References
- J. Banhart, “Manufacture, characterization and application of cellular metals and metal foams,” Prog. Mater. Sci., vol. 46, no. 6, pp. 559–632, 2001. DOI: https://doi.org/10.1016/S0079-6425(00)00002-5.
- M. Ӧzdemir and A. F. Ӧzgüc, “Forced convective heat transfer in porous medium of wire screen meshes,” Heat Mass Transf., vol. 33, no. 1–2, pp. 129–136, 1997. DOI: https://doi.org/10.1007/s002310050169.
- K. Muralidhar and K. Suzuki, “Analysis of flow and heat transfer in a regenerator mesh using a non-Darcy thermally non-equilibrium model,” Int. J. Heat Mass Transf., vol. 44, no. 13, pp. 2493–2504, 2001. DOI: https://doi.org/10.1016/S0017-9310(00)00285-4.
- C. Li and G. P. Peterson, “The effective thermal conductivity of wire screen,” Int. J. Heat Mass Transf., vol. 49, no. 21–22, pp. 4095–4105, 2006. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2006.03.031.
- J. Xu, J. Tian, T. J. Lu, and H. P. Hodson, “On the thermal performance of wire-screen meshes as heat exchanger material,” Int. J. Heat Mass Transf., vol. 50, no. 5-6, pp. 1141–1154, 2007. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2006.05.044.
- A. Valli, J. Hyväluoma, A. Jäsberg, A. Koponen, and J. Timonen, “Pressure drop for low Reynolds number flows through regular and random screens,” Transp. Porous Med., vol. 80, no. 2, pp. 193–208, Feb. 2009. DOI: https://doi.org/10.1007/s11242-009-9350-0.
- R. Dyga and M. Placzek, “Efficiency of heat transfer in heat exchangers with wire mesh packing,” Int. J. Heat Mass Transf., vol. 53, no. 23–24, pp. 5499–5508, 2010. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2010.07.007.
- Z. Zhao, Y. Peles, and K. Jensen, “Properties of plain weave metallic wire mesh screens,” Int. J. Heat Mass Transf., vol. 57, no. 2, pp. 690–697, 2013. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2012.10.055.
- P. Pradhan, P. C. Mishra, and B. B. Samantaray, “Performance and emission analysis of a novel porous radiant burner for domestic cooking application,” Heat Transf. Eng., vol. 39, no. 9, pp. 784– 793, 2018. DOI: https://doi.org/10.1080/01457632.2017.1341231.
- J. Ma, P. Lv, X. Luo, Y. Liu, H. Li, and J. Wen, “Experimental investigation of flow and heat transfer characteristics in double-laminated sintered woven wire mesh,” Appl. Therm. Eng., vol. 95, pp. 53–61, Feb. 2016. DOI: https://doi.org/10.1016/j.applthermaleng.2015.11.015.
- R. Kurian, C. Balaji, and S. P. Venkateshan, “Experimental investigation of convective heat transfer in a vertical channel with brass wire mesh blocks,” Int. J. Thermal Sci., vol. 99, pp. 170–179, Jan. 2016. DOI: https://doi.org/10.1016/j.ijthermalsci.2015.08.002.
- J. Tian et al., “The effects of topology upon fluid flow and heat transfer within cellular copper structures,” Int. J. Heat Mass Transfer, vol. 47, no. 14–16, pp. 3171–3186, 2004. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2004.02.010.
- C. Wang, M. Mobedi, F. Kuwahara, and A. Nakayama, “A numerical study on acceleration of melting process under forced convection by using high thermal conductive porous media,” Heat Transf. Eng., vol. 41, no. 8, pp. 723–738, 2020. DOI: https://doi.org/10.1080/01457632.2018.1564204.
- G. Venugopal, C. Balaji, and S. P. Venkateshan, “Experimental study of mixed convection heat transfer in a vertical duct filled with metallic porous structures,” Int. J. Therm. Sci., vol. 49, no. 2, pp. 340–348, 2010. DOI: https://doi.org/10.1016/j.ijthermalsci.2009.07.018.
- W. Tu, Y. Wang, Y. Tang, and J. Xu, “Heat transfer and pressure drop characteristics in a circular tube with mesh cylinder inserts,” Int. Commun. Heat Mass Transf., vol. 75, pp. 130–136, Jul. 2016. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2016.04.013.
- Y. Fu, J. Wen, and C. Zhang, “An experimental investigation on heat transfer enhancement of sprayed wire-mesh heat exchangers,” Int. J. Heat Mass Transf., vol. 112, pp. 699–708, Sept. 2017. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.05.026.
- S. Huang, Z. Wan, Q. Wang, Y. Tang, and X. Yang, “Thermo-hydraulix characteristics of laminar flow in a circular tube with porous metal cylinder inserts,” Appl. Therm. Eng., vol. 120, pp. 49–63, Jun. 2017. DOI: https://doi.org/10.1016/j.applthermaleng.2017.03.117.
- W. Lin, G. Xie, J. Yuan, and B. Sundén, “Comparison and analysis of heat transfer in aluminum foam using local thermal equilibrium or non-equilibrium model,” Heat Transf. Eng., vol. 37, no. 3–4, pp. 314–322, 2016. DOI: https://doi.org/10.1080/01457632.2015.1052682.
- X. Han et al., “A review of metal foam and metal matrix composites for heat exchangers and heat sinks,” Heat Transf. Eng., vol. 33, no. 12, pp. 991–1009, 2012. DOI: https://doi.org/10.1080/01457632.2012.659613.
- H. J. Xu, Z. G. Qu, T. J. Lu, Y. L. He, and W. Q. Tao, “Thermal modeling of forced convection in a parallel-plate channel partially filled with metallic foams,” ASME J. Heat Transf., vol. 133, no. 9, pp. 1–9, 2011. DOI: https://doi.org/10.1115/1.4004209.
- M. Hajipour and A. M. Dehkordi, “Analysis of nanofluid heat transfer in parallel plate vertical channels partially filled with porous medium,” Int. J. Therm. Sci., vol. 55, pp. 103–113, May 2012. DOI: https://doi.org/10.1016/j.ijthermalsci.2011.12.018.
- V. Calmidi and R. Mahajan, “Forced convection in high porosity metal foams,” ASME J. Heat Transf., vol. 122, no. 3, pp. 557–565, 2000. DOI: https://doi.org/10.1115/1.1287793.
- A. Tamayol and K. Hooman, “Thermal assessment of forced convection through metal foam heat exchangers”, ASME J. Heat Transf., vol. 133, no. 11, p. 11801, 2011. DOI: https://doi.org/10.1115/1.4004530.
- S. Y. Kim, J. W. Paek, and B. H. Kang, “Flow and heat transfer correlations for porous fin in a plate-fin heat exchanger,” J. Heat Transf., vol. 122, no. 3, pp. 572–578, 2000. DOI: https://doi.org/10.1115/1.1287170.
- S. Y. Kim, B. H. Kang, and J. H. Kim, “Forced convection from aluminum foam materials in an asymmetrically heated channel,” Int. J. Heat Mass Transf., vol. 44, no. 7, pp. 1451–1454, 2001. DOI: https://doi.org/10.1016/S0017-9310(00)00187-3.
- P. M. Kamath, C. Balaji, and S. P. Venkateshan, “Convection heat transfer from aluminum and copper foams in a vertical channel – An experimental study,” Int. J. Therm. Sci., vol. 64, pp. 1–10, Feb. 2013. DOI: https://doi.org/10.1016/j.ijthermalsci.2012.08.015.
- W. Lu, T. Zhang, and M. Yang, “Analytical solution of forced convection heat transfer in parallel-plate channel partially filled with metallic foams,” Int. J. Heat Mass Transf., vol. 100, pp. 718–727, Sept. 2016. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.04.047.
- W. Lu, T. Zhang, M. Yang, and Y. Wu, “Analytical solutions of force convective heat transfer in plate heat exchangers partially filled with metal foams,” Int. J. Heat Mass Transfer, vol. 110, pp. 476–481, Jul. 2017. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.02.087.
- J. Joseph, R. Nacereddine, M. Delanaye, J. G. Korvink, and J. J. Brandner, “Advanced numerical methodology to analyze high-temperature wire-net compact heat exchangers for a micro-combined heat and power system application,” Heat Transf. Eng., vol. 41, no. 11, pp. 934–946, 2020. DOI: https://doi.org/10.1080/01457632.2019.1589984.
- B. Kotresha and N. Gnanasekaran, “Determination of interfacial heat transfer coefficient for the flow assisted mixed convection through brass wire mesh,” Int. J. Therm. Sci., vol. 138, pp. 98–108, Apr. 2019. DOI: https://doi.org/10.1016/j.ijthermalsci.2018.12.043.
- ANSYS Fluent, 2017. Available: http://www.ansys.com/Products/Fluids/ANSYS-Fluent.
- D. K. Walters and D. Coklja, “A three-equation eddy viscosity model for Reynolds-averaged Navier-stokes simulations of transitional flows”, J. Fluids Eng., vol. 130, no. 12, p. 121401, 2008. DOI: https://doi.org/10.1115/1.2979230.
- D. A. Nield and A. Bejan, Convection in Porous Media, 3rd ed. Berlin: Springer, 2005.
- D. Nield, “Estimation of the stagnant thermal conductivity of saturated porous media,” Int. J. Heat Mass Transf., vol. 34, no. 6, pp. 1575–1576, 1991. DOI: DOI: https://doi.org/10.1016/0017-9310(91)90300-4.
- R. M. Manglik, Heat Transfer Enhancement, Heat Transfer Handbook, A. Bejan and A. Kraus, Hoboken, NJ: Wiley, 2003, pp. 1029–1130.