References
- E. L. Paul, V. A. Atiemo-Obeng, and S. M. Kresta, Handbook of Industrial Mixing: Science and Practice. Hoboken, NJ: Wiley-Interscience, 2004,
- A. V. Shenoy, Heat Transfer to Non-Newtonian Fluids: Fundamentals and Analytical Expressions. Weinheim: Wiley-VCH, 2018,
- R. B. Bird, G. Dai and B. J. Yarusso, “The rheology and flow of viscoplastic materials,” Rev. Chem. Eng., vol. 1, no. 1, pp. 1–70, 1983. DOI: https://doi.org/10.1515/revce-1983-0102.
- P. Coussot, “Yield stress fluid flows: a review of experimental data,” J. Non-Newton. Fluid Mech, vol. 211, pp. 31–49, 2014. Sep. DOI: https://doi.org/10.1016/j.jnnfm.2014.05.006.
- V. S. Thumati, S. Patel, A. K. Gupta and R. P. Chhabra, “Effect of confinement and fluid yield stress on heat transfer from an isothermal sphere,” J. Chem. Eng. Jpn., vol. 51, no. 11, pp. 899–908, 2018. DOI: https://doi.org/10.1252/jcej.16we382.
- P. K. Das, A. K. Gupta, N. Nirmalkar and R. P. Chhabra, “Effect of confinement on forced convection from a heated sphere in Bingham plastic fluids,” Korea-Aust. Rheol. J., vol. 27, no. 2, pp. 75–94, 2015. DOI: https://doi.org/10.1007/s13367-015-0009-9.
- A. K. Baranwal and R. P. Chhabra, “Effect of fluid yield stress on natural convection from horizontal cylinders in a square enclosure,” Heat Transf. Eng., vol. 38, no. 6, pp. 557–577, 2017. DOI: https://doi.org/10.1080/01457632.2016.1200373.
- A. K. Baranwal and R. P. Chhabra, “Effect of fluid yield stress on free convection from an isothermal cylinder adjacent to an adiabatic wall,” Comput. Therm. Sci., vol. 9, no. 6, pp. 483–511, 2017. DOI: https://doi.org/10.1615/ComputThermalScien.2017019198.
- L. Mishra, A. K. Baranwal and R. P. Chhabra, “Laminar forced convection in power-law fluids from two heated cylinders in a square duct,” Int. J. Heat Mass Transf., vol. 113, pp. 589–612, 2017. Oct. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.05.117.
- G. Mishra, S. A. Patel and R. P. Chhabra, “Pulsatile flow of power-law fluids over a sphere: Momentum and heat transfer characteristics,” Powder Technol., vol. 360, pp. 789–817, 2020. Jan. DOI: https://doi.org/10.1016/j.powtec.2019.10.055.
- S. Gupta, S. A. Patel and R. P. Chhabra, “Pulsatile flow of power-law fluids over a heated cylinder: Flow and heat transfer characteristics,” Int. J. Therm. Sci., vol. 152, 106330, Jun 2020. DOI: https://doi.org/10.1016/j.ijthermalsci.2020.106330.
- N. Phan-Thien and J. Dudek, “Pulsating flow of a plastic fluid,” Nature, vol. 296, no. 5860, pp. 843–844, 1982. DOI: https://doi.org/10.1038/296843a0.
- T. Kajiuchi and A. Saito, “Flow enhancement of laminar pulsating flow of Bingham plastic fluids,” J. Chem. Eng. Japan / JCEJ, vol. 17, no. 1, pp. 34–38, 1984. DOI: https://doi.org/10.1252/jcej.17.34.
- O. A. E. Masry and K. E. Shobaky, “Pulsating slurry flow in pipelines,” Exp. Fluids, vol. 7, no. 7, pp. 481–486, 1989. DOI: https://doi.org/10.1007/BF00187066.
- T. C. Papanastasiou, “Flows of materials with yield,” J. Rheol., vol. 31, no. 5, pp. 385–404, 1987. DOI: https://doi.org/10.1122/1.549926.
- E. J. O'Donovan and R. I. Tanner, “Numerical study of the Bingham squeeze film problem,” J. Non-Newton. Fluid Mech., vol. 15, no. 1, pp. 75–83, 1984. DOI: https://doi.org/10.1016/0377-0257(84)80029-4.
- M. Bercovier and M. Engelman, “A finite-element method for incompressible non-Newtonian flows,” J. Comput. Phys., vol. 36, no. 3, pp. 313–326, 1980. DOI: https://doi.org/10.1016/0021-9991(80)90163-1.
- R. Glowinski and A. Wachs, “On the numerical simulation of viscoplastic fluid flow,” in Numerical Methods for Non-Newtonian Fluids, in Handbook of Numerical Analysis, vol. 16, R. Glowinski and J. Xu, Eds. Amsterdam, the Netherlands: Elsevier, 2011, pp. 483–717. DOI: https://doi.org/10.1016/B978-0-444-53047-9.00006-X.
- E. Mitsoulis, “Flows of viscoplastic materials: Models and computations,” in Rheology Reviews, D. M. Binding, N. E. Hudson, and R. Keunings, Eds. Aberystwyth, Great Britain: British society of Rheology, 2007, pp. 135–178. DOI: 10.1.1.361.6308.
- E. Mitsoulis and J. Tsamopoulos, “Numerical simulations of complex yield-stress fluid flows,” Rheol. Acta, vol. 56, no. 3, pp. 231–258, 2017. Jan DOI: https://doi.org/10.1007/s00397-016-0981-0.
- I. Frigaard and C. Nouar, “On the usage of viscosity regularisation methods for visco-plastic fluid flow computations,” J. Non-Newton. Fluid Mech., vol. 127, no. 1, pp. 1–26, 2005. DOI: https://doi.org/10.1016/j.jnnfm.2005.01.003.
- P. Saramito, “A damped Newton algorithm for computing viscoplastic fluid flows,” J. Non-Newton. Fluid Mech., vol. 238, pp. 6–15, 2016. Dec. DOI: https://doi.org/10.1016/j.jnnfm.2016.05.007
- Y. Dimakopoulos, G. Makrigiorgos, G. Georgiou and J. Tsamopoulos, “The PAL (Penalized Augmented Lagrangian) method for computing viscoplastic flows: A new fast converging scheme,” J. Non-Newton. Fluid Mech., vol. 256, pp. 23–41, Jun 2018. DOI: https://doi.org/10.1016/j.jnnfm.2018.03.009.
- A. Syrakos, G. C. Georgiou and A. N. Alexandrou, “Solution of the square lid-driven cavity flow of a Bingham plastic using the finite volume method,” J. Non-Newton. Fluid Mech., vol. 195, pp. 19–31, May 2013. DOI: https://doi.org/10.1016/j.jnnfm.2012.12.008.
- Y. Dimakopoulos, M. Pavlidis and J. Tsamopoulos, “Steady bubble rise in Herschel–Bulkley fluids and comparison of predictions via the Augmented Lagrangian Method with those via the Papanastasiou model,” J. Non-Newton. Fluid Mech., vol. 200, pp. 34–51, 2013. Oct. DOI: https://doi.org/10.1016/j.jnnfm.2012.10.012.
- C. W. Macosko, Rheology: Principles, Measurements, and Applications. Weinheim: Wiley-VCH, 1994,
- P. J. Roache, Verification and Validation in Computational Science and Engineering, Albuquerque, NM: Hermosa, 1998,
- P. Neofytou, “A 3rd order upwind finite volume method for generalized Newtonian fluid flows,” Adv. Eng. Softw., vol. 36, no. 10, pp. 664–680, 2005. DOI: https://doi.org/10.1016/j.advengsoft.2005.03.011.
- N. Nirmalkar and R. P. Chhabra, “Momentum and heat transfer from a heated circular cylinder in Bingham plastic fluids,” Int. J. Heat Mass Transf., vol. 70, pp. 564–577, 2014. Mar. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2013.11.034.
- S. A. Patel and R. P. Chhabra, “Heat transfer in Bingham plastic fluids from a heated elliptical cylinder,” Int. J. Heat Mass Transf., vol. 73, pp. 671–692, 2014. Jun. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2014.02.024.
- R. L. Thompson and E. J. Soares, “Viscoplastic dimensionless numbers,” J. Non-Newton. Fluid Mech., vol. 238, pp. 57–64, Dec. 2016. DOI: https://doi.org/10.1016/j.jnnfm.2016.05.001.