Microfiber Textiles of Adsorbing Materials for Heat Transformations

References

• H. Jouhara, et al., “Waste heat recovery technologies and applications,” Therm. Sci. Eng. Prog., vol. 6, pp. 268–289, 2018. DOI: 10.1016/j.tsep.2018.04.017.
   Google Scholar
• M. Papapetrou, G. Kosmadakis, A. Cipollina, U. L. Commare and G. Micale, “Industrial waste heat: Estimation of the technically available resource in the EU per industrial sector, temperature level and country,” Appl. Therm. Eng., vol. 138, pp. 207–216, 2018. DOI: 10.1016/j.applthermaleng.2018.04.043.
   Web of Science ®Google Scholar
• R. Agathokleous, et al., “Waste heat recovery in the EU industry and proposed new technologies,” Energy Procedia, vol. 161, pp. 489–496, 2019. DOI: 10.1016/j.egypro.2019.02.064.
   Google Scholar
• A. Bloess, W. P. Schill and A. Zerrahn, “Power-to-heat for renewable energy integration: A review of technologies, modeling approaches, and flexibility potentials,” Appl. Energy, vol. 212, pp. 1611–1626, 2018. DOI: 10.1016/j.apenergy.2017.12.073.
   Web of Science ®Google Scholar
• J. Ziemele, R. Kalnins, G. Vigants, E. Vigants and I. Veidenbergs, “Evaluation of the industrial waste heat potential for its recovery and integration into a fourth generation district heating system,” Energy Procedia, vol. 147, pp. 315–321, 2018. DOI: 10.1016/j.egypro.2018.07.098.
   Google Scholar
• K. C. Amanul Alam, R. A. Rouf, B. Baran Saha, M. A. Hakim Khan and F. Meunier, “Autonomous adsorption cooling – driven by heat storage collected from solar heat,” Heat Transf. Eng., vol. 37, no. 7–8, pp. 640–649, 2016. DOI: 10.1080/01457632.2015.1067045.
   Web of Science ®Google Scholar
• L. Shere, S. Trivedi, S. Roberts, A. Sciacovelli and Y. Ding, “Synthesis and characterization of thermochemical storage material combining porous zeolite and inorganic salts,” Heat Transf. Eng, vol. 40, no. 13–14, pp. 1176–1181, 2019. DOI: 10.1080/01457632.2018.1457266.
   Web of Science ®Google Scholar
• R. A. Rouf, K. C. A. Alam, B. B. Saha and K. M. A. Kabir, “Utilizing accessible heat enhancing cooling effect with three bed solar adsorption chiller,” Heat Transf. Eng, vol. 40, no. 12, pp. 1049–1059, 2019. DOI: 10.1080/01457632.2018.1451244.
   Web of Science ®Google Scholar
• T. S. Ge, et al., “Solar heating and cooling: present and future development,” Renew. Energy, vol. 126, pp. 1126–1140, 2018. DOI: 10.1016/j.renene.2017.06.081.
   Web of Science ®Google Scholar
• J. M. Pinheiro, S. Salústio, J. Rocha, A. A. Valente and C. M. Silva, “Adsorption heat pumps for heating applications,” Renew. Sustain. Energy Rev., vol. 119, pp. 109528–109552, 2020. DOI: 10.1016/j.rser.2019.109528.
   Web of Science ®Google Scholar
• F. Kuznik, K. Johannes, C. Obrecht and D. David, “A review on recent developments in physisorption thermal energy storage for building applications,” Renew. Sustain. Energy Rev., vol. 94, pp. 576–586, 2018. DOI: 10.1016/j.rser.2018.06.038.
   Web of Science ®Google Scholar
• T. Miyazaki, B. Baran Saha and S. Koyama, “Analytical model of a combined adsorption cooling and mechanical vapor compression refrigeration system,” Heat Transf. Eng., vol. 38, no. 4, pp. 423–430, 2017. DOI: 10.1080/01457632.2016.1195135.
   Web of Science ®Google Scholar
• I. S. Girnik and Y. I. Aristov, “Making adsorptive chillers more fast and efficient: The effect of bi-dispersed adsorbent bed,” Appl. Therm. Eng., vol. 106, pp. 254–256, 2016. DOI: 10.1016/j.applthermaleng.2016.06.016.
   Web of Science ®Google Scholar
• S. Mitra, M. Muttakin, K. Thu and B. B. Saha, “Study on the influence of adsorbent particle size and heat exchanger aspect ratio on dynamic adsorption characteristics,” Appl. Therm. Eng, vol. 133, pp. 764–773, 2018. DOI: 10.1016/j.applthermaleng.2018.01.015.
   Web of Science ®Google Scholar
• J. M. S. Dias and V. A. F. Costa, “Adsorption heat pumps for heating applications: a review of current state, literature gaps and development challenges,” Renew. Sustain. Energy Rev., vol. 98, pp. 317–327, 2018. DOI: 10.1016/j.rser.2018.09.026.
   Web of Science ®Google Scholar
• S. Stefański, Ł. Mika, K. Sztekler, W. Kalawa, Ł. Lis and W. Nowak, “Adsorption bed configurations for adsorption cooling application,” E3S Web Conf., vol. 108, pp. 01010–01020, 2019. DOI: 10.1051/e3sconf/201910801010.
   Google Scholar
• N. Mat Wajid, B. Mompuouo, S. Omer and S. B. Riffat, “Review of heat and mass transfer enhancement techniques and current advancement for adsorption heating/cooling systems,” Int. J. Low-Carbon Technol., vol. 14, no. 4, pp. 461–467, 2019. DOI: 10.1093/ijlct/ctw010.
   Web of Science ®Google Scholar
• L. F. Cabeza, A. Solé and C. Barreneche, “Review on sorption materials and technologies for heat pumps and thermal energy storage,” Renew. Energy, vol. 110, pp. 3–39, 2017. DOI: 10.1016/j.renene.2016.09.059.
   Web of Science ®Google Scholar
• S. K. Henninger, et al., “New materials for adsorption heat transformation and storage,” Renew. Energy, vol. 110, pp. 59–68, 2017. DOI: 10.1016/j.renene.2016.08.041.
   Web of Science ®Google Scholar
• A. Freni, et al., Characterization of Zeolite-Based Coatings for Adsorption Heat Pumps, Heidelberg: Springer International Publishing, Cham, Switzerland, 2015. DOI: 10.1007/978-3-319-09327-7.
   Google Scholar
• L. Calabrese, L. Bonaccorsi, P. Bruzzaniti, E. Proverbio and A. Freni, “SAPO-34 based zeolite coatings for adsorption heat pumps,” Energy, vol. 187, pp. 115981–115989, 2019. DOI: 10.1016/j.energy.2019.115981.
   Web of Science ®Google Scholar
• U. Wittstadt, et al., “A novel adsorption module with fiber heat exchangers: performance analysis based on driving temperature differences,” Renew. Energy, vol. 110, pp. 154–161, 2017. DOI: 10.1016/j.renene.2016.08.061.
   Web of Science ®Google Scholar
• L. Bonaccorsi, A. Fotia, A. Malara and P. Frontera, “Advanced adsorbent materials for waste energy recovery,” Energies, vol. 13, no. 17, pp. 4299–4314, 2020. DOI: 10.3390/en13174299.
   Web of Science ®Google Scholar
• P. Frontera, et al., “A new approach to the synthesis of titania nano-powders enriched with very high contents of carbon nanotubes by electro-spinning,” Mater. Chem. Phys., vol. 153, pp. 338–345, 2015. DOI: 10.1016/j.matchemphys.2015.01.023.
   Web of Science ®Google Scholar
• A. Malara, P. Frontera, L. Bonaccorsi and P. L. Antonucci, “Hybrid zeolite SAPO-34 fibers made by electrospinning,” Materials, vol. 11, no. 12, pp. 1–13, 2018. DOI: 10.3390/ma1112.
   Web of Science ®Google Scholar
• A. Freni, L. Calabrese, A. Malara, P. Frontera and L. Bonaccorsi, “Silica gel microfibers by electrospinning for adsorption chillers,” Energy, vol. 187, pp. 115971–115978, 2019. DOI: 10.1016/j.energy.2019.115971.
   Web of Science ®Google Scholar
• P. Frontera, A. Malara, L. Bonaccorsi and P. L. Antonucci, Metodo per la realizzazione dello scambiatore di calore di una macchina termica ad adsorbimento e rispettiva macchina termica, Nr.102018000003884, EP19164536.5, patent pending, 102018000003884 del 22-mar-2018, EP19164536.5, 2018.
   Google Scholar
• P. Frontera, M. Kumita, A. Malara, J. Nishizawa and L. Bonaccorsi, “Manufacturing and assessment of electrospun PVP/TEOS microfibers for adsorptive heat transformers,” Coatings, vol. 9, no. 7, pp. 443–455, 2019. DOI: 10.3390/coatings9070443.
   Web of Science ®Google Scholar
• C. J. Angammana and S. H. Jayaram, “Fundamentals of electrospinning and processing technologies,” Part. Sci. Technol, vol. 34, no. 1, pp. 72–82, 2016. DOI: 10.1080/02726351.2015.1043678.
   Web of Science ®Google Scholar
• T.-H. Eun, H.-K. Song, J. H. Han, K.-H. Lee and J.-N. Kim, “Enhancement of heat and mass transfer in silica-expanded graphite composite blocks for adsorption heat pumps. Part II. Cooling system using the composite blocks,” Int. J. Refrig., vol. 23, no. 1, pp. 74–81, 2000. DOI: 10.1016/S0140-7007(99)00036-5.
   Web of Science ®Google Scholar
• F. Mauriello, M. Armandi, B. Bonelli, B. Onida and E. Garrone, “H-Bonding of Furan and its hydrogenated derivatives with the isolated hydroxyl of amorphous silica: an IR spectroscopic and thermodynamic study,” J. Phys. Chem. C, vol. 114, no. 42, pp. 18233–18239, 2010. DOI: 10.1021/jp106746a.
   Web of Science ®Google Scholar
• M. Zündel, E. Mazza and A. E. Ehret, “A 2.5D approach to the mechanics of electrospun fibre mats,” Soft Matter, vol. 13, no. 37, pp. 6407–6421, 2017. DOI: 10.1039/c7sm01241a.
   PubMed Web of Science ®Google Scholar
• L. Bonaccorsi, et al., “Synthesis of SAPO-34/graphite composites for low temperature heat adsorption pumps,” J. Energy Chem, vol. 22, no. 2, pp. 245–250, 2013. DOI: 10.1016/S2095-4956(13)60030-3.
   Web of Science ®Google Scholar
• A. Malara, et al., “Sustainable exploitation of coffee silverskin in water remediation,” Sustain, vol. 10, no. 10, pp. 3547–3558, 2018. DOI: 10.3390/su10103547.
   Web of Science ®Google Scholar
• L. Persano, A. Camposeo, C. Tekmen and D. Pisignano, “Industrial upscaling of electrospinning and applications of polymer nanofibers: A review,” Macromol. Mater. Eng., vol. 298, no. 5, pp. 504–520, 2013. DOI: 10.1002/mame.201200290.
   Web of Science ®Google Scholar
• M. Shahhosseininia, S. Bazgir and M. D. Joupari, “Fabrication and investigation of silica nanofibers via electrospinning,” Mater. Sci. Eng. C Mater. Biol. Appl., vol. 91, pp. 502–511, 2018. DOI: 10.1016/j.msec.2018.05.068.
   PubMed Web of Science ®Google Scholar
• S. Chen, Z. Yang and F. Wang, “Investigation on the properties of PMMA/reactive halloysite nanocomposites based on halloysite with double bonds,” Polymers, vol. 10, no. 8, pp. 919–934, 2018. DOI: 10.3390/polym10080919.
   Web of Science ®Google Scholar
• M. N. Silberstein, C. L. Pai, G. C. Rutledge and M. C. Boyce, “Elasticplastic behavior of non-woven fibrous mats,” J. Mech. Phys. Solids, vol. 60, no. 2, pp. 295–318, 2012. DOI: 10.1016/j.jmps.2011.10.007.
   Web of Science ®Google Scholar