References
- H. Kramers, “Heat transfer from spheres to flowing media,” Physica, vol. 12, no. 2–3, pp. 61–80, 1946. DOI: https://doi.org/10.1016/S0031-8914(46)80024-7.
- A. Žukauskas, “Heat transfer from tubes in crossflow,” in Advances in Heat Transfer, vol. 8, J. P. Hartnett and T. F. Irvine, Eds. New York, NY: Elsevier, 1972, pp. 93–160.
- B. Blocken, T. Defraeye, A. Neale, D. Derome and J. Carmeliet, “High-resolution CFD simulations of forced convective heat transfer coefficients at exterior building surfaces,” in 8th Nordic Symposium on Building Physics (NSB 2008), Copenhagen, Denmark, Jun. 16–18, 2008, pp. 261–268.
- M. T. Kahsay, G. Bitsuamlak and F. Tariku, “Numerical analysis of convective heat transfer coefficient for building facades,” J. Build. Phys., vol. 42, no. 6, pp. 727–749, 2019. DOI: https://doi.org/10.1177/1744259118791207.
- B. Lloyd and R. Boehm, “Flow and heat transfer around a linear array of spheres,” Numer. Heat Transf. Part A Appl., vol. 26, no. 2, pp. 237–252, 1994. DOI: https://doi.org/10.1080/10407789408955990.
- H. Iacovides, B. Launder and A. West, “A comparison and assessment of approaches for modelling flow over in-line tube banks,” Int. J. Heat Fluid Flow, vol. 49, pp. 69–79, Oct. 2014. DOI: https://doi.org/10.1016/j.ijheatfluidflow.2014.05.011.
- N. K. Gakkai, “Heat transfer around tubes in in-line tube banks,” Bull. JSME, vol. 25, no. 204, pp. 919–926, 1982.
- J. Yang, Y. Hu, P. Qian, Z. Guo and Q. Wang, “Experimental study of forced convective heat transfer in packed beds with uniform and non-uniform spheres,” Heat Transf. Eng., vol. 41, no. 4, pp. 351–360, Feb. 2020. DOI: https://doi.org/10.1080/01457632.2018.1540460.
- M. Ali, A. Nuhait and R. Almuzaiqer, “The effect of square tube location in a vertical array of square tubes on natural convection heat transfer,” Heat Transf. Eng., vol. 39, no. 12, pp. 1036–1051, Jul. 2018. DOI: https://doi.org/10.1080/01457632.2017.1358485.
- P. D. Tegenaw, M. G. Gebrehiwot and M. Vanierschot, “On the comparison between computational fluid dynamics (CFD) and lumped capacitance modeling for the simulation of transient heat transfer in solar dryers,” Sol. Energy, vol. 184, pp. 417–425, May 2019. DOI: https://doi.org/10.1016/j.solener.2019.04.024.
- C. J. Kobus and G. L. Wedekind, “An experimental investigation into forced, natural and combined forced and natural convective heat transfer from stationary isothermal circular disks,” Int. J. Heat Mass Transf., vol. 38, no. 18, pp. 3329–3339, 1995. DOI: https://doi.org/10.1016/0017-9310(95)00096-R.
- C. Kobus and G. Shumway, “An experimental investigation into impinging forced convection heat transfer from stationary isothermal circular disks,” Int. J. Heat Mass Transf., vol. 49, no. 1–2, pp. 411–414, Sept. 2005. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2005.07.014.
- A. Gupta, P. Mishra and R. Chhabra, “Momentum and heat transfer characteristics of a thin circular disk in Bingham plastic fluids,” Numer. Heat Transf. Part A Appl., vol. 72, no. 11, pp. 1–25, 2017. DOI: https://doi.org/10.1080/10407782.2017.1412219.
- P. Mishra, S. A. Patel, M. Trivedi and R. P. Chhabra, “Effect of power-law fluid behavior on nusselt number of a circular disk in the forced convection regime,” J. Heat Transfer, vol. 141, no. 4, pp. 041701, Feb. 2019. DOI: https://doi.org/10.1115/1.4042784.
- G. Nasif, R. Balachandar and R. M. Barron, “CFD analysis of heat transfer due to jet impingement onto a heated disc bounded by a cylindrical wall,” Heat Transf. Eng., vol. 37, no. 17, pp. 1507–1520, Nov. 2016. DOI: https://doi.org/10.1080/01457632.2016.1145021.
- T. Defraeye, “Advanced computational modelling for drying processes—a review,” Appl. Energy, vol. 131, pp. 323–344, Oct. 2014. DOI: https://doi.org/10.1016/j.apenergy.2014.06.027.
- P. Caccavale, M. V. De Bonis and G. Ruocco, “Conjugate heat and mass transfer in drying: a modeling review,” J. Food Eng., vol. 176, pp. 28–35, May 2016. DOI: https://doi.org/10.1016/j.jfoodeng.2015.08.031.
- T. Defraeye and A. Radu, “Convective drying of fruit: A deeper look at the air-material interface by conjugate modeling,” Int. J. Heat Mass Transf., vol. 108, pp. 1610–1622, May 2017. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.01.002.
- J. Ostanek and K. Ileleji, “Conjugate heat and mass transfer model for predicting thin-layer drying uniformity in a compact, crossflow dehydrator,” Dry. Technol., vol. 38, no. 5–6, pp. 1–18, 2019. DOI: https://doi.org/10.1080/07373937.2019.1590394.
- M. Vanierschot, J. Timmermans and E. Van den Bulck, “Application of particle image velocimetry (PIV) in the study of perforated plate wake flow,” presented at the 2nd Optimess Conference, Apr. 3, 2012, Antwerp, Belgium.
- S. I. Ahamad and C. Balaji, “A simple thermal model for mixed convection from protruding heat sources,” Heat Transf. Eng., vol. 36, no. 4, pp. 396–407, 2015. DOI: https://doi.org/10.1080/01457632.2014.923984.
- B. Blocken, T. Defraeye, D. Derome and J. Carmeliet, “High-resolution CFD simulations for forced convective heat transfer coefficients at the facade of a low-rise building,” Build. Environ., vol. 44, no. 12, pp. 2396–2412, 2009. DOI: https://doi.org/10.1016/j.buildenv.2009.04.004.
- T. Defraeye, P. Verboven and B. Nicolai, “CFD modelling of flow and scalar exchange of spherical food products: Turbulence and boundary-layer modelling,” J. Food Eng., vol. 114, no. 4, pp. 495–504, 2013. DOI: https://doi.org/10.1016/j.jfoodeng.2012.09.003.
- W. A. Aregawi, T. Defraeye, P. Verboven, E. Herremans, G. De Roeck and B. M. Nicolai, “Modeling of coupled water transport and large deformation during dehydration of apple tissue,” Food Bioprocess Technol., vol. 6, no. 8, pp. 1963–1978, Aug. 2013. DOI: https://doi.org/10.1007/s11947-012-0862-1.
- N. A. G. C. D, Papageorgakis, “Comparison of linear and nonlinear RNG-Based k-epsilon models for incompressible turbulent flows,” Numer. Heat Transf. Part B Fundam., vol. 35, no. 1, pp. 1–22, Feb. 1999. DOI: https://doi.org/10.1080/104077999275983.
- S. Ferrouillat, P. Tochon, C. Garnier and H. Peerhossaini, “Intensification of heat-transfer and mixing in multifunctional heat exchangers by artificially generated streamwise vorticity,” Appl. Therm. Eng., vol. 26, no. 16, pp. 1820–1829, 2006. DOI: https://doi.org/10.1016/j.applthermaleng.2006.02.002.
- P. J. Roache, “Perspective: a method for uniform reporting of grid refinement studies,” J. Fluids Eng., vol. 116, no. 3, pp. 405–413, Sept. 1994. DOI: https://doi.org/10.1115/1.2910291.
- J. Wen, Y. Fu, X. Bao, Y. Liu and G. Xu, “Flow resistance and convective heat transfer performances of airflow through helical-tube bundles,” Int. J. Heat Mass Transf., vol. 130, pp. 778–786, Mar. 2019. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2018.10.129.
- Y. A. Cengel, and A. J. Ghajar and H. and Mass Transfer, Fundamentals and Applications, 6th edition in SI units. New York, NY: McGraw-Hill, 2020.
- T. Defraeye, “Convective heat and mass transfer at exterior building surfaces,” Departement Burgerlijke Bouwkunde, Faculteit Ingenieurswetenschappen, Katholieke Universiteit Leuven, Leuven, België, 2011.
- E. R. Meinders and K. Hanjalić, “Vortex structure and heat transfer in turbulent flow over a wall-mounted matrix of cubes,” Int. J. Heat Fluid Flow, vol. 20, no. 3, pp. 255–267, 1999. DOI: https://doi.org/10.1016/S0142-727X(99)00016-8.