci. Technol. Built Environ., vol. 24, no. 3, pp. 1–34, 2018. DOI: 10.1080/23744731.2018.1460146.
   Web of Science ®Google Scholar
• M. Esfahani, M. R. Nunna, L. E. Mohseni, K. Nawaz, and G. Cunningham, “Experimental study on heat transfer and pressure drop of in-house synthesized graphene oxide nanofluids,” Heat Transfer Eng., vol. 40, no. 20, pp. 1722–1735, 2019. DOI: 10.1080/01457632.2018.1497001.
   Web of Science ®Google Scholar
• S. E. Haaland, “Simple and explicit formulas for the friction factor in turbulent pipe flow,” J. Fluids Eng., vol. 105, no. 1, pp. 89–90, 1983. DOI: 10.1115/1.3240948.
   Web of Science ®Google Scholar
• D. Brkić, “Review of explicit approximations to the Colebrook relation for flow friction,” J. Pet. Sci. Eng., vol. 77, no. 1, pp. 34–48, 2011. DOI: 10.1016/j.petrol.2011.02.006.
   Web of Science ®Google Scholar
• A. Çebi, E. Akdogan, A. Celen, and A. Dalkilic, “Prediction of friction factor of pure water flowing inside vertical smooth and microfin tubes by using artificial neural networks,” Heat Mass Transfer, vol. 53, no. 2, pp. 673–685, 2016. DOI: 10.1007/s00231-016-1850-1.
   Web of Science ®Google Scholar
• S. Eckels and G. D. Holthaus, “Single-phase heat transfer and pressure drop performance in smooth tubes with R-22, R-134a, R-407C, and R-410A at superheated conditions with lubricant mixtures (RP-1067),” HVAC&R Res., vol. 10, no. 4, pp. 421–440, 2004. DOI: 10.1080/10789669.2004.10391112.
   Web of Science ®Google Scholar
• L. E. Muzzo, D. Pinho, L. E. M. Lima, and L. F. Ribeiro, “Accuracy/speed analysis of pipe friction factor correlations,” INCREaSE 2019: Proceedings of the 2nd International Congress on Engineering and Sustainability in the XXI Century, Faro, Portugal, Oct. 9–11, 2019. http://dx.doi.org/10.1007/978-3-030-30938-1_51.
   Google Scholar
• P. Rollmann and K. Spindler, “Explicit representation of the implicit Colebrook–White equation,” Case Stud. Therm. Eng., vol. 5, pp. 41–47. 2015. DOI: 10.1016/j.csite.2014.12.001.
   Web of Science ®Google Scholar
• D. Brkić, “A note on explicit approximations to Colebrook’s friction factor in rough pipes under highly turbulent cases,” Int. J. Heat Mass Transfer, vol. 93, pp. 513–515, 2016. DOI: 10.1016/j.ijheatmasstransfer.2015.08.109.
   Web of Science ®Google Scholar
• M. M. Shaikh, S. R. Massan, and A. I. Wagan, “A new explicit approximation to Colebrook’s friction factor in rough pipes under highly turbulent cases,” Int. J. Heat Mass Transfer, vol. 88, pp. 538–543, 2015. DOI: 10.1016/j.ijheatmasstransfer.2015.05.006.
   Web of Science ®Google Scholar
• M. Schultz and A. Myers, “Comparison of three roughness function determination methods,” Exp. Fluids, vol. 35, no. 4, pp. 372–379, 2003. DOI: 10.1007/s00348-003-0686-x.
   Web of Science ®Google Scholar
• U. Şahin, “A new non-iterative friction factor correlation for heat transfer fluids in absorber tube of parabolic trough collector,” Eng. Sci. Technol., Int. J., vol. 21, no. 1, pp. 89–98, 2018. DOI: 10.1016/j.jestch.2018.02.004.
   Google Scholar
• T. Hirsch, J. F. Feldhoff, K. Hennecke, and R. Pitz-Paal, “Advancements in the field of direct steam generation in linear solar concentrators - a review,” Heat Transfer Eng., vol. 35, no. 3, pp. 258–271, 2014. DOI: 10.1080/01457632.2013.825172.
   Web of Science ®Google Scholar
• P. Swamee and A. K. Jain, “Explicit equations for pipe flow problems,” J. Hydraulics Div., vol. 102, pp. 657–664, 1976.
   Web of Science ®Google Scholar
• S. Ateş, “Hydraulic modelling of closed pipes in loop equations of water distribution networks,” Appl. Math. Modell., vol. 40, no. 2, pp. 966–983, 2016. DOI: 10.1016/j.apm.2015.06.017.
   Web of Science ®Google Scholar
• J. Rojas, C. Verde, L. Torres, , and E. Pérez, “On-line head loss identification for monitoring of pipelines,” IFAC-PapersOnLine, vol. 51, no. 24, pp. 748–754, 2018. DOI: 10.1016/j.ifacol.2018.09.659.
   Google Scholar
• A. López-Benito, F. J. Elorza Tenreiro, and L. C. Gutiérrez-Pérez, “Steady-state non-isothermal flow model for natural gas transmission in pipes,” Appl. Math. Modell., vol. 40, no. 23-24, pp. 10020–10037, 2016. DOI: 10.1016/j.apm.2016.06.057.
   Web of Science ®Google Scholar
• M. Chaczykowski, “Transient flow in natural gas pipeline - The effect of pipeline thermal model,” Appl. Math. Modell., vol. 34, no. 4, pp. 1051–1067, 2010. DOI: 10.1016/j.apm.2009.07.017.
   Web of Science ®Google Scholar
• L. Kim, K. Son, D. Sarker, J. Jeong, and S. Lee, “An assessment of models for predicting refrigerant characteristics in adiabatic and non-adiabatic capillary tubes,” Heat Mass Transfer, vol. 47, no. 2, pp. 163–180, 2011. DOI: 10.1007/s00231-010-0697-0.
   Web of Science ®Google Scholar
• S. Fries, S. Skusa, and A. Luke, “Heat transfer and pressure drop of condensation of hydrocarbons in tubes,” Heat Mass Transfer, vol. 55, no. 1, pp. 33–40, 2019. DOI: 10.1007/s00231-018-2318-2.
   Web of Science ®Google Scholar
• G. J. Brereton and J. Yuan, “Wall-roughness eddy viscosity for Reynolds-averaged closures,” Int. J. Heat Fluid Flow, vol. 73, pp. 74–81, 2018. DOI: 10.1016/j.ijheatfluidflow.2018.07.009.
   Web of Science ®Google Scholar
• J. M. Barros, M. P. Schultz, and K. A. Flack, “Measurements of skin-friction of systematically generated surface roughness,” Int. J. Heat Fluid Flow, vol. 72, pp. 1–7, 2018. DOI: 10.1016/j.ijheatfluidflow.2018.04.015.
   Web of Science ®Google Scholar
• B. Aupoix, “Improved heat transfer predictions on rough surfaces,” Int. J. Heat Fluid Flow, vol. 56, pp. 160–171, 2015. DOI: 10.1016/j.ijheatfluidflow.2015.07.007.
   Web of Science ®Google Scholar
• D. Taler, “A new heat transfer correlation for transition and turbulent fluid flow in tubes,” Int. J. Therm. Sci., vol. 108, pp. 108–122, 2016. DOI: 10.1016/j.ijthermalsci.2016.04.022.
   Web of Science ®Google Scholar
• D. Taler, “Determining velocity and friction factor for turbulent flow in smooth tubes,” Int. J. Therm. Sci., vol. 105, pp. 109–122, 2016. DOI: 10.1016/j.ijthermalsci.2016.02.011.
   Web of Science ®Google Scholar
• R. Laskowski, “Relations for steam power plant condenser performance in off-design conditions in the function of inlet parameters and those relevant in reference conditions,” Appl. Therm. Eng., vol. 103, pp. 528–536, 2016. DOI: 10.1016/j.applthermaleng.2016.04.127.
   Web of Science ®Google Scholar
• V. Mrzljak, I. Poljak, and V. V. Medica, “Dual fuel consumption and efficiency of marine steam generators for the propulsion of LNG carrier,” Appl. Therm. Eng., vol. 119, pp. 331–346, 2017. DOI: 10.1016/j.applthermaleng.2017.03.078.
   Web of Science ®Google Scholar
• H. Hajebzadeh, A. N. M. Ansari, and S. Niazi, “Mathematical modeling and validation of a 320 MW tangentially fired boiler: A case study,” Appl. Therm. Eng., vol. 146, pp. 232–242, 2019. DOI: 10.1016/j.applthermaleng.2018.09.102.
   Web of Science ®Google Scholar
• V. Mrzljak, I. Poljak, and V. V. Medica, “Thermodynamical analysis of high-pressure feed water heater in steam propulsion system during exploitation,” Shipbuilding: theory and practice of naval architecture,” Mar. Eng. Ocean Eng., vol. 68, no. 2, pp. 45–61, 2017. DOI: 10.21278/brod68204.
   Web of Science ®Google Scholar
• A. Toptan, N. W. Porter, R. K. Salko, and M. N. Avramova, “Implementation and assessment of wall friction models for LWR core analysis,” Ann. Nucl. Energy, vol. 115, pp. 565–572, 2018. DOI: 10.1016/j.anucene.2018.02.022.
   Web of Science ®Google Scholar
• J. H. Yang, D. J. Euh, H. K. Cho, and G. C. Park, “Development of wall and interfacial friction models for two-dimensional film flow with local measurement methods,” Nucl. Eng. Des., vol. 336, pp. 141–153, 2018. DOI: 10.1016/j.nucengdes.2017.10.015.
   Web of Science ®Google Scholar
• D. Brkić and P. Praks, “Colebrook’s flow friction explicit approximations based on fixed-point iterative cycles and symbolic regression,” Computation, vol. 7, no. 3, pp. 48–59, 2019. DOI: 10.3390/computation7030048.
   Web of Science ®Google Scholar
• G. Papaevangelou, C. Evangelides, and C. Tzimopoulos, “A new explicit equation for the friction coefficient in the Darcy-Weisbach equation,” Proceedings of the Tenth Conference on Protection and Restoration of the Environment, Corfu, Greece, Jul. 6–9, 2010.
   Google Scholar
• A. Avci and I. Karagoz, “A novel explicit equation for friction factor in smooth and rough pipes,” J. Fluids Eng., vol. 131, no. 6, pp. 66–69, 2009. DOI: 10.1115/1.3129132.
   Web of Science ®Google Scholar
• D. Buzzelli, “Calculating friction in one step,” Mach. Des., vol. 80, pp. 54–55, 2008.
   Google Scholar
• A. R. Vatankhah and S. Kouchakzadeh, “Discussion of “Turbulent flow friction factor calculation using a mathematically exact alternative to the Colebrook” by J. R. Sonnad and Shetan C. T. Goudar,” J. Hydraulic Eng., vol. 134, no. 8, pp. 1187–1187, 2008. DOI: 10.1061/(ASCE)0733-9429(2008)134:8(1187).
   Web of Science ®Google Scholar
• J. R. Sonnad and C. T. Goudar, “Turbulent flow friction factor calculation using a mathematically exact alternative to the Colebrook-White equation,” J. Hydraulic Eng., vol. 132, no. 8, pp. 863–867, 2006. DOI: 10.1061/(ASCE)0733-9429(2006)132:8(863).
   Web of Science ®Google Scholar
• E. Romeo, C. Royo, and A. Monzon, “Improved explicit equation for estimation of the friction factor in rough and smooth pipes,” Chem. Eng. J., vol. 86, no. 3, pp. 369–374, 2002. DOI: 10.1016/S1385-8947(01)00254-6.
   Web of Science ®Google Scholar
• G. Manadilli, “Replace implicit equations with signomial functions,” Chem. Eng., vol. 104, no. 8, pp. 129–130, 1997.
   Web of Science ®Google Scholar
• T. K. Serghides, “Estimate friction factor accurately,” Chem. Eng., vol. 91, no. 5, pp. 63–64, 1984.
   Web of Science ®Google Scholar
• D. J. Zigrang and N. D. Sylvester, “Explicit approximations to the solution of Colebrook’s friction factor equation,” AIChE J., vol. 28, no. 3, pp. 514–515, 1982. DOI: 10.1002/aic.690280323.
   Web of Science ®Google Scholar
• D. I. H. Barr, Colebrook White, “Solutions of the Colebrook-White function for resistance to uniform turbulent flow,” Proc. Inst. Civil Eng., vol. 71, no. 2, pp. 529–535, 1981. DOI: 10.1680/iicep.1981.1895.
   Web of Science ®Google Scholar
• G. F. Round, “An explicit approximation for the friction factor‐Reynolds number relation for rough and smooth pipes,” Can. J. Chem. Eng., vol. 58, no. 1, pp. 122–123, 1980. DOI: 10.1002/cjce.5450580119.
   Web of Science ®Google Scholar
• N. H. Chen, “An explicit equation for friction factor in pipe,” Ind. Eng. Chem. Fundam., vol. 18, no. 3, pp. 296–297, 1979. DOI: 10.1021/i160071a019.
   Web of Science ®Google Scholar
• S. W. Churchill, “Friction-factor equation spans all fluid-flow regimes,” Chem. Eng. J., vol. 84, pp. 91–92, 1977.
   Google Scholar
• A. K. Jain, “Accurate explicit equation for friction,” J. Hydraulics Div., vol. 102, no. 5, pp. 674–677, 1976.
   Google Scholar
• S. W. Churchill, “Empirical expressions for the shear stress in turbulent flow in commercial pipe,” AIChE J., vol. 19, pp. 375–376, 1973. DOI: 10.1002/aic.690190228.
   Web of Science ®Google Scholar
• B. Eck, Technische Strömungslehre. New York: Springer, 1973.
   Google Scholar
• D. J. Wood, “An explicit friction factor relationship,” Civil Eng. J., vol. 36, no. 12, pp. 60–61, 1966.
   Google Scholar
• L. F. Moody, “An approximate formula for pipe friction factors,” Trans. ASME, vol. 69, pp. 1005–1011, 1947.
   Google Scholar
• S. Genić, et al., “A review of explicit approximations of Colebrook’s Equation,” FME Trans., vol. 39, no. 2, pp. 67–71, 2011.
   Google Scholar
• L. S. Lasdon, A. D. Waren, A. Jain, and M. Ratner, “Design and testing of a generalized reduced gradient code for nonlinear programming,” ACM Trans. Math. Software, vol. 4, no. 1, pp. 34–50, 1978. DOI: 10.1145/355769.355773.
   Google Scholar
• V. V. Medica, B. Pavković, and V. Mrzljak, “Numerical model for on-condition monitoring of condenser in coal-fired power plants,” Int. J. Heat Mass Transfer, vol. 117, pp. 912–923, 2018. DOI: 10.1016/j.ijheatmasstransfer.2017.10.047.
   Web of Science ®Google Scholar
• G. R. Ahmadi and D. Toghraie, “Energy and exergy analysis of Montazeri steam power plant in Iran,” Renew. Sustain. Energy Rev., vol. 56, pp. 454–463, 2016. http://dx.doi.org/10.1016/j.rser.2015.11.074. DOI: 10.1016/j.rser.2015.11.074.
   Web of Science ®Google Scholar
• A. Naserbegi, M. Aghaie, A. Minuchehr, and G. Alahyarizadeh, “A novel exergy optimization of Bushehr nuclear power plant by gravitational search algorithm (GSA),” Energy, vol. 148, pp. 373–385, 2018. DOI: 10.1016/j.energy.2018.01.119.
   Web of Science ®Google Scholar
• T. Koroglu and O. S. Sogut, “Conventional and advanced exergy analyses of a marine steam power plant,” Energy, vol. 163, pp. 392–403, 2018. DOI: 10.1016/j.energy.2018.08.119.
   Web of Science ®Google Scholar
• V. Mrzljak, I. Poljak, and T. Mrakovčić, “Energy and exergy analysis of the turbo-generators and steam turbine for the main feed water pump drive on LNG carrier,” Energy Convers. Manage., vol. 140, pp. 307–323, 2017. DOI: 10.1016/j.enconman.2017.03.007.
   Web of Science ®Google Scholar
• M. Moran, H. Shapiro, D. D. Boettner, and M. B. Bailey, Fundamentals of Engineering Thermodynamics, 7th ed. Danvers, MA, USA: John Wiley and Sons, Inc., 2011.
   Google Scholar
• Z. Schwartz, et al., “Effect of micrometer-scale roughness of the surface of Ti6Al4V pedicle screws in vitro and in vivo,” J. Bone Joint Surg., vol. 90, no. 11, pp. 2485–2498, 2008. DOI: 10.2106/JBJS.G.00499.
   PubMed Web of Science ®Google Scholar
• G. D. Revankar, R. Shetty, S. S. Rao, and N. Gaitonde, “Analysis of surface roughness and hardness in titanium alloy machining with polycrystalline diamond tool under different lubricating modes,” Mater. Res., vol. 17, no. 4, pp. 1010–1022, 2014. DOI: 10.1590/1516-1439.265114.
   Web of Science ®Google Scholar
• A. Toloei, V. Stoilov, and D. Northwood, “The relationship between surface roughness and corrosion,” ASME 2013 International Mechanical Engineering Congress and Exposition, San Diego, CA, USA, Nov. 15–21, 2013. DOI: 10.1115/IMECE2013-65498.
   Google Scholar
• “KRT Product Supply Ltd.” [Online]. Available: http://www.krtproduct.com. Accessed: Feb. 12, 2019.
   Google Scholar
• “Industria ControlPro S.A de C.V.” [Online]. Available: http://www.industriascontrolpro.com. Accessed: Feb. 12, 2019.
   Google Scholar
• “GHM Messtechnik GmbH Kompetenz-Center Greisinger.” [Online]. Available: https://www.greisinger.de. Accessed Feb. 15, 2019.
   Google Scholar