References
- S. Agarwal and R. P. Sharma, “Numerical investigation of heat transfer enhancement using hybrid vortex generator arrays in fin-and-tube heat exchangers,” J. Thermal Sci. Eng. Appl., vol. 8, no. 3, pp. 031007, 2016. DOI: https://doi.org/10.1115/1.4033213.
- J. Yin, Z. He, F. Chen and J. Ma, “Effect of tube location change on heat transfer characteristics of plain plate fin-and-tube heat exchangers,” J. Thermal Sci. Eng Appl.., vol. 6, no. 2, pp. 021005, 2013. DOI: https://doi.org/10.1115/1.4025229.
- G. Biswas, H. Chattopadhyay and A. Sinha, “Augmentation of heat transfer by creation of streamwise longitudinal vortices using vortex generators,” Heat Transf. Eng., vol. 33, no. 4-5, pp. 406–424, 2012. DOI: https://doi.org/10.1080/01457632.2012.614150.
- M. T. Al-Asadi, A. Al-Damook and M. C. Wilson, “Assessment of vortex generator shapes and pin fin perforations for enhancing water-based heat sink performance,” Int. Commun. Heat Mass Transf., vol. 91, pp. 1–10, February 2018. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2017.11.002.
- P. Promvonge and S. Skullong, “Heat transfer augmentation in solar receiver heat exchanger with hole-punched wings,” Appl. Thermal Eng., vol. 155, pp. 59–69, June 2019. DOI: https://doi.org/10.1016/j.applthermaleng.2019.03.132.
- C. Habchi, et al., “Enhancing heat transfer in vortex generator-type multifunctional heat exchangers,” Appl. Thermal Eng., vol. 38, pp. 14–25, May 2012. DOI: https://doi.org/10.1016/j.applthermaleng.2012.01.020.
- C. Thianpong, P. Eiamsa-Ard and S. Eiamsa-Ard, “Heat transfer and thermal performance characteristics of heat exchanger tube fitted with perforated twisted-tapes,” Heat Mass Transf., vol. 48, no. 6, pp. 881–892, 2012. DOI: https://doi.org/10.1007/s00231-011-0943-0.
- H. Meng, G. Zhu, Y. Yu, Z. Wang and J. Wu, “The effect of symmetrical perforated holes on the turbulent heat transfer in the static mixer with modified Kenics segments,” Int. J. Heat Mass Transf., vol. 99, pp. 647–659, August 2016. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.03.110.
- M. E. Nakhchi and J. A. Esfahani, “Numerical investigation of heat transfer enhancement inside heat exchanger tubes fitted with perforated hollow cylinders,” Int. J. Thermal Sciences, vol. 147, pp. 106153, January 2020. DOI: https://doi.org/10.1016/j.ijthermalsci.2019.106153.
- M. E. Nakhchi and J. A. Esfahani, “Numerical investigation of different geometrical parameters of perforated conical rings on flow structure and heat transfer in heat exchangers,” Appl. Thermal Eng., vol. 156, pp. 494–505, June 2019. DOI: https://doi.org/10.1016/j.applthermaleng.2019.04.067.
- W. Liu, P. Liu, J. B. Wang, N. B. Zheng and Z. C. Liu, “Exergy destruction minimization: A principle to convective heat transfer enhancement,” Int. J. Heat Mass Transf., vol. 122, pp. 11–21, July 2018. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2018.01.048.
- Y. Wang, P. Liu, F. Shan, Z. Liu and W. Liu, “Effect of longitudinal vortex generator on the heat transfer enhancement of a circular tube,” Appl. Thermal Eng., vol. 148, pp. 1018–1028, February 2019. DOI: https://doi.org/10.1016/j.applthermaleng.2018.11.080.
- S. Chamoli, R. Lu and P. Yu, “Thermal characteristic of a turbulent flow through a circular tube fitted with perforated vortex generator inserts,” Appl. Thermal Eng., vol. 121, pp. 1117–1134, July 2017. DOI: https://doi.org/10.1016/j.applthermaleng.2017.03.145.
- Z. Sun, K. Zhang, W. Li, Q. Chen and N. Zheng, “Investigations of the turbulent thermal-hydraulic performance in circular heat exchanger tubes with multiple rectangular winglet vortex generators,” Appl. Thermal Eng., vol. 168, pp. 114838, March 2020. DOI: https://doi.org/10.1016/j.applthermaleng.2019.114838.
- C. Zhai, M. D. Islam, M. M. Alam, R. Simmons and I. Barsoum, “Parametric study of major factors affecting heat transfer enhancement in a circular tube with vortex generator pairs,” Appl. Thermal Eng., vol. 153, pp. 330–340, May 2019. DOI: https://doi.org/10.1016/j.applthermaleng.2019.03.018.
- Y. Xu, M. D. Islam and N. Kharoua, “Experimental study of thermal performance and flow behaviour with winglet vortex generators in a circular tube,” Appl. Thermal Eng, vol. 135, pp. 257–268, May 2018. DOI: https://doi.org/10.1016/j.applthermaleng.2018.01.112.
- C. Habchi, et al., “Entropy production and field synergy principle in turbulent vortical flows,” Int. J. Thermal Sci, vol. 50, no. 12, pp. 2365–2376, 2011. DOI: https://doi.org/10.1016/j.ijthermalsci.2011.07.012.
- C. Habchi, T. Lemenand, D. D. Valle and H. Peerhossaini, “Turbulent mixing and residence time distribution in novel multifunctional heat exchangers-reactors,” Chem. Eng.Process. Process Intensification, vol. 49, no. 10, pp. 1066–1075, 2010. DOI: https://doi.org/10.1016/j.cep.2010.08.007.
- C. Habchi and J. L. Harion, “Residence time distribution and heat transfer in circular pipe fitted with longitudinal rectangular wings,” Int. J. Heat Mass Transf., vol. 74, pp. 13–24, July 2014. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2014.03.007.
- S. Ali, C. Habchi, S. Menanteau, T. Lemenand and J.-L. Harion, “Three-dimensional numerical study of heat transfer and mixing enhancement in a circular pipe using self-sustained oscillating flexible vorticity generators,” Chem. Eng. Sci., vol. 162, pp. 152–174, April 2017. DOI: https://doi.org/10.1016/j.ces.2016.12.039.
- M. Li, T. S. Khan, E. Al-Hajri and Z. H. Ayub, “Single phase heat transfer and pressure drop analysis of a dimpled enhanced tube,” Appl. Thermal Eng., vol. 101, pp. 38–46, May 2016. DOI: https://doi.org/10.1016/j.applthermaleng.2016.03.042.
- P. Promvonge and C. Thianpong, “Thermal performance assessment of turbulent channel flows over different shaped ribs,” Int. Commun. Heat Mass Trans., vol. 35, no. 10, pp. 1327–1334, 2008. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2008.07.016.
- Chemineer, Kenics HEV High Efficiency Static Mixer: The Ideal Solution for Turbulent Flow Applications. Houston, USA: Chemineer, Inc, 2013
- C. Habchi, T. Lemenand, D. D. Valle and H. Peerhossaini, “Turbulence behavior of artificially generated vorticity,” J. Turbulence, vol. 11, pp. N36, August 2010. DOI: https://doi.org/10.1080/14685248.2010.510841.
- J. O. Hinze, Turbulence. New York: McGraw-Hill, 1975, pp. 790.
- R. K. Rahmani, T. G. Keith and A. Ayasoufi, “Numerical study of the heat transfer rate in a helical static mixer,” J. Heat Transfer, vol. 128, no. 8, pp. 769–783, 2006. DOI: https://doi.org/10.1115/1.2217749.
- J. Lienhard V and J. Lienhard, IV, A Heat Transfer Textbook. New York: Dover Publications, 2011
- ANSYS, ANSYS Fluent Academic License, Canonsburg, Pennsylvania: ANSYS, 2015
- T. Barth and D. Jespersen, “The design and application of upwind schemes on unstructured meshes,” in 27th Aerospace Sciences Meeting, 1989. Reno, NV, USA, DOI: https://doi.org/10.2514/6.1989-366.
- R. F. Warming and R. M. Beam, “Upwind second-order difference schemes and applications in aerodynamic flows,” AIAA J., vol. 14, no. 9, pp. 1241–1249, 1976. DOI: https://doi.org/10.2514/3.61457.
- S. Patankar, Numerical Heat Transfer and Fluid Flow. Boca Raton, Florida: CRC Press, 1980,
- H. Mohand Kaci, T. Lemenand, D. D. Valle and H. Peerhossaini, “Effects of embedded streamwise vorticity on turbulent mixing,” Chem. Eng. Process. Process Intensification, vol. 48, no. 10, pp. 1459–1476, 2009. DOI: https://doi.org/10.1016/j.cep.2009.08.002.
- B. E. Launder, “Second-moment closure: Present… and future?,” Int. J. Heat Fluid Flow, vol. 10, no. 4, pp. 282–300, 1989. DOI: https://doi.org/10.1016/0142-727X(89)90017-9.
- M. Wolfshtein, “The velocity and temperature distribution in one-dimensional flow with turbulence augmentation and pressure gradient,” Int. J. Heat Mass Transf., vol. 12, no. 3, pp. 301–318, 1969. DOI: 0.1016/0017-9310(69)90012-X DOI: https://doi.org/10.1016/0017-9310(69)90012-X.
- H. C. Chen and V. C. Patel, “Near-wall turbulence models for complex flows including separation,” AIAA J., vol. 26, no. 6, pp. 641–648, 1988. DOI: https://doi.org/10.2514/3.9948.
- V. Gnielinski, “New equations for heat and mass transfer in turbulent pipe and channel flow,” Int. Chem. Eng., vol. 16, no. 2, pp. 359–368, 1976.
- F. White, Fluid Mechanics. 8th ed. New York: McGraw-Hill, 2016
- J. Baldyga and J. Bourne, Turbulent Mixing and Chemical Reactions, Hoboken, New Jersey: Wiley, 1999
- C. Habchi, T. Lemenand, D. Della Valle and H. Peerhossaini, “Mixing assessment by chemical probe,” J. Ind. Eng. Chem., vol. 20, no. 4, pp. 1411–1420, 2014. DOI: 0.1016/j.jiec.2013.07.026 DOI: https://doi.org/10.1016/j.jiec.2013.07.026.