References
- M. M. Ahmadpour, M. A. Akhavan-Behabadi, B. Sajadi and A. Salehi-Kohestani, “Experimental study of lubricating oil effect on R600a condensation inside micro-fin tubes,” Heat Transfer Eng., vol. 42, no. 9, 2021 (in press). DOI: https://doi.org/10.1080/01457632.2020.1735780.
- M. M. Ahmadpour, M. A. Akhavan-Behabadi, B. Sajadi and A. Salehi-Kohestani, “Effect of lubricating oil on condensation characteristics of R600a inside a horizontal U-shaped tube: experimental study,” Int. J. Therm. Sci., vol. 145, p. 106007, Nov. 2019. DOI: https://doi.org/10.1016/j.ijthermalsci.2019.106007.
- X. Chen, et al., “Correlation of evaporation heat transfer inside 8.8 mm and 7.14 mm horizontal round micro-fin tubes,” Heat Transfer Eng., vol. 40, no. 3-4, pp. 320–329, Feb. 2019. DOI: https://doi.org/10.1080/01457632.2018.1429054.
- M. M. Ahmadpour and M. A. Akhavan-Behabadi, “Experimental investigation of heat transfer during flow condensation of HC-R600a based nano-refrigerant inside a horizontal U-shaped tube,” Int. J. Therm. Sci., vol. 146, p. 106110, Dec. 2019. : DOI: https://doi.org/10.1016/j.ijthermalsci.2019.106110.
- M. M. Ahmadpour, M. A. Akhavan-Behabadi, B. Sajadi and A. Salehi-Kohestani, “Experimental study of R600a/oil/MWCNT nano-refrigerant condensing flow inside micro-fin tubes,” Heat Mass Transfer, vol. 56, no. 3, pp. 749–757, March 2020.
- E. P. Bandarra Filho and J. M. S. Jabardo, “Convective boiling performance of refrigerant R-134a in herringbone and microfin copper tubes,” Int. J. Refrig., vol. 29, no. 1, pp. 81–91, Jan. 2006. DOI: https://doi.org/10.1016/j.ijrefrig.2005.05.011.
- M. A. Akhavan-Behabadi, R. Kumar and M. Jamali, “Investigation on heat transfer and pressure drop during swirl flow boiling of R-134a in a horizontal tube,” Int. J. Heat Mass Transfer, vol. 52, no. 7-8, pp. 1918–1927, Mar. 2009. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2008.09.034.
- J. M. S. Jabardo, G. Ribatski and E. Stelute, “Roughness and surface material effects on nucleate boiling heat transfer from cylindrical surfaces to refrigerants R-134a and R-123,” Exp. Therm. Fluid Sci., vol. 33, no. 4, pp. 579–590, Apr. 2009. DOI: https://doi.org/10.1016/j.expthermflusci.2008.12.004.
- M. Nasr, M. A. Akhavan-Behabadi and S. E. Marashi, “The effect of tube flattening on flow boiling heat transfer enhancement,” Heat Transfer Eng., vol. 32, no. 6, pp. 467–475, May 2011. DOI: https://doi.org/10.1080/01457632.2010.506169.
- M. A. Akhavan-Behabadi, S. G. Mohseni and S. M. Razavinasab, “Evaporation heat transfer of R-134a inside a microfin tube with different tube inclinations,” Exp. Therm. Fluid Sci., vol. 35, no. 6, pp. 996–1001, Sep. 2011. DOI: https://doi.org/10.1016/j.expthermflusci.2011.01.020.
- S. Laohalertdecha and S. Wongwises, “An experimental study into the evaporation heat transfer and flow characteristics of R-134a refrigerant flowing through corrugated tubes,” Int. J. Refrig., vol. 34, no. 1, pp. 280–291, Jan. 2011. DOI: https://doi.org/10.1016/j.ijrefrig.2010.07.012.
- M. A. Akhavan-Behabadi and M. Esmailpour, “Experimental study of evaporation heat transfer of R-134a inside a corrugated tube with different tube inclinations,” Int. Commun. Heat Mass Transfer, vol. 55, pp. 8–14, Jul. 2014. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2014.03.003.
- A. Diani, A. Cavallini and L. Rossetto, “R1234yf flow boiling heat transfer inside a 2.4 mm microfin tube,” Heat Transfer Eng., vol. 38, no. 3, pp. 303–312, Feb. 2017. DOI: https://doi.org/10.1080/01457632.2016.1189260.
- A. Diani, S. Mancin and L. Rossetto, “R1234yf vs. R134a flow boiling heat transfer inside a 3.4 mm ID microfin tube,” J. Phys. Conf. Ser., vol. 547, no. 1, p. 012026, Jun. 2014. DOI: https://doi.org/10.1088/1742-6596/547/1/012026.
- S. Mancin, A. Diani and L. Rossetto, “Experimental measurements of R134a flow boiling inside a 3.4-mm ID microfin tube,” Heat Transfer Eng, vol. 36, no. 14-15, pp. 1218–1229, Sep. 2015. DOI: https://doi.org/10.1080/01457632.2015.994938.
- A. Shishkin-Fabio, T. Kanizawa, G. Ribatski, S. Tarasevich and A. Yakovlev, “Experimental investigation of the heat transfer coefficient during convective boiling of R134a in tubes with twisted tape insert,” Int. J. Refrig., vol. 92, pp. 196–207, Aug. 2018. DOI: https://doi.org/10.1016/j.ijrefrig.2018.06.002.
- X. Zhang, J. Zhang, H. Ji and D. Zhao, “Heat transfer enhancement and pressure drop performance for R417A flow boiling in internally grooved tubes,” Energy, vol. 86, pp. 446–454, Jun. 2015. DOI: https://doi.org/10.1016/j.energy.2015.04.054.
- S. Celik and E. C. Nsofor, “Performance analysis of a refrigerating system with a grooved-tube evaporator,” Appl. Therm. Eng., vol. 73, no. 1, pp. 743–748, Dec. 2014. DOI: https://doi.org/10.1016/j.applthermaleng.2014.08.033.
- J. C. Passos and R. F. Reinaldo, “Analysis of pool boiling within smooth and grooved tubes,” Exp. Therm. Fluid Sci., vol. 22, no. 1-2, pp. 35–44, Aug. 2000. DOI: https://doi.org/10.1016/S0894-1777(00)00008-X.
- J. Chen and W. Li, “Local flow boiling heat transfer characteristics in three-dimensional enhanced tubes,” Int. J. Heat Mass Transfer, vol. 121, pp. 1021–1032, Jun. 2018. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2018.01.065.
- Z. Li, S. Liu, J. Zhang and L. Zhang, “Evaporation heat transfer of R134a on outside of smooth and enhanced tubes,” Heat Transfer Eng., vol. 42, no. 9, 2021. (in press). DOI: https://doi.org/10.1080/01457632.2020.1735792.
- R. Schultz and R. Cole, “Uncertainty analysis in boiling nucleation,” AIChE Symp. Ser., vol. 75, no. 189, pp. 32–39, 1979.
- R. Sonntag, C. Borgnakke and G. Van Wylen, Handbook of Fundamentals of Thermodynamics, vol. 6, New York, NY, USA: Wiley, 2003, pp. 708–713.
- J. Collier and J. Thome, Handbook of Convective Boiling and Condensation, 3rd ed., New York, NY, USA: Oxford University Press, 1994, pp. 585–590.
- K. E. Gungor and R. H. Winterton, “A general correlation for flow boiling in tubes and annuli,” Int. J. Heat Mass Transfer, vol. 29, no. 3, pp. 351–358, Mar. 1986. DOI: https://doi.org/10.1016/0017-9310(86)90205-X.
- L. Friedel, “Improved friction pressure drop correlations for horizontal and vertical two-phase pipe flow,” Proc. of European Two-Phase Flow Group Meet., Ispra, Italy, 1979.
- O. E. Turgut, M. Asker and M. T. Coban, “Saturated flow boiling heat transfer correlation for small channels based on R134a experimental data,” Arab J. Sci. Eng., vol. 41, no. 5, pp. 1921–1939, May 2016. DOI: https://doi.org/10.1007/s13369-016-2038-1.
- T. N. Tran, M. C. Chyu, M. W. Wambganss and D. M. France, “Two-phase pressure drop of refrigerants during flow boiling in small channels: an experimental investigation and correlation development,” Int. J. Multiphase Flow, vol. 26, no. 11, pp. 1739–1754, Nov. 2000. DOI: https://doi.org/10.1016/S0301-9322(99)00119-6.
- M. H. Yu, T. K. Lin and C. C. Tseng, “Heat transfer and flow pattern during two-phase flow boiling of R-134a in horizontal smooth and microfin tubes,” Int. J. Refrig., vol. 25, no. 6, pp. 789–798, Sep. 2002. DOI: https://doi.org/10.1016/S0140-7007(01)00075-5.
- M. O. Didi, N. Kattan and J. R. Thome, “Prediction of two-phase pressure gradients of refrigerants in horizontal tubes,” Int. J. Refrig., vol. 25, no. 7, pp. 935–947, Nov. 2002. DOI: https://doi.org/10.1016/S0140-7007(01)00099-8.
- A. Greco, “Convective boiling of pure and mixed refrigerants: an experimental study of the major parameters affecting heat transfer,” Int. J. Heat Mass Transfer, vol. 51, no. 3-4, pp. 896–909, Feb. 2008. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2007.11.002.
- D. Jige and N. Inoue, “Flow boiling heat transfer and pressure drop of R32 inside 2.1 mm, 2.6 mm and 3.1 mm microfin tubes,” Int. J. Heat Mass Transfer, vol. 134, pp. 566–573, May 2019. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.01.027.
- K. Agrawal and H. Varma, “Experimental study of heat transfer augmentation versus pumping power in a horizontal R12 evaporator,” Int. J. Refrig., vol. 14, no. 5, pp. 273–281, Sep. 1991. DOI: https://doi.org/10.1016/0140-7007(91)90042-F.