Optimization of Heat Transfer and Pressure Drop in Axially Finned Staggered Tube Banks

References

• R. Hilpert, “Waermeabgabe von geheizten rohren, and raehten,” Forsch Ing-Wes, vol. 4, no. 5, pp. 215–224, 1933. DOI: 10.1007/BF02719754.
   Google Scholar
• E. D. Grimison, “Correlation and utilization of new data on flow resistance and heat transfer for cross flow of gases over tube banks,” Trans. ASME, vol. 59, pp. 583–594, Oct. 1937.
   Google Scholar
• A. Zukauskas, “Convective heat transfer in cross flow,” in Handbook of Single Phase Convective Heat Transfer, S. Kakac, R. K. Shah, and W. Aung, Eds. New York: Wiley, 1987, chap. 6.
   Google Scholar
• T. Välikangas and R. Karvinen, “Conjugated heat transfer simulation of a fin-and-tube heat exchanger,” Heat Transf. Eng., vol. 39, no. 13-14, pp. 1192–1200, 2018. DOI: 10.1080/01457632.2017.1363628.
   Web of Science ®Google Scholar
• V. Gnielinski, “Heat transfer in cross flow around single rows of tubes and through tube bundles,” in VDI Heat Atlas, Berlin: Springer–Verlag, 2010, pp. 725–729.
   Google Scholar
• E. S. Gaddis, “Pressure drop of tube bundles in cross flow,” in VDI Heat Atlas, Berlin: Springer–Verlag, 2010, pp. 1076–1091.
   Google Scholar
• C.-N. Lin, Y.-W. Liu, and J.-S. Leu, “Heat transfer and fluid flow analysis for plate-fin and oval tube heat exchangers with vortex generators,” Heat Transf. Eng., vol. 29, no. 7, pp. 588–596, 2008. DOI: 10.1080/01457630801922279.
   Web of Science ®Google Scholar
• B. Lotfi and B. Sundén, “Thermo-hydraulic performance enhancement of finned elliptical tube heat exchangers by utilizing ınnovative dimple turbulators,” Heat Transf. Eng., vol. 41, no. 13, pp. 1117–1142, 2020. DOI: 10.1080/01457632.2019.1611132.
   Web of Science ®Google Scholar
• E. M. Sparrow and S. S. Kang, “Longitudinally-finned cross-flow tube banks and their heat transfer and pressure drop characteristics,” Int. J. Heat Mass Transf., vol. 28, no. 2, pp. 339–350, 1985. DOI: 10.1016/0017-9310(85)90067-5.
   Web of Science ®Google Scholar
• C. K. Mangrulkar, A. S. Dhoble, S. G. Chakrabarty, and U. S. Wankhede, “Experimental and CFD prediction of heat transfer and friction factor characteristics in cross flow tube bank with ıntegral splitter plate,” Int. J. Heat Mass Transf., vol. 104, pp. 964–978, Jan. 2017. DOI: 10.1016/j.ijheatmasstransfer.2016.09.013.
   Web of Science ®Google Scholar
• R. Wejkowski, “Heat transfer and pressure loss in combined tube banks with triple-finned tubes,” Heat Transf. Eng., vol. 37, no. 1, pp. 45–52, 2016. DOI: 10.1080/01457632.2015.1042336.
   Web of Science ®Google Scholar
• S. Jayavel and S. Tiwari, “Effect of vortex generators and ıntegral splitter plate on heat transfer and pressure drop for laminar flow past channel-confined tube banks,” Heat Transf. Eng., vol. 31, no. 5, pp. 383–394, 2010. DOI: 10.1080/01457630903373223.
   Web of Science ®Google Scholar
• A. Yilmaz and T. Yilmaz, “Optimum design of cross-flow in-line tubebanks at constant wall temperature,” Heat Transf. Eng., vol. 37, no. 6, pp. 523–534, 2016. DOI: 10.1080/01457632.2015.1060753.
   Web of Science ®Google Scholar
• A. Yilmaz, M. T. Erdinc, and T. Yilmaz, “Optimization of crossflow staggered tube banks for prescribed pressure loss and effectiveness,” J. Thermophys. Heat Transf., vol. 31, no. 4, pp. 878–888, Oct. – Dec. 2017. 2017 DOI: 10.2514/1.T5033.
   Web of Science ®Google Scholar
• S. Jayavel and S. Tiwari, “Numerical study of heat transfer and pressure drop for flow past ınline and staggered tube bundles,” Int. J. Numer. Methods Heat Fluid Flow, vol. 19, no. 8, pp. 931–949, 2009. DOI: 10.1108/09615530910994432.
   Web of Science ®Google Scholar
• S. Aiba, H. Tsuchida and T. Ota, “Heat transfer around tubes in staggered tube banks,” Bull. JSME, vol. 25, no. 204, pp. 927–933, 1982. DOI: 10.1299/jsme1958.25.927.
   Google Scholar
• A. Yilmaz, “Minimum entropy generation for laminar flow at constant wall temperature in a circular duct for optimum design,” Heat Mass Transf., vol. 45, no. 11, pp. 1415–1421, 2009. DOI: 10.1007/s00231-009-0519-4.
   Web of Science ®Google Scholar
• Z. Shi and T. Dong, “Entropy generation and optimization of laminar convective heat transfer and fluid flow in a microchannel with staggered arrays of pin fin structure with tip clearance,” Energy Convers. Manage, vol. 94, pp. 493–504, Apr. 2015. DOI: 10.1016/j.enconman.2015.02.009.
   Web of Science ®Google Scholar
• A. Yilmaz, T. Yilmaz, and O. Buyukalaca, “Optimum shape and dimensions of ducts for convective heat transfer in laminar flow at constant wall temperature,” Int. J. Heat Mass Transf., vol. 43, no. 5, pp. 767–775, 2000. DOI: 10.1016/S0017-9310(99)00189-1.
   Web of Science ®Google Scholar
• A. Yilmaz, “Optimum length of tubes for heat transfer in turbulent flow at constant wall temperature,” Int. J. Heat Mass Transf., vol. 51, nos. 13-14, pp. 3478–3485, 2008. DOI: 10.1016/j.ijheatmasstransfer.2007.10.034.
   Web of Science ®Google Scholar
• W. A. Khan and O. U. Khan, “Analytical/numerical study of fluid flow and heat transfer across in-line cylinders,” J. Thermophys. Heat Transf., vol. 30, no. 3, pp. 490–498, 2016. DOI: 10.2514/1.T4668.
   Web of Science ®Google Scholar
• S. Rashidi, M. Bovand, and J. A. Esfahai, “Heat transfer enhancement and pressure drop penalty in porous solar heat exchangers: a sensitivity analysis,” Energy Convers. Manage, vol. 103, pp. 726–738, Oct. 2015. DOI: 10.1016/j.enconman.2015.07.019.
   Web of Science ®Google Scholar
• A. Bejan, A. J. Fowler, and G. Stanescu, “The optimal spacing between horizontal cylinders in a fixed volume cooled by natural convection,” Int. J. Heat Mass Transf., vol. 38, no. 11, pp. 2047–2055, 1995. DOI: 10.1016/0017-9310(94)00312-J.
   Web of Science ®Google Scholar
• A. J. Fowler, G. A. Ledezma, and A. Bejan, “Optimal geometric arrangement of staggered plates in forced convection,” Int. J. Heat Mass Transf., vol. 40, no. 8, pp. 1795–1805, 1997. DOI: 10.1016/S0017-9310(96)00251-7.
   Web of Science ®Google Scholar
• G. Stanescu, A. J. Fowler, and A. Bejan, “The optimal spacing of cylinders in free-stream cross-flow forced convection,” Int. J. Heat Mass Transf., vol. 39, no. 2, pp. 311–317, 1996. DOI: 10.1016/0017-9310(95)00122-P.
   Web of Science ®Google Scholar
• R. S. Matos, J. V. C. Vargas, T. A. Laursen, and F. E. M. Saboya, “Optimization study and heat transfer comparison of staggered circular and elliptic tubes in forced convection,” Int. J. Heat Mass Transf., vol. 44, no. 20, pp. 3953–3961, 2001. DOI: 10.1016/S0017-9310(01)00006-0.
   Web of Science ®Google Scholar
• R. S. Matos, T. A. Laursen, J. V. C. Vargas, and A. Bejan, “Three dimensional optimization of staggered finned circular and elliptic tubes in forced convection,” Int. J. Therm. Sci., vol. 43, no. 5, pp. 477–487, 2004. DOI: 10.1016/j.ijthermalsci.2003.10.003.
   Web of Science ®Google Scholar
• P. Ranut, G. Janiga, E. Nobile, and D. Thévenin, “Multi-objective shape optimization of a tube bundle in cross-flow,” Int. J. Heat Mass Transf., vol. 68, pp. 585–598, Jan. 2014. DOI: 10.1016/j.ijheatmasstransfer.2013.09.062.
   Web of Science ®Google Scholar
• Modefrontier User Manual, Release 5.0, ESTECO SpA, June 2017.
   Google Scholar
• N. E. Gharbi, A. Kheiri, M. E. Ganaoui and R. Blanchard, “Numerical optimization of heat exchangers with circular and non-circular shapes,” Case Stud. Therm. Eng., vol. 6, pp. 194–203, Sep. 2015. DOI: 10.1016/j.csite.2015.09.006.
   Web of Science ®Google Scholar
• M. D. Damavandi, M. Forouzanmehr, and H. Safikhani, “Modeling and Pareto based multi-objective optimization of wavy fin-and-elliptical tube heat exchangers using CFD and NSGA-II algorithm,” Appl. Therm. Eng., vol. 111, pp. 325–339, Jan. 2017. DOI: 10.1016/j.applthermaleng.2016.09.120.
   Web of Science ®Google Scholar
• Ansys Fluent User’s Guide, ANSYS Inc., Jan. 2017.
   Google Scholar
• S. E. Sayed Ahmed, E. Z. Ibrahiem, O. M. Mesalhy, and M. A. Abdelatief, “Heat transfer characteristics of staggered wing-shaped tubes bundle at different angles of attack,” Heat Mass Transf., vol. 50, no. 8, pp. 1091–1102, 2014. DOI: 10.1007/s00231-014-1323-3.
   Web of Science ®Google Scholar
• X. Wu, P. Yuan, Z. Luo, L. Wang, and Y. Lu, “Heat transfer and thermal resistance characteristics of fin with built-in interrupted delta winglet type,” Heat Transf. Eng., vol. 37, no. 2, pp. 172–182, 2016. DOI: 10.1080/01457632.2015.1044397.
   Web of Science ®Google Scholar
• V. S. Gullapalli and B. Sundén, “CFD simulation of heat transfer and pressure drop in compact brazed plate heat exchangers,” Heat Transf. Eng., vol. 35, no. 4, pp. 358–366, 2014. DOI: 10.1080/01457632.2013.828557.
   Web of Science ®Google Scholar
• M. Erguvan and D. W. MacPhee, “Second law optimization of heat exchangers in waste heat recovery,” Int. J. Energy Res., vol. 43, no. 11, pp. 5714–5734, 2019. DOI: 10.1002/er.4664.
   Web of Science ®Google Scholar
• L. Li, X. Du, Y. Zhang, L. Yang, and Y. Yang, “Numerical simulation on flow and heat transfer of fin-and-tube heat exchanger with longitudinal vortex generators,” Int. J. Therm. Sci., vol. 92, pp. 85–96, Jun. 2015. DOI: 10.1016/j.ijthermalsci.2015.01.030.
   Web of Science ®Google Scholar
• S. V. Patankar, C. H. Liu, and E. M. Sparrow, “Fully developed flow and heat transfer in ducts having streamwise periodic variation of cross-sectional area,” J. Heat Transf., vol. 99, no. 2, pp. 180–186, 1977. DOI: 10.1115/1.3450666.
   Web of Science ®Google Scholar
• E. Martinez-Espinosa, W. Vicente, M. Salinas-Vazquez, and I. Carvajal-Mariscal, “Numerical analysis of turbulent flow in a small helically segmented finned tube bank,” Heat Transf. Eng., vol. 38, no. 1, pp. 47–62, 2017. DOI: 10.1080/01457632.2016.1156396.
   Web of Science ®Google Scholar
• V. B. Grannis and E. M. Sparrow, “Numerical simulation of fluid flow through an array of diamond-shaped pin fins,” Numer. Heat Transf. Part A, vol. 19, pp. 381–403, Jul. 1990. DOI: 10.1080/10407789108944856.
   Google Scholar
• S. B. Beale and D. B. Spalding, “Numerical study of fluid flow and heat transfer in tube banks with stream-wise periodic boundary conditions,” Trans. CSME, vol. 22, no. 4A, pp. 397–416, 1998. DOI: 10.1139/tcsme-1998-0022.
   Web of Science ®Google Scholar
• M. Faghri and N. Rao, “Numerical computation of flow and heat transfer in finned and unfinned tube banks,” Int. J. Heat Mass Transf., vol. 30, no. 2, pp. 363–372, 1987. DOI: 10.1016/0017-9310(87)90124-4.
   Web of Science ®Google Scholar