References
- O. E. Turgut and M. Asker, “Saturated flow boiling heat transfer correlation for carbon dioxide for horizontal smooth tubes,” Heat Mass Transf., vol. 53, no. 6, pp. 2165–2185, 2017. DOI: https://doi.org/10.1007/s00231-017-1975-x.
- M. M. Awad and Y. S. Muzychka, “Two-phase flow modeling in microchannels and minichannels,” Heat Transf. Eng., vol. 31, no. 13, pp. 1023–1033, 2010. DOI: https://doi.org/10.1080/01457631003639059.
- C. B. Tibirica and G. Ribatski, “Flow boiling phenomenological differences between micro-and macroscale channels,” Heat Transf. Eng., vol. 36, no. 11, pp. 937–942, 2014. DOI: https://doi.org/10.1080/01457632.2015.972726.
- S. G. Kandlikar, “Similarities and Differences Between Flow Boiling in Microchannels and Pool Boiling,” Heat Transf. Eng., vol. 31, no. 3, pp. 159–167, 2010. DOI: https://doi.org/10.1080/01457630903304335.
- J. B. Copetti, B. de Sá Bekerle, M. H. Macagnan, J. C. Passos and J. D. de Oliveira, “Flow boiling heat transfer characteristics of R600a in multiport minichannel,” Heat Transf. Eng., vol. 38, no. 3, pp. 323–331, 2016. DOI: https://doi.org/10.1080/01457632.2016.1189271.
- V. V. Kuznetsov, A. S. Shamirzaev, I. A. Kozulin and S. P. Kozlov, “Correlation of the flow pattern and flow boiling heat transfer in microchannels,” Heat Transf. Eng., vol. 34, no. 2–3, pp. 235–245, 2012. DOI: https://doi.org/10.1080/01457632.2013.703564.
- P. I. Shyamkumar, S. Singh, A. Srivastava and M. Visaria, “Numerical investigation of nucleate pool boiling heat transfer for different superheat conditions,” Heat Transf. Eng., vol. 43, no. 1, pp. 1–18, 2020. DOI: https://doi.org/10.1080/01457632.2020.1844450.
- D. Steiner and J. Taborek, “Flow boiling heat transfer in vertical tubes correlated by an asymptotic model,” Heat Transf. Eng., vol. 13, no. 2, pp. 43–68, 1992. DOI: https://doi.org/10.1080/01457639208939774.
- A. K. Das, P. K. Das and P. Saha, “Applicability of a mechanistic model for the prediction of boiling heat transfer for refrigerants,” Heat Transf. Eng., vol. 31, no. 5, pp. 374–382, 2010. DOI: https://doi.org/10.1080/01457630903373173.
- J. R. Thome, L. Cheng, G. Ribatski and L. F. Vales, “Flow boiling of ammonia and hydrocarbons: A state-of-the-art review,” Int. J. Refrig., vol. 31, no. 4, pp. 603–620, 2008. DOI: https://doi.org/10.1016/j.ijrefrig.2007.11.010.
- X. Fang, et al., “Saturated flow boiling heat transfer: Review and assessment of prediction methods,” Heat Mass Transf., vol. 55, no. 1, pp. 197–222, 2018. DOI: https://doi.org/10.1007/s00231-018-2432-1.
- M. M. Shah, “Heat transfer and pressure drop in ammonia evaporators,” ASHRAE Trans., vol. 80, no. 2, pp. 238–254, 1974.
- M. M. Shah, “Heat transfer, pressure drop, visual observation, test data for ammonia evaporation inside pipes,” ASHRAE Trans., vol. 84, no. 2, pp. 238–259, 1978.
- J. Chaddock and G. Buzzard, “Film coefficients for in-tube evaporation of ammonia and R-502 with and without small percentages of mineral oil,” ASHRAE Trans., vol. 92, no. 1, pp. 22–40, 1986.
- O. ZüRcher, J. R. Thome and D. Favrat, “Evaporation of ammonia in a smooth horizontal tube: heat transfer measurements and predictions,” J. Heat Transf., vol. 121, no. 1, pp. 89–101, 1999. DOI: https://doi.org/10.1115/1.2825974.
- A. S. Pamitran, K. I. Choi and J. T. Oh, and Nasruddin, “Evaporation heat transfer coefficient in singular circular small tubes for flow natural refrigerants of C3H8, NH3, and CO2,” Int. J. Multiph. Flow, vol. 37, no. 7, pp. 794–801, 2011. DOI: https://doi.org/10.1016/j.ijmultiphaseflow.2011.02.005.
- M. H. Maqbool, B. Palm and R. Khodabandeh, “Boiling heat transfer of ammonia in vertical smooth mini channels: Experimental results and predictions,” Int. J. Therm. Sci, vol. 54, pp. 13–21, 2012. DOI: https://doi.org/10.1016/j.ijthermalsci.2011.09.012.
- H. Wang and X. Fang, “Evaluation analysis of correlations of flow boiling heat transfer coefficients applied to ammonia,” Heat Transf. Eng., vol. 37, no. 1, pp. 32–44, Jul. 2015. DOI: https://doi.org/10.1080/01457632.2015.1025006.
- S. G. Kandlikar, “A model for predicting the two-phase flow boiling heat transfer coefficient in augmented tube and compact heat exchanger geometries,” J. Heat Transf., vol. 113, no. 4, pp. 966–972, 1991. DOI: https://doi.org/10.1115/1.2911229.
- Y. Gao, S. Shao, B. Zhan, Y. Chen and C. Tian, “Heat transfer and pressure drop characteristics of ammonia during flow boiling inside a horizontal small diameter tube,” Int. J. Heat Mass Transf., vol. 127, pp. 981–996, 2018. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2018.07.137.
- Y. Gao, S. Shao, B. Zhan, Y. Chen and C. Tian, “Heat transfer and pressure drop characteristics of ammonia/miscible oil mixture during flow boiling in an 8 mm horizontal smooth tube,” Int. J. Therm. Sci., vol. 138, pp. 341–350, 2019. DOI: https://doi.org/10.1016/j.ijthermalsci.2018.12.040.
- D. Sterner and B. Sunden, “Performance of plate heat exchangers for evaporation of ammonia,” Heat Transf. Eng., vol. 27, no. 5, pp. 45–55, 2007. DOI: https://doi.org/10.1080/01457630600559611.
- M. Y. Wen and C. Y. Ho, “Evaporation heat transfer and pressure drop characteristics of R-290 (propane), R-600 (butane), and a mixture of R-290/R-600 in the three-line serpentine small-tube bank,” Appl. Therm. Eng., vol. 25, no. 17–18, pp. 2921–2936, 2005. DOI: https://doi.org/10.1016/j.applthermaleng.2005.02.013.
- Z. Anwar, B. Palm and R. Khodabandeh, “Flow boiling heat transfer and dryout characteristics of R600a in a vertical mini-channel,” Heat Transf. Eng., vol. 36, no. 14–15, pp. 1230–1240, 2015. DOI: https://doi.org/10.1080/01457632.2015.994965.
- J. D. de Oliveira, J. B. Copetti and J. C. Passos, “An experimental investigation on flow boiling heat transfer of R600a in a horizontal small tube,” Int. J. Refrig., vol. 72, pp. 97–110, 2016. DOI: https://doi.org/10.1016/j.ijrefrig.2016.08.001.
- F. T. Kanizawa, C. B. Tibirica and G. Ribatski, “Heat Transfer during convective boiling inside microchannels,” Int. J. Heat Mass Transf., vol. 93, pp. 566–583, 2016. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2015.09.083.
- J. P. Wattelet, J. C. Chato, A. L. Souza and B. R. Christoffersen, “Evaporative characteristics of R-12, R-134a, and mixture at low mass fluxes,” ASHRAE Trans., vol. 100, pp. 603–615, 1994.
- X. Fang, Q. Wu and Y. Yuan, “A general correlation for saturated flow boiling heat transfer in channels of various sizes and flow directions,” Int. J. Heat Mass Transf., vol. 107, pp. 972–981, 2017. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.10.125.
- Z. Anwar, “Flow boiling heat transfer characteristics of R600A and R290 in vertical mini-channels,” JFET, vol. 21, no. 2, pp. 164–181, 2014.
- J. B. Copetti, M. H. Macagnan and F. Zinani, “Experimental study on R-600a boiling in 2.6 mm tube,” Int. J. Refrig., vol. 36, no. 2, pp. 325–334, 2013. DOI: https://doi.org/10.1016/j.ijrefrig.2012.09.007.
- J. Qiu, et al., “Experimental investigation of flow boiling heat transfer and pressure drops characteristics of R1234ze(E), R600a, and a mixture of R1234ze(E)/R32 in a horizontal tube,” Adv. Mech. Eng., vol. 7, no. 9, pp. 1–12, 2015. DOI: https://doi.org/10.1177/1687814015606311.
- D. F. Sempertegui-Tapia and G. Ribatski, “Flow boiling heat transfer and two-phase pressure drop of isobutane in a 1.1 mm diameter tube,” Proc. 23rd ABCM Int. Cong. of Mechanical Engineering, Rio De Janeiro, Dec. 2015, Brazil.
- Z. Yang, M. Gong, G. Chen, X. Zou and J. Shen, “Two-phase flow patterns, heat transfer and pressure drop characteristics of R600a during flow boiling inside a horizontal tube,” Appl. Therm. Eng., vol. 120, pp. 654–671, 2017. DOI: https://doi.org/10.1016/j.applthermaleng.2017.03.124.
- Y. A. Cengel and A. J. Ghajar, Heat and Mass Transfer: Fundamentals & Applications, 6th ed. New York: McGraw-Hill Education, 2020,
- V. Gnielinski, “New equations for heat and mass transfer in turbulent pipe and channel flow,” Int. Chem. Eng., vol. 16, no. 2, pp. 359–368, 1976.
- K. E. Gungor and R. H. S. Winterton, “Simplified general correlation for saturated flow boiling and comparisons of correlations with data,” Chem. Eng. Res. Des., vol. 65, no. 2, pp. 148–156, 1987.
- P. A. Kew and K. Cornwell, “Correlations for the prediction of boiling heat transfer in small-diameter channels,” Appl. Therm. Eng, vol. 17, no. 8–10, pp. 705–715, 1997. DOI: https://doi.org/10.1016/S1359-4311(96)00071-3.
- D. B. R. Kenning and M. G. Cooper, “Saturated flow boiling of water in vertical tubes,” Int. J. Heat Mass Transf., vol. 32, no. 3, pp. 445–458, 1989. DOI: https://doi.org/10.1016/0017-9310(89)90132-4.
- W. Li and Z. Wu, “A general correlation for evaporative heat transfer in micro/mini channels,” Int. J. Heat Mass Transf., vol. 53, no. 9–10, pp. 1778–1787, 2010. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2010.01.012.
- Z. Liu and R. H. S. Winterton, “A general correlation for saturated and subcooled flow boiling in tubes and annuli, based on a nucleate pool boiling,” Int. J. Heat Mass Transf, vol. 34, no. 11, pp. 2759–2766, 1991. DOI: https://doi.org/10.1016/0017-9310(91)90234-6.
- J. C. Chen, “Correlation for boiling heat transfer to saturated fluids in convective flow,” Ind. Eng. Chem. Proc. Des. Dev., vol. 5, no. 3, pp. 322–329, 1966. DOI: https://doi.org/10.1021/i260019a023.
- K. E. Gungor and R. H. S. Winterton, “General correlation for flow boiling in tubes and annuli,” Int. J. Heat Mass Transf., vol. 29, no. 3, pp. 351–358, 1986. DOI: https://doi.org/10.1016/0017-9310(86)90205-X.
- D. S. Jung, M. McLinden, R. Radermacher and D. Didion, “A study of flow boiling heat transfer with refrigerant mixtures,” Int. J. Heat Mass Transf., vol. 32, no. 9, pp. 1751–1764, 1989. DOI: https://doi.org/10.1016/0017-9310(89)90057-4.
- K. I. Choi, A. S. Pamitran and J. T. Oh, “Two phase flow heat transfer of CO2 vaporization in smooth horizontal minichannels,” Int. J. Refrig., vol. 30, no. 5, pp. 767–777, 2007. DOI: https://doi.org/10.1016/j.ijrefrig.2006.12.006.
- S. G. Kandlikar, “A general correlation for two-phase flow boiling heat transfer inside horizontal and vertical tubes,” J. Heat Transf., vol. 112, no. 1, pp. 219–228, 1990. DOI: https://doi.org/10.1115/1.2910348.
- M. M. Shah, “Chart correlation for saturated boiling heat transfer: Equation and further study,” ASHRAE Trans., vol. 88, no. 1, pp. 185–196, 1982.
- M. Ducoulombier, S. Colasson, J. Bonjour and P. Haberschill, “Carbon dioxide flow boiling in a single microchannel – part II: Heat transfer,” Exp. Therm. Fluid Sci., vol. 35, no. 4, pp. 597–611, 2011. DOI: https://doi.org/10.1016/j.expthermflusci.2010.11.014.
- L. Sun and K. Mishima, “An evaluation of prediction methods for saturated flow boiling heat transfer in mini-channels,” Int. J. Heat Mass Transf., vol. 52, no. 23–24, pp. 5323–5329, 2009. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2009.06.041.
- M. G. Cooper, “Heat flow rates in saturated nucleate pool boiling – a wide ranging examination using reduced properties,” Adv. Heat Transf., vol. 16, pp. 157–239, 1984. DOI: https://doi.org/10.1016/S0065-2717(08)70205-3.
- G. M. Lazarek and S. H. Black, “Evaporative heat transfer, pressure drop and critical heat flux in a small vertical tube with R-113,” Int. J. Heat Mass Transf., vol. 25, no. 7, pp. 945–959, 1982. DOI: https://doi.org/10.1016/0017-9310(82)90070-9.
- L. Cheng, G. Ribatski and J. R. Thome, “New prediction methods for CO2 evaporation inside tubes: Part II – an updated general flow boiling heat transfer model based on flow patterns,” Int. J. Heat Mass Transf., vol. 51, no. 1–2, pp. 125–135, 2008. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2007.04.001.
- J. R. Thome, V. Dupont and A. M. Jacobi, “Heat transfer model for evaporation in microchannels, part I: Presentation of the model,” Int. J. Heat Mass Transf., vol. 47, no. 14–16, pp. 3375–3385, 2004. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2004.01.006.
- E. W. Lemmon, M. O. McLinden and M. L. Huber, “REFPROP. NIST Standard Reference,” Database 23, Version 7.1, 2003.
- X. Fang, Z. Zhou and H. Wang, “Heat transfer correlation for saturated flow boiling of water,” Appl. Therm. Eng., vol. 76, pp. 147–156, 2015. DOI: https://doi.org/10.1016/j.applthermaleng.2014.11.024.
- M. C. Diaz and J. Schmidt, “Experimental investigation of transient boiling heat transfer in microchannels,” Int. J. Heat Fluid Flow, vol. 28, no. 1, pp. 95–102, 2007. DOI: https://doi.org/10.1016/j.ijheatfluidflow.2006.05.008.
- M. Hamdar, A. Zoughaib and C. Colic, “Flow boiling heat transfer and pressure drop of pure HFC-152a in a horizontal mini-channel,” Int. J. Refrig., vol. 33, no. 3, pp. 566–577, May 2010. DOI: https://doi.org/10.1016/j.ijrefrig.2009.12.006.
- X. Fang, “A new correlation of flow boiling heat transfer coefficient based on R134a data,” Int. J. Heat Mass Transf., vol. 66, pp. 279–283, 2013. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2013.07.015.
- X. Fang, “A new correlation of flow boiling heat transfer coefficients for carbon dioxide,” Int. J. Heat Mass Transf., vol. 64, pp. 802–807, 2013. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2013.05.024.
- S. Tanaka, H. Daiguji, F. Takemuka and E. Hihara, “Boiling heat transfer of carbon-dioxide in horizontal tubes,” In: Proc. of 38th National Heat Transfer Symposium of Japan, Saitama, Japan, pp. 899–900, 2001.
- A. A. Heidari, et al., “Harris hawks optimization: Algorithm and applications,” Future Gener. Comput. Syst., vol. 97, pp. 849–872, 2019. DOI: https://doi.org/10.1016/j.future.2019.02.028.