References
- M. K. Rowinski, T. J. White, and J. Y. Zhao, “Small and medium sized reactors (SMR): a review of technology,” Renew. Sust. Energ. Rev., vol. 44, pp. 643–656, Apr. 2015. DOI: https://doi.org/10.1016/j.rser.2015.01.006.
- K. Shirvan, P. Hejzlar, and M. S. Kazimi, “The design of a compact integral medium size PWR,” Nucl. Eng. Des., vol. 243, pp. 393–403, Feb. 2012. DOI: https://doi.org/10.1016/j.nucengdes.2011.11.023.
- S. K. Mylavarapu, X. Sun, R. N. Christensen, R. R. Unocic, R. E. Glosup, and M. W. Patterson, “Fabrication and design aspects of high-temperature compact diffusion bonded heat exchangers,” Nucl. Eng. Des., vol. 249, pp. 49–56, Aug. 2012. DOI: https://doi.org/10.1016/j.nucengdes.2011.08.043.
- I. H. Kim and H. C. No, “Thermal–hydraulic physical models for a Printed Circuit Heat Exchanger covering He, He–CO2 mixture, and water fluids using experimental data and CFD,” Exp. Therm. Fluid Sci., vol. 48, pp. 213–221, Jul. 2013. DOI: https://doi.org/10.1016/j.expthermflusci.2013.03.003.
- A. M. Aneesh, A. Sharma, A. Srivastava, and P. Chaudhury, “Effects of wavy channel configurations on thermal-hydraulic characteristics of printed circuit heat exchanger (PCHE),” Int. J. Heat Mass Transf., vol. 118, pp. 304–315, Mar. 2018. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.10.111.
- Y. Jiang et al., “Design and dynamic modeling of printed circuit heat exchangers for supercritical carbon dioxide Brayton power cycles,” Appl. Energy, vol. 231, pp. 1019–1032, Dec. 2018. DOI: https://doi.org/10.1016/j.apenergy.2018.09.193.
- M. H. Chen, X. D. Sun, and R. N. Christensen, “Thermal-hydraulic performance of printed circuit heat exchangers with zigzag flow channels,” Int. J. Heat Mass Transf., vol. 130, pp. 356–367, Mar. 2019. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2018.10.031.
- C. W. Shin and H. C. No, “Experimental study for pressure drop and flow instability of two-phase flow in the PCHE-type steam generator for SMRs,” Nucl. Eng. Des., vol. 318, pp. 109–118, Jul. 2017. DOI: https://doi.org/10.1016/j.nucengdes.2017.04.004.
- D. Kwon, L. Jin, W. S. Jung, and S. Jeong, “Experimental investigation of heat transfer coefficient of mini-channel pche (printed circuit heat exchanger),” Cryogenics, vol. 92, pp. 41–49, Jun. 2018. DOI: https://doi.org/10.1016/j.cryogenics.2018.03.011.
- Q. Huang, L. Jia, C. Dang, and L. X. Yang, “Experimental study on flow boiling of deionized water in a horizontal long small channel,” J. Therm. Sci., vol. 27, no. 2, pp. 157–166, Apr. 2018. DOI: https://doi.org/10.1007/s11630-018-0996-1.
- S. Lee, V. S. Devahdhanush, and I. Mudawar, “Investigation of subcooled and saturated boiling heat transfer mechanisms, instabilities, and transient flow regime maps for large length-to-diameter ratio micro-channel heat sinks,” Int. J. Heat Mass Transf., vol. 123, pp. 172–191, Aug. 2018. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2018.02.020.
- D. Jige, S. Kikuchi, H. Eda, and N. Inoue, “Flow boiling in horizontal multiport tube: Development of new heat transfer model for rectangular minichannels,” Int. J. Heat Mass Transf., vol. 144, pp. 1–13, Dec. 2019. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.118668.
- V. V. Kuznetsov, A. S. Shamirzaev, I. A. Kozulin, and S. P. Kozlov, “Correlation of the flow pattern and flow boiling heat transfer in microchannels,” Heat Transf. Eng., vol. 34, no. 2-3, pp. 235–245, 2013. DOI: https://doi.org/10.1080/01457632.2013.703564.
- H. X. Chen, Y. Sun, L. B. Huang, and X. D. Wang, “Nucleation and sliding growth of boiling bubbles on locally heated silicon surfaces,” Appl. Therm. Eng., vol. 143, pp. 1068–1078, Jul. 2018. DOI: https://doi.org/10.1016/j.applthermaleng.2018.07.128.
- H. X. Chen, Y. Sun, H. Y. Xiao, and X. D. Wang, “Bubble dynamics and heat transfer characteristics on a micropillar‑structured surface with different nucleation site positions,” J. Therm. Anal. Calorim., vol. 141, no. 1, pp. 447–464, Jan 2020. DOI: https://doi.org/10.1007/s10973-020-09301-x.
- W. D. Peng et al., “Parameter sensitivity analysis and model verification of two-phase CFD simulation in nucleate boiling,” Nucl. Sci. Eng., vol. 38, no. 2, pp. 26–35, Apr. 2018. DOI: https://doi.org/10.3969/j.issn.0258-0918.
- R. Thakrar, J. Murallidharan, and S. P. Walker, “CFD investigation of nucleate boiling in non-circular geometries at high pressure,” Nucl. Eng. Des., vol. 312, pp. 410–421, Feb. 2017. DOI: https://doi.org/10.1016/j.nucengdes.2016.08.020.
- R. Zhang, T. L. Cong, W. X. Tian, S. Z. Qiu, and G. H. Su, “Effects of turbulence models on forced convection subcooled boiling in vertical pipe,” Ann. Nucl. Energy, vol. 80, pp. 293–302, Jun. 2015. DOI: https://doi.org/10.1016/j.anucene.2015.01.039.
- J. R. Thome and A. Cioncolini, “Unified modeling suite for two-phase flow, convective boiling, and condensation in macro- and microchannels,” Heat Transf. Eng., vol. 37, no. 13-14, pp. 1148–1157, Sep. 2016. DOI: https://doi.org/10.1080/01457632.2015.1112212.
- I. S. Kiyomura, T. S. Mogaji, L. L. Manetti, and E. M. Cardoso, “A predictive model for confined and unconfined nucleate boiling heat transfer coefficient,” Appl. Therm. Eng., vol. 127, pp. 1274–1284, Dec. 2017. DOI: https://doi.org/10.1016/j.applthermaleng.2017.08.135.
- S. Dahariya and A. R. Betz, “High pressure pool boiling: Mechanisms for heat transfer enhancement and comparison to existing models,” Int. J. Heat Mass Transf., vol. 141, pp. 696–706, Oct. 2019. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.07.016.
- Y. Kim, D. H. Shin, J. S. Kim, S. M. You, and J. Lee, “Boiling and condensation heat transfer of inclined two-phase closed thermosyphon with various filling ratios,” Appl. Therm. Eng., vol. 145, pp. 328–342, Dec. 2018. DOI: https://doi.org/10.1016/j.applthermaleng.2018.09.037.
- P. Domalapally, E. Rizzo, L. S. Richard, F. Subba, and R. Zanino, “CFD analysis of flow boiling in the ITER first wall,” Fusion Eng. Des., vol. 87, no. 5-6, pp. 556–560, Aug. 2012. DOI: https://doi.org/10.1016/j.fusengdes.2012.01.024.
- S. S. Paramanantham, C. T. Ha, and W. G. Park, “Numerical investigation of single and multiple bubble condensing behaviors in subcooled flow boiling based on homogeneous mixture model,” Int. J. Mech. Sci., vol. 136, pp. 220–233, Feb. 2018. DOI: https://doi.org/10.1016/j.ijmecsci.2017.12.040.
- M. D. Lorenzo et al., “Homogeneous two-phase flow models and accurate steam-water table look-up method for fast transient simulations,” Int. J. Multiphase Flow, vol. 95, pp. 199–219, 2017. DOI: https://doi.org/10.1016/j.ijmultiphaseflow.2017.06.001.
- M. Banowski, U. Hampel, E. Krepper, M. Beyer, and D. Lucas, “Experimental investigation of two-phase pipe flow with ultrafast X-ray tomography and comparison with state-of-the-art CFD simulation,” Nucl. Eng. Des., vol. 336, pp. 90–104, Sep. 2018. DOI: https://doi.org/10.1016/j.nucengdes.2017.06.035.
- H. W. Li, J. W. Li, Q. Su, J. P. Liu, and B. Sun, “Analysis of the characteristics of two-phase flow pattern in y-shape mixed microchannel based on double coupled duffing vibration simulation detection system,” Exp. Therm. Fluid Sci., vol. 91, pp. 432–442, Feb. 2018. DOI: https://doi.org/10.1016/j.expthermflusci.2017.10.039.
- Q. Liu, W. J. Wang, and B. Palm, “A numerical study of the transition from slug to annular flow in micro-channel convective boiling,” Appl. Therm. Eng., vol. 112, pp. 73–81, Feb. 2017. DOI: https://doi.org/10.1016/j.applthermaleng.2016.10.020.
- R. J. Mofat, “Describing the uncertainties in experimental results,” Exp. Therm. Fluid Sci., vol. 1, no. 1, pp. 3–17, 1998. DOI: https://doi.org/10.1016/0894-1777(88)90043-X.
- N. Kurul and M. Z. Podowski, “Multidimensional effects in force convection subcooled boiling,” Proc. 1990. Heat. Trans. Conf., Aug 1990. pp. 21–26. DOI: https://doi.org/10.1615/IHTC9.40.
- J. Weisman and B. S. Pei, “Prediction of critical heat flux in flow boiling at low qualities,” Int. J. Heat Mass Transf., vol. 26, no. 10, pp. 1463– 1477, Oct 1983. DOI: https://doi.org/10.1016/S0017-9310(83)80047-7.
- M. Lemmert and J. M. Chawla, “Influence of flow velocity on surface boiling heat transfer coefficient,” in Heat Transfer in Boiling, E. Hahne and U. Grigull, Eds. New York, NY, USA: Academic Press and Hemisphere, 1977, pp. 247.
- M. Z. Podowski and R. M. Podowski, “Mechanistic multidimensional modeling of forced convection boiling heat transfer,” Sci. Technol. Nucl. Ins., vol. 2009, no. 11, pp. 1–10, 2009. DOI: https://doi.org/10.1155/2009/387020.
- R. Cole, “A photographic study of pool boiling in the region of the critical heat flux,” AIChE J, vol. 6, no. 4, pp. 533–538, Dec. 1960. DOI: https://doi.org/10.1002/aic.690060405.
- V. I. Tolubinsky and D. M. Kostanchuk, “Vapour bubbles growth rate and heat transfer intensity at subcooled water boiling,” Proc. 4th Int. Heat. Trans. Conf., Sep. 1970, pp. 1–11. DOI: https://doi.org/10.1615/IHTC4.250.
- V. H. Del Valle and D. B. R. Kenning, “Subcooled flow boiling at high heat flux,” Int. J. Heat Mass Transf., vol. 28, no. 10, pp. 1907–1920, Oct. 1985. DOI: https://doi.org/10.1016/0017-9310(85)90213-3.
- W. E. Ranz and W. R. Marshall, “Evaporation from drops – Part I and II,” Chem. Eng. Prog., vol. 48, no. 3, pp. 14–146, Mar. 1952.
- A. Tomiyama, I. Kataoka, I. Zun, and T. Sakaguchi, “Drag coefficients of single bubbles under normal and micro gravity conditions,” JSME Int. J. Ser. B, Fluids Therm. Eng., vol. 41, no. 2, pp. 472–479, May 1998. DOI: https://doi.org/10.1299/jsmeb.41.472.
- T. R. Auton, J. C. R. Hunt, and M. Prud’homme, “The force exerted on a body in inviscid unsteady non-uniform rotational flow,” J. Fluid Mech., vol. 197, no. 11, pp. 241–257, 1988. DOI: https://doi.org/10.1017/S0022112088003246.
- W. M. Rohsenow, “A method of correlating heat transfer data for surface boiling liquids,” Trans. ASME, vol. 74, pp. 969–976, 1952.
- T. Hibiki and M. Ishii, “Active nucleation site number density in boiling systems,” Int. J. Heat Mass Transf., vol. 46, no. 14, pp. 2587–2601, Jul. 2003. DOI: https://doi.org/10.1016/S0017-9310(03)00031-0.
- G. Kocamustafaogullari, “Pressure dependence of bubble departure diameter for water,” Int. Comm. Heat Mass Transf., vol. 10, no. 6, pp. 501–509, Dec. 1983. DOI: https://doi.org/10.1016/0735-1933(83)90057-X.