References
- S. Ray, et al., “Numerical and experimental investigation of heat transfer augmentation potential of wire-loop structures,” Int. J. Thermal Sci, vol. 90, pp. 370–384, 2015., Apr. DOI: https://doi.org/10.1016/j.ijthermalsci.2014.12.008.
- S. S. Pawar and V. K. Sunnapwar, “Experimental and CFD investigation of convective heat transfer in helically coiled tube heat exchanger,” J. Chem. Eng. Res. Des., vol. 92, no. 11, pp. 2294–2312, 2014. DOI: https://doi.org/10.1016/j.cherd.2014.01.016.
- X. Tang, X. Dai and D. Zhu, “Numerical investigation of convective heat transfer and fluid flow in twisted spiral tube,” Int. J. Heat Mass Transfer, vol. 90, pp. 523–541, Nov. 2015. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2015.06.068.
- J. M. Gorman, K. R. Krautbauer and E. M. Sparrow, “Thermal and fluid flow first-principles numerical design of an enhanced double pipe heat exchanger,” J. Appl. Thermal Eng., vol. 107, pp. 194–206, Aug. 2016. DOI: https://doi.org/10.1016/j.applthermaleng.2016.06.134.
- J. R. Stark, N. Sharifi, T. L. Bergman and A. Faghri, “An experimentally verified numerical model of finned heat pipes in crossflow,” Int. J. Heat Mass Transfer, vol. 97, pp. 45–55, Jun. 2016. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.01.051.
- C. Vashistha, A. K. Patil and M. Kumar, “Experimental investigation of heat transfer and pressure drop in a circular tube with multiple inserts,” J. Appl. Thermal Eng., vol. 96, pp. 117–129, 2016. Mar. DOI: https://doi.org/10.1016/j.applthermaleng.2015.11.077.
- B. Adrian and D. Allan, Heat Transfer Handbook, vol. 1. Hoboken, NJ, USA: John Wiley & Sons, 2003.
- R. Andrzejczyk, T. Muszynski and P. Kozak, “Experimental and computational fluid dynamics studies on straight and U-bend double tube heat exchangers with active and passive enhancement methods,” J. Heat Transfer Eng, vol. 42, no. 3-4, pp. 1–14. 2021. (in press). DOI: https://doi.org/10.1080/01457632.2019.1699279.
- H. Bas and V. Ozceyhan, “Heat transfer enhancement in a tube with twisted tape inserts placed separately from the tube wall,” J. Exp. Thermal Fluid Sci., vol. 41, pp. 51–58, Sep. 2012. DOI: https://doi.org/10.1016/j.expthermflusci.2012.03.008.
- A. Savekar, D. Jangid, M. Gurjar, V. Patil, and C. Sewatkar, “Analysis of heat transfer in pipe with twisted tape inserts 2nd Int. Conf. on Fluid Flow, Heat and Mass Transfer, Ottawa, Canada, Apr. 30, 2015.
- J. Arsha, B. Ramakumar, P. Tayal and K. Padmanabhan, “Numerical investigations on flow and heat transfer characteristics of a tube equipped with twisted tape inserts,” Int. Conf. on Energy Eff. Tech. for Sustainability (ICEETS), India, Apr. 10, 2013.
- S. Salman, A. Kadhum, M. Takriff and A. Mohamad, “Numerical investigation of heat transfer and friction factor characteristics in a circular tube fitted with V-cut twisted tape inserts,” ScientificWorldJournal, vol. 2013, pp. 492762–492768, Sep. 2013. DOI: https://doi.org/10.1155/2013/492762.
- S. Hossain, U. Kumar and K. Rahman, “The enhancement of heat transfer in a circular tube with insert and without insert by using the finite element method,” Proc. Eng., vol. 105, pp. 81–88, Jun. 2015. DOI: https://doi.org/10.1016/j.proeng.2015.05.010.
- J. A. Meng, X. G. Liang and Z. X. Li, “Field synergy optimization and enhanced heat transfer by multi-longitudinal vortexes flow in tube,” Int. J. Heat Mass Transfer, vol. 48, no. 16, pp. 3331–3337, 2005. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2005.02.035.
- M. K. Bhuiya, A. M. Sayem, M. T. Islam, M. U. Chowdhury and M. Shahabuddin, “Performance assessment in a heat exchanger tube fitted with double counter twisted tape inserts,” Int. Comm. Heat Mass Transfer, vol. 50, pp. 25–33, 2014. Jan. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2013.11.005.
- P. Promvonge, “Thermal augmentation in circular tube with twisted tape and wire coil tabulators,” J. Energy Convers. manag., vol. 49, no. 11, pp. 2949–2955, 2008. DOI: https://doi.org/10.1016/j.enconman.2008.06.022.
- X. Zhang, Z. Liu and W. Liu, “Numerical studies on heat transfer and flow characteristics for laminar flow in a tube with multiple regularly spaced twisted tapes,” Int. J. Thermal Sci., vol. 58, pp. 157–167, Aug. 2012. DOI: https://doi.org/10.1016/j.ijthermalsci.2012.02.025.
- X. Zhang, Z. Liu and W. Liu, “Numerical studies on heat transfer and friction factor characteristics of a tube fitted with helical screw-tape without core-rod inserts,” Int. J. Heat Mass Transfer, vol. 60, pp. 490–498, May 2013. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2013.01.041.
- H. Jia, Z. C. Liu, W. Liu and A. Nakayama, “Convective heat transfer optimization based on minimum entransy dissipation in the circular tube,” Int. J. Heat Mass Transfer, vol. 73, pp. 124–129, Jun. 2014. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2014.02.005.
- P. Li, Z. Liu, W. Liu and G. Chen, “Numerical study on heat transfer enhancement characteristics of tube inserted with centrally hollow narrow twisted tapes,” Int. J. Heat Mass Transfer, vol. 88, pp. 481–491, Sep. 2015. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2015.04.103.
- V. Singh, S. Chamoli, M. Kumar and A. Kumar, “Heat transfer and fluid flow characteristics of heat exchanger tube with multiple twisted tapes and solid rings inserts,” J. Chem. Eng. Proc., vol. 102, pp. 156–168, Apr. 2016. DOI: https://doi.org/10.1016/j.cep.2016.01.013.
- S. Eiamsa-Ard, C. Thianpong and P. Eiamsa-Ard, “Turbulent heat transfer enhancement by counter/co-swirling flow in a tube fitted with twin twisted tapes,” J. Exp. Thermal Fluid Sci., vol. 34, no. 1, pp. 53–62, 2010. DOI: https://doi.org/10.1016/j.expthermflusci.2009.09.002.
- M. K. Bhuiya, M. U. Chowdhury, M. Saha and M. T. Islam, “Heat transfer and friction factor characteristics in turbulent flow through a tube fitted with perforated twisted tape inserts,” Int. Comm. Heat Mass Transfer, vol. 46, pp. 49–57, 2013. Aug. 2013. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2013.05.012.
- K. Nanan, C. Thianpong, P. Promvonge and S. Eiamsa-Ard, “Investigation of heat transfer enhancement by perforated helical twisted-tapes,” Int. Comm. Heat Mass Transfer, vol. 52, pp. 106–112, 2014. Mar. 2014. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2014.01.018.
- M. M. K. Bhuiya, et al., “Performance of turbulent flow heat transfer through a tube with perforated strip inserts,” J. Heat Transfer Eng., vol. 35, no. 1, pp. 43–52, 2014. DOI: https://doi.org/10.1080/01457632.2013.810449.
- S. Pokhriyal, A. K. Patil and M. Kumar, “Thermo-hydraulic performance of a circular tube with perforated and slotted conical ring inserts,” J. Heat Transfer Eng., vol. 39, no. 17-18, pp. 1562–1572, 2018. DOI: https://doi.org/10.1080/01457632.2017.1369846.
- A. Kumar, S. Singh, S. Chamoli and M. Kumar, “Experimental investigation on thermo-hydraulic performance of heat exchanger tube with solid and perforated circular disk along with twisted tape insert,” J. Heat Transfer Eng., vol. 40, no. 8, pp. 616–626, 2019. DOI: https://doi.org/10.1080/01457632.2018.1436618.
- M. Khoshvaght-Aliabadi, F. Hormozi and A. Zamzamian, “Role of channel shape on performance of plate-fin heat exchangers: Experimental assessment,” Int. J. Thermal Sci., vol. 79, pp. 183–193, May 2014. DOI: https://doi.org/10.1016/j.ijthermalsci.2014.01.004.
- İ. Kurtbaş, A. Durmuş, H. Eren and E. Turgut, “Effect of propeller type swirl generators on the entropy generation and efficiency of heat exchangers,” Int. J. Thermal Sci., vol. 46, no. 3, pp. 300–307, 2007. DOI: https://doi.org/10.1016/j.ijthermalsci.2006.06.003.
- C. Habchi, et al., “Enhancing heat transfer in vortex generator-type multifunctional heat exchangers,” J. Appl. Thermal Eng., vol. 38, pp. 14–25, May 2012. DOI: https://doi.org/10.1016/j.applthermaleng.2012.01.020.
- P. W. Deshmukh and R. P. Vedula, “Heat transfer and friction factor characteristics of turbulent flow through a circular tube fitted with vortex generator inserts,” Int. J. Heat Mass Transfer, vol. 79, pp. 551–560, Dec. 2014. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2014.08.042.
- P. W. Deshmukh, S. V. Prabhu and R. P. Vedula, “Heat transfer enhancement for laminar flow in tubes using curved delta wing vortex generator inserts,” J. Appl. Thermal Eng., vol. 106, pp. 1415–1426, Aug. 2016. DOI: https://doi.org/10.1016/j.applthermaleng.2016.06.120.
- N. Zheng, P. Liu, F. Shan, Z. Liu and W. Liu, “Sensitivity analysis and multi-objective optimization of a heat exchanger tube with conical strip vortex generator,” J. Appl. Thermal Eng., vol. 122, pp. 642–652, Jul. 2017. DOI: https://doi.org/10.1016/j.applthermaleng.2017.05.046.
- S. Chamoli, R. Lu and P. Yu, “Thermal characteristic of a turbulent flow through a circular tube fitted with perforated vortex generator inserts,” J. Appl. Thermal Eng., vol. 121, pp. 1117–1134, Jul. 2017. DOI: https://doi.org/10.1016/j.applthermaleng.2017.03.145.
- Y. Wang, P. Liu, F. Shan, Z. Liu and W. Liu, “Effect of longitudinal vortex generator on the heat transfer enhancement of a circular tube,” J. Appl. Thermal Eng., vol. 148, pp. 1018–1028, 2019. Feb. DOI: https://doi.org/10.1016/j.applthermaleng.2018.11.080.
- W. Chingtuaythong, P. Promvonge, C. Thianpong and M. Pimsarn, “Heat transfer characterization in a tubular heat exchanger with V-shaped rings,” J. Appl. Thermal Eng., vol. 110, pp. 1164–1171, 2017. Jan. DOI: https://doi.org/10.1016/j.applthermaleng.2016.09.020.
- A. Nurizki, M. Islam, and and M. Alam, “Experimental study of thermal performance and flow behaviour with winglets vortex generators in a circular tube,” 8th Joint Fluids Engineering Conference, San Francisco, California, USA, Jul. 28 – Aug. 1, 2019. DOI: https://doi.org/10.1115/AJKFluids2019-4723.
- Y. Xu, M. Islam and N. Kharoua, “Numerical study of winglets vortex generator effects on thermal performance in a circular pipe,” Int. J. Thermal Sci., vol. 112, pp. 304–317, Feb. 2017. DOI: https://doi.org/10.1016/j.ijthermalsci.2016.10.015.
- Y. Xu, M. Islam and N. Kharoua, “Experimental study of thermal performance and flow behaviour with winglet vortex generators in a circular tube,” J. Appl. Thermal Eng., vol. 135, pp. 257–268, May 2018. DOI: https://doi.org/10.1016/j.applthermaleng.2018.01.112.
- Z. Sun, K. Zhang, W. Li, Q. Chen and N. Zheng, “Investigations of the turbulent thermal-hydraulic performance in circular heat exchanger tubes with multiple rectangular winglet vortex generators,” J. Appl. Thermal Eng., vol. 168, pp. 1–13, Mar. 2020. DOI: https://doi.org/10.1016/j.applthermaleng.2019.114838.
- A. Wijayanta, T. Istanto, K. Kariya and A. Miyara, “Heat transfer enhancement of internal flow by inserting punched delta winglet vortex generators with various attack angles,” J. Exp. Thermal Fluid Sci., vol. 87, pp. 141–148, Oct. 2017. DOI: https://doi.org/10.1016/j.expthermflusci.2017.05.002.
- H. Liu, H. Li, Y. He and Z. Chen, “Heat transfer and flow characteristics in a circular tube fitted with rectangular winglet vortex generators,” Int. J. Heat Mass Transfer, vol. 126, pp. 989–1006, Nov. 2018. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2018.05.038.
- M. E. Nakhchi, J. A. Esfahani and K. C. Kim, “Numerical study of turbulent flow inside heat exchangers using perforated louvered strip inserts,” Int. J. Heat Mass Transfer, vol. 148, pp. 1–10, Feb 2020. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.119143.
- A. Mahfouz, W. Abdelmaksoud and E. Khalil, “Heat transfer and fluid flow characteristics in a heat exchanger tube fitted with inserts,” J. Thermal Sci. Eng. Appl., vol. 10, no. 3, pp. 1–12, 2018. DOI: https://doi.org/10.1115/1.4038707.
- ANSYS Inc. “ANSYS fluent 2013 theory guide 15” Southpointe 275 Technology Drive Canonsburg, PA, USA, 2013.
- A. Gerasimov, Modeling Turbulent Flows with FLUENT, Canonsburg, PA, USA: ANSYS Inc., 2006
- B. Blocken, T. Stathopoulos and J. Carmeliet, “CFD simulation of the atmospheric boundary layer: Wall function problems,” J. Atmos. Environ., vol. 41, no. 2, pp. 238–252, 2007. DOI: https://doi.org/10.1016/j.atmosenv.2006.08.019.