References
- C.-C. Cheng, P.-C. Chang, H.-C. Li, and F.-I. Hsu, “Design of a single-phase immersion cooling system through experimental and numerical analysis,” Int. J. Heat Mass Transf., vol. 160, pp. 120203–120212, Oct. 2020. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2020.120203.
- Y. Ma, A. Shahsavar, and P. Talebizadehsardari, “Two-phase mixture simulation of the effect of fin arrangement on first and second law performance of a bifurcation microchannels heatsink operated with biologically prepared water-Ag nanofluid,” Int. Commun. Heat Mass, vol. 114, pp. 104518–104554, May 2020. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2020.104554.
- W. Zhou, Y. Li, Z. Chen, L. Deng, and Y. Gan, “Ultra-thin flattened heat pipe with a novel band-shape spiral woven mesh wick for cooling smartphones,” Int. J. Heat Mass Transf., vol. 146, pp. 118715–118792, Jan. 2020. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.118792.
- M. Mohammadi, A. Taheri, M. Passandideh-Fard, and M. Sardarabadi, “Electronic chipset thermal management using a nanofluid-based mini-channel heat sink: An experimental study,” Int. Commun. Heat Mass, vol. 118, pp. 104836–104839, Nov. 2020. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2020.104836.
- N. Zhao, L. Guo, C. Qi, T. Chen, and X. Cui, “Experimental study on thermo-hydraulic performance of nanofluids in CPU heat sink with rectangular grooves and cylindrical bugles based on exergy efficiency,” Energy Convers. manag., vol. 181, pp. 235–246, Feb. 2019. DOI: https://doi.org/10.1016/j.enconman.2018.11.076.
- M. Bahiraei and S. Heshmatian, “Efficacy of a novel liquid block working with ananofluid containing graphene nanoplatelets decorated with silver nanoparticles compared with conventional CPU coolers,” Appl. Therm. Eng., vol. 127, pp. 1233–1245, Dec. 2017. DOI: https://doi.org/10.1016/j.applthermaleng.2017.08.136.
- T. Yousefi, S. Mousavi, B. Farahbakhsh, and M. Saghir, “Experimental investigation on the performance of CPU coolers: Effect of heat pipe inclination angle and the use of nanofluids,” Microelectronics Rel., vol. 53, no. 12, pp. 1954–1961, 2013. DOI: https://doi.org/10.1016/j.microrel.2013.06.012.
- T. Zeng, H. Wang, M. Yang, and J. Alexandersen, “Topology optimization of heat sinks for instantaneous chip cooling using a transient pseudo-3D thermofluid model,” Int. J. Heat Mass Transf., vol. 154, pp. 119621–119681, Jun. 2020. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2020.119681.
- M. L. Elsayed, O. Mesalhy, J. P. Kizito, Q. H. Leland, and L. C. Chow, “Performance of a guided plate heat sink at high altitude,” Int. J. Heat Mass Transf., vol. 147, pp. 118915–118926, Feb. 2020. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.118926.
- A. Moradikazerouni et al., “Investigation of a computer CPU heat sink under laminar forced convection using a structural stability method,” Int. J. Heat Mass Transf., vol. 134, pp. 1218–1226, May 2019. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.02.029.
- S. Maalej, A. Zayoud, I. Abdelaziz, I. Saad, and M. Zaghdoudi, “Thermal performance of finned heat pipe system for central processing unit cooling,” Energy Convers. Manag., vol. 218, pp. 112919–112977, Aug. 2020. DOI: https://doi.org/10.1016/j.enconman.2020.112977.
- J. Choi, M. Jeong, J. Yoo, and M. Seo, “A new CPU cooler design based on an active cooling heatsink combined with heat pipes,” Appl. Therm. Eng., vol. 44, pp. 50–56, Nov. 2012. DOI: https://doi.org/10.1016/j.applthermaleng.2012.03.027..
- A. Taheri, M. Ghasemian Moghadam, M. Mohammadi, M. Passandideh-Fard, and M. Sardarabadi, “A new design of liquid-cooled heat sink by altering the heat sinkheat pipe application: Experimental approach and prediction via artificial neural network,” Energy Convers. Manag., vol. 206, pp. 112411–112485, Feb. 2020. DOI: https://doi.org/10.1016/j.enconman.2020.112485.
- P. Naphon and S. Wiriyasart, “Liquid cooling in the mini-rectangular fin heatsink with and without thermoelectric for CPU,” Int. Commun. Heat Mass, vol. 36, no. 2, pp. 166–171, 2009. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2008.10.002.
- M. Sarafraz, A. Arya, F. Hormozi, and V. Nikkhah, “On the convective thermal performance of a CPU cooler working with liquid gallium and CuO/water nanofluid: Acomparative study,” Appl. Therm. Eng., vol. 112, pp. 1373–1381, Feb. 2017. DOI: https://doi.org/10.1016/j.applthermaleng.2016.10.196.
- G. Zhou, J. Li, and Z. Jia, “Power-saving exploration for high-end ultra-slim laptop computers with miniature loop heat pipe cooling module,” Appl. Energy, vol. 239, pp. 859–875, Feb. 2019. DOI: https://doi.org/10.1016/j.apenergy.2019.01.258..
- K. C. Ng, C. R. Yap, and M. A. Chan, “A universal performance chart for CPU cooling devices,” Heat Transf. Eng., vol. 29, no. 7, pp. 651–656, 2008. DOI: https://doi.org/10.1080/01457630801922618..
- I. Mihai, C. Pîrghie, and V. Zegrean, “Research regarding heat exchange through nanometric polysynthetic thermal compound to cooler–CPU interface,” Heat Transf. Eng., vol. 31, no. 1, pp. 90–97, 2010. DOI: https://doi.org/10.1080/01457630902976000..
- N. Kim and S. Kim, ” “Self-convectional three-dimensional integrated circuit cooling system using micro flat heat pipe for portable devices,” Heat Transf. Eng., vol. 35, no. 10, pp. 924–932, 2014. DOI: https://doi.org/10.1080/01457632.2014.859514.
- C. J. Ho, Y. H. Chiou, W. M. Yan, and M. Ghalambaz, “Transient cooling characteristics of Al2O3-water nanofluid flow in a microchannel subject to a sudden-pulsed heat flux,” Int. J. Mech. Sci., vol. 151, pp. 95–105, Feb. 2019. https://doi.org/10.1016/j.ijmecsci.2018.11.017. DOI: .
- S. M. Hashem Zadeh, S. A. M. Mehryan, M. Sheremet, M. Ghodrat, and M. Ghalambaz, “Thermo-hydrodynamic and entropy generation analysis of a dilute aqueous suspension enhanced with nano-encapsulated phase change material,” Int. J. Mech. Sci., vol. 178, pp. 1–13, Jul. 2020. DOI: https://doi.org/10.1016/j.ijmecsci.2020.105609.
- S. A. M. Mehryan, M. Ghalambaz, L. Sasani Gargari, A. Hajjar, and M. Sheremet, “Natural convection flow of a suspension containing nano-encapsulated phase change particles in an eccentric annulus,” J. Energy Storage, vol. 28, pp. 101212–101236, Apr. 2020. https://doi.org/10.1016/j.est.2020.101236. DOI: .
- X. Chen, C. Sun, X. Xia, R. Liu, and F. Wang, “Conjugated heat transfer analysis of a foam filled double-pipe heat exchanger for high-temperature application,” Int. J. Heat Mass Transf., vol. 134, pp. 1003–1013, May 2019. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.01.100..
- M. Moze, A. Nemanic, and P. Poredos, “Experimental and numerical heat transfer analysis of heat-pipe-based CPU coolers and performance optimization methodology,” Appl. Therm. Eng., vol. 179, pp. 1–14, Oct. 2020. DOI: https://doi.org/10.1016/j.applthermaleng.2020.115720.
- R. S. Gaugler, “Heat transfer device,” U.S. Patent 2,350,348, June 6, 1944.
- L. Trefethen, “On the surface tension pumping of liquids or a possible role of the candlewick in space exploration,” G.E. Tech. Info. Ser., No. 615 D114, 1962.
- T. Bergman, A. Lavine, F. Incropera, and D. DeWitt, Fundamentals of Heat and Mass Transfer, 8th ed. Hoboken, NJ, USA: Wiley, 2019.
- S. W. Churchill and M. Bernstein, “A correlating equation for forced convection from gases and liquids to a circular cylinder in crossflow,” J. Heat Trans., vol. 99, no. 2, pp. 300–306, 1977. DOI: https://doi.org/10.1115/1.3450685..