References
- E. M. Ishiyama, F. Coletti, S. Macchietto, W. R. Paterson and D. I. Wilson, “Impact of deposit ageing on thermal fouling: Lumped parameter model,” AIChE J, vol. 56, no. 2, pp. NA–545, 2009. DOI: https://doi.org/10.1002/aic.11978.
- E. M. Ishiyama, W. R. Paterson and D. I. Wilson, “Optimum cleaning cycles for heat transfer equipment undergoing fouling and ageing,” Chem. Eng. Sci, vol. 66, no. 4, pp. 604–612, 2011. DOI: https://doi.org/10.1016/j.ces.2010.10.036.
- E. M. Ishiyama, W. R. Paterson and D. I. Wilson, “Aging is Important: Closing the Fouling–Cleaning Loop,” Heat Transfer Eng, vol. 35, no. 3, pp. 311–326, 2014. DOI: https://doi.org/10.1080/01457632.2013.825192.
- F. Schlüter, L. Schnöing, H. Zettler, W. Augustin and S. Scholl, “Measuring Local Crystallization Fouling in a Double-Pipe Heat Exchanger,” Heat Transfer Eng, vol. 41, no. 2, pp. 149–159, 2020. DOI: https://doi.org/10.1080/01457632.2018.1522084.
- T. R. Tuladhar, W. R. Paterson, N. Macleod and D. I. Wilson, “Development of a novel non-contact proximity gauge for thickness measurement of soft deposits and its application in fouling studies,” Can. J. Chem. Eng, vol. 78, no. 5, pp. 935–947, 2000. DOI: https://doi.org/10.1002/cjce.5450780511.
- T. R. Tuladhar, W. R. Paterson and D. I. Wilson, “Thermal Conductivity of Whey Protein Films Undergoing Swelling: Measurement by Dynamic Gauging,” Food Bioprod. Proc, vol. 80, no. 4, pp. 332–339, 2002. DOI: https://doi.org/10.1205/096030802321154862.
- R. J. Hooper, et al., “Comparative Studies of Fluid Dynamic Gauging and a Micromanipulation Probe for Strength Measurements,” Food Bioprod. Proc, vol. 84, no. 4, pp. 353–358, 2006. DOI: https://doi.org/10.1205/fbp06038.
- S. R. Suwarno, et al., “On-line biofilm strength detection in cross-flow membrane filtration systems,” Biofouling, vol. 34, no. 2, pp. 123–131, 2018. DOI: https://doi.org/10.1080/08927014.2017.1409892.
- J.-H. Tsai, G. L. Cuckston, B. Hallmark and D. I. Wilson, “Fluid-dynamic gauging for studying the initial swelling of soft solid layers,” AIChE J, vol. 65, no. 9, pp. e16664–e166676, 2019. DOI: https://doi.org/10.1002/aic.16664.
- M. Lemos, S. Wang, A. Ali, M. Simões and D. I. Wilson, “A fluid dynamic gauging device for measuring biofilm thickness on cylindrical surfaces,” Biochem. Eng. J, vol. 106, pp. 48–60, Feb. 2016. DOI: https://doi.org/10.1016/j.bej.2015.11.006.
- B. Petkovic and P. Watkinson, “Fouling of a Heated Rod in a Stirred Tank System,” Heat Transfer Eng, vol. 35, no. 3, pp. 302–310, 2014. DOI: https://doi.org/10.1080/01457632.2013.825191.
- G. L. Cuckston, Z. Alam, J. Goodwin, G. Ward and D. I. Wilson, “Quantifying the effect of solution formulation on the removal of soft solid food deposits from stainless steel substrates,” J. Food Eng, vol. 243, pp. 22–32, Feb. 2019. DOI: https://doi.org/10.1016/j.jfoodeng.2018.08.018.
- T. Geddert, W. Augustin and S. Scholl, “Induction Time in Crystallization Fouling on Heat Transfer Surfaces,” Chem. Eng. Technol, vol. 34, no. 8, pp. 1303–1310, 2011. DOI: https://doi.org/10.1002/ceat.201000469.
- K. Bode, R. J. Hooper, W. R. Paterson, D. Ian Wilson, W. Augustin and S. Scholl, “Pulsed Flow Cleaning of Whey Protein Fouling Layers,” Heat Transfer Eng, vol. 28, no. 3, pp. 202–209, 2007. DOI: https://doi.org/10.1080/01457630601064611.
- L. Bouvier, G. Delaplace and S. Lalot, “Continuous Monitoring of Whey Protein Fouling Using a Nonintrusive Sensor,” Heat Transfer Eng, vol. 41, no. 2, pp. 160–169, 2020. DOI: https://doi.org/10.1080/01457632.2018.1522091.
- N. Collier, et al., “Ultrasonic Adhesion Measurement of Whey Protein Fouling,” Heat Transfer Eng, vol. 36, no. 7-8, pp. 771–779, 2015. DOI: https://doi.org/10.1080/01457632.2015.954963.
- B. A. Fricke and B. R. Becker, “Evaluation of Thermophysical Property Models for Foods,” HVAC&R Res, vol. 7, no. 4, pp. 311–330, 2001. DOI: https://doi.org/10.1080/10789669.2001.10391278.
- T. J. Davies, S. C. Henstridge, C. R. Gillham and D. I. Wilson, “Investigation of Whey Protein Deposit Properties Using Heat Flux Sensors,” Food Bioprod. Proc, vol. 75, no. 2, pp. 106–110, 1997. DOI: https://doi.org/10.1205/096030897531414.