References
- T. Adamek and R. L. Webb, “Prediction of film condensation on horizontal integral fin tubes,” Int. J. Heat Mass Transfer, vol. 33, no. 8, pp. 1721–1735, Aug. 1990. DOI: https://doi.org/10.1016/0017-9310(90)90027-R.
- P. J. Marto, “Heat transfer and two-phase flow during shell-side condensation,” Heat Transfer Eng., vol. 5, no. 1-2, pp. 31–61, 1984. DOI: https://doi.org/10.1080/01457638408962767.
- N. H. Kim, “Steam condensation and tube-side heat transfer of titanium corrugated tubes,” Heat Transfer Eng., vol. 41, no. 4, pp. 324–332, Jan. 2020. DOI: https://doi.org/10.1080/01457632.2018.1540455.
- L. Doretti, C. Zilio, S. Mancin, and A. Cavallini, “Condensation flow patterns inside plain and microfin tubes: A review,” Int. J. Refrig., vol. 36, no. 2, pp. 567–587, Mar. 2013. DOI: https://doi.org/10.1016/j.ijrefrig.2012.10.021.
- A. Cavallini, et al., “Condensation inside and outside smooth and enhanced tubes – a review of recent research,” Int. J. Refrig., vol. 26, no. 4, pp. 373–392, Jun. 2003. DOI: https://doi.org/10.1016/S0140-7007(02)00150-0.
- J. E. Hajal, J. R. Thome, and A. Cavallini, “Condensation in horizontal tubes, Part 1: Two-phase flow pattern map,” Int. J. Heat Mass Transfer, vol. 46, no. 18, pp. 3349–3363, Aug. 2003. DOI: https://doi.org/10.1016/S0017-9310(03)00139-X.
- A. S. Dalkilic and S. Wongwises, “Intensive literature review of condensation inside smooth and enhanced tubes,” Int. J. Heat Mass Transfer, vol. 52, no. 15-16, pp. 3409–3426, Jul. 2009. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2009.01.011.
- A. Miyara, Y. Otsubo, S. Ohtsuka, and Y. Mizuta, “Effects of fin shape on condensation in herringbone microfin tubes,” Int. J. Refrig, vol. 26, no. 4, pp. 417–424, Jun. 2003. DOI: https://doi.org/10.1016/S0140-7007(02)00154-8.
- J. Shi, G. Zheng, and Z. Chen, “Experimental investigation on flow condensation in horizontal tubes filled with annular metal foam,” Int. J. Heat Mass Transfer, vol. 116, pp. 920–930, Jan. 2018. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.09.007.
- L. Cheng and G. Xia, “Fundamental issues, mechanisms and models of flow boiling heat transfer in microscale channels,” Int. J. Heat Mass Transfer, vol. 108, part A, pp. 97–127, May 2017. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.12.003.
- D. B. R. Kenning and M. G. Cooper, “Saturated flow boiling of water in vertical tubes,” Int. J. Heat Mass Transfer, vol. 32, no. 3, pp. 445–458, Mar. 1989. DOI: https://doi.org/10.1016/0017-9310(89)90132-4.
- W.-L. Cheng, H. Chen, S. Yuan, Q. Zhong, and Y.-F. Fan, “Experimental study on heat transfer characteristics of R134a flow boiling in “Ω”-shaped grooved tube with different flow directions,” Int. J. Heat Mass Transfer, vol. 108, part A, pp. 988–997, Jan. 2017. DOI: DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.12.053.
- S. Ndao, Y. Peles, and M. K. Jensen, “Experimental investigation of flow boiling heat transfer of jet impingement on smooth and micro structured surfaces,” Int. J. Heat Mass Transfer, vol. 55, no. 19-20, pp. 5093–5101, Sep. 2012. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2012.05.009.
- A. D. Sommers and K. L. Yerkes, “Using micro-structural surface features to enhance the convective flow boiling heat transfer of R-134a on aluminum,” Int. J. Heat Mass Transfer, vol. 64, pp. 1053–1063, Sep. 2013. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2013.05.053.
- D. J. Kukulka, R. Smith, and W. Li, “Comparison of tubeside condensation and evaporation characteristics of smooth and enhanced heat transfer 1EHT tubes,” Appl. Thermal Eng, vol. 89, pp. 1079–1086, Oct. 2015. DOI: https://doi.org/10.1016/j.applthermaleng.2015.01.066.
- S.-p. Guo, et al., “Condensation and evaporation heat transfer characteristics in horizontal smooth, herringbone and enhanced surface EHT tubes,” Int. J. Heat Mass Transfer, vol. 85, pp. 281–291, Jun. 2015. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2015.01.115.
- S. Mancin, A. Diani, and L. Rossetto, “Experimental measurements of R134a flow boiling inside a 3.4-mm ID microfin tube,” Heat Transfer Eng, vol. 36, no. 14-15, pp. 1218–1229, Sep. 2015. DOI: https://doi.org/10.1080/01457632.2015.994938.
- A. Diani, A. Cavallini, and L. Rossetto, “R1234yf flow boiling heat transfer inside a 2.4 mm microfin tube,” Heat Transfer Eng, vol. 38, no. 3, pp. 303–312, Feb. 2017. DOI: https://doi.org/10.1080/01457632.2016.1189260.
- X. H. Han, Y. B. Fang, M. Wu, X. G. Qiao, and G. M. Chen, “Study on flow boiling heat transfer characteristics of R161/oil mixture inside horizontal micro-fin tube,” Int. J. Heat Mass Transfer, vol. 104, pp. 276–287, Jan. 2017. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.08.043.
- A. Padovan, D. D. Col, and L. Rossetto, “Experimental study on flow boiling of R134a and R410A in a horizontal microfin tube at high saturation temperatures,” Appl. Thermal Eng, vol. 31, no. 17–18, pp. 3814–3826, Dec. 2011. DOI: https://doi.org/10.1016/j.applthermaleng.2011.07.026.
- Z. Wu, B. Sundén, V. V. Wadekar, and W. Li, “Heat transfer correlations for single-phase flow, condensation, and boiling in microfin tubes,” Heat Transfer Eng, vol. 36, no. 6, pp. 582–595, Apr. 2015. DOI: https://doi.org/10.1080/01457632.2014.939531.
- M. Piasecka and K. Strąk, “Influence of the surface enhancement on the flow boiling heat transfer in a minichannel,” Heat Transfer Eng., vol. 40, no. 13–14, pp. 1162–1175, Apr. 2019. DOI: https://doi.org/10.1080/01457632.2018.1457264.
- B. Niezgoda-Żelasko, “Heat transfer and pressure drop measurements during boiling in vertical tubes with coiled-wire inserts,” Heat Transfer Eng., vol. 40, no. 19, pp. 1633–1648, Nov. 2019. DOI: https://doi.org/10.1080/01457632.2018.1480880.
- B. Niezgoda-Żelasko and J. Żelasko, “Refrigerant boiling at low heat flux in vertical tubes with heat transfer enhancing fittings,” Int. J. Refrig, vol. 54, pp. 151–169, Jun. 2015. DOI: https://doi.org/10.1016/j.ijrefrig.2015.03.007.
- S. Mancin, A. Diani, L. Doretti, and L. Rossetto, “R134a and R1234ze(E) liquid and flow boiling heat transfer in a high porosity copper foam,” Int. J. Heat Mass Transfer, vol. 74, pp. 77–87, Jul. 2014. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2014.02.070.
- G. B. Abadi, C. Moon, and K. C. Kim, “Flow boiling visualization and heat transfer in metal-foam-filled mini tubes–Part I: Flow pattern map and experimental data,” Int. J. Heat Mass Transfer, vol. 98, pp. 857–867, Jul. 2016. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.03.043.
- Y. Zhu, H. Hu, S. Sun, and G. Ding, “Heat transfer measurements and correlation of refrigerant flow boiling in tube filled with copper foam,” Int. J. Refrig., vol. 38, pp. 215–226, Feb. 2014. DOI: https://doi.org/10.1016/j.ijrefrig.2013.04.012.
- Y. Zhu, H. Hu, S. Sun, and G. Ding, “Flow boiling of refrigerant in horizontal metal-foam filled tubes: Part 1–Two-phase flow pattern visualization,” Int. J. Heat Mass Transfer, vol. 91, pp. 446–453, Dec. 2015. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2015.07.096.
- X. W. Wang, J. Y. Ho, K. C. Leong, and T. N. Wong, “Condensation heat transfer and pressure drop characteristics of R-134a in horizontal smooth tubes and enhanced tubes fabricated by selective laser melting,” Int. J. Heat Mass Transfer, vol. 126, part A, pp. 949–962, Nov. 2018. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2018.04.163.
- L. Wojtan, T. Ursenbacher, and J. R. Thome, “Investigation of flow boiling in horizontal tubes: Part I – A new diabatic two-phase flow pattern map,” Int. J. Heat Mass Transfer, vol. 48, no. 14, pp. 2955–2969, Jul. 2005. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2004.12.012.
- Y. Mori, K. Hijikata, S. Hirasawa, and W. Nakayama, “Optimized performance of condensers with outside condensing surfaces,” J. Heat Transfer, vol. 103, no. 1, pp. 96–102, Feb. 1981. DOI: https://doi.org/10.1115/1.3244439.
- H. Honda and S. Nozu, “A prediction method for heat transfer during film condensation on horizontal low integral-fin tubes,” J. Heat Transfer, vol. 109, no. 1, pp. 218–225, Feb. 1987. DOI: https://doi.org/10.1115/1.3248046.
- Z. Liu and R. H. S. Winterton, “A general correlation for saturated and subcooled flow boiling in tubes and annuli, based on a nucleate pool boiling equation,” Int. J. Heat Mass Transfer, vol. 34, no. 11, pp. 2759–2766, Nov. 1991. DOI: https://doi.org/10.1016/0017-9310(91)90234-6.
- L. Wojtan, T. Ursenbacher, and J. R. Thome, “Investigation of flow boiling in horizontal tubes: Part II – Development of a new heat transfer model for stratified-wavy, dryout and mist flow regimes,” Int. J. Heat Mass Transfer, vol. 48, no. 14, pp. 2970–2985, Jul. 2005. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2004.12.013.
- S. Wellsandt and L. Vamling, “Prediction method for flow boiling heat transfer in a herringbone microfin tube,” Int. J. Refrig, vol. 28, no. 6, pp. 912–920, Sep. 2005. DOI: https://doi.org/10.1016/j.ijrefrig.2005.01.009.
- L. M. Chamra, R. L. Webb, and M. R. Randlett, “Advanced micro-fin tubes for evaporation,” Int. J. Heat Mass Transfer, vol. 39, no. 9, pp. 1827–1838, Jun. 1996. DOI: https://doi.org/10.1016/0017-9310(95)00276-6.