Design of a Numerical Simulator for Finned-Tube Heat Exchangers with Arbitrary Circuitry

References

• R. Brignoli, J. S. Brown, H. M. Skye, and P. A. Domanski, “Refrigerant performance evaluation including effects of transport properties and optimized heat exchangers,” Int. J. Refrig., vol. 80, pp. 52–65, Aug. 2017. DOI: 10.1016/j.ijrefrig.2017.05.014.
   PubMed Web of Science ®Google Scholar
• P. A. Domanski and D. Yashar, “Comparable performance evaluation of HC and HFC refrigerants in an optimized system,” presented at the 7th IIR Gustav Lorentzen Conference on Natural Working Fluids, Trondheim, Norway, May 28–31, 2006.
   Google Scholar
• M. Chwalowski, D. Didion, and P. Domanski, “Verification on evaporator computer models and analysis of an evaporator coil,” presented at the ASHRAE Winter Meeting, Illinois, USA, Jan. 28–Feb. 1, 1989.
   Google Scholar
• C. C. Wang, J. Y. Jang, C. C. Lai, and Y. J. Chang, “Effect of circuit arrangement on the performance of air-cooled condensers,” Int. J. Refrig., vol. 22, no. 4, pp. 275–282, Jun. 1999. DOI: 10.1016/S0140-7007(98)00065-6.
   Web of Science ®Google Scholar
• G. Bigot, L. Palandre, and D. Clodic, “Optimized design of heat exchangers for “reversible” heat pump using R-407C,” presented at the Eighth Int. Refrig. and Air Cond. Conf., Purdue University, West Lafayette, Indiana, USA, Jul. 25–28, 2000.
   Google Scholar
• S. Y. Liang, T. N. Wong, and G. K. Nathan, “Numerical and experimental studies of refrigerant circuitry of evaporator coils,” Int. J. Refrig., vol. 24, no. 8, pp. 823–833, Dec. 2001. DOI: 10.1016/S0140-7007(00)00050-5.
   Web of Science ®Google Scholar
• C. M. Joppolo, L. Molinaroli, and A. Pasini, “Numerical analysis of the influence of circuit arrangement on a fin-and-tube condenser performance,” Case Stud. Therm. Eng., vol. 6, pp. 136–146, Sept. 2015. DOI: 10.1016/j.csite.2015.09.002.
   Web of Science ®Google Scholar
• P. A. Domanski and D. Yashar, “Optimization of finned-tube condensers using an intelligent system,” Int. J. Refrig., vol. 30, no. 3, pp. 482–488, May 2007. DOI: 10.1016/j.ijrefrig.2006.08.013.
   Web of Science ®Google Scholar
• A. Bensafi, S. Borg, and D. Parent, “CYRANO: a computational model for the detailed design of plate-fin-and-tube heat exchangers using pure and mixed refrigerant,” Int. J. Refrig., vol. 20, no. 3, pp. 218–228, May 1997. DOI: 10.1016/S0140-7007(96)00052-7.
   Web of Science ®Google Scholar
• A. Vardhan and P. L. Dhar, “A new procedure for performance prediction of air conditioning coils,” Int. J. Refrig., vol. 21, no. 1, pp. 77–83, 1998. DOI: 10.1016/S0140-7007(97)00020-0.
   Web of Science ®Google Scholar
• J. M. Corberan and M. G. Melon, “Modelling a plate finned evaporators and condensers working with R134A,” Int. J. Refrig., vol. 21, no. 4, pp. 273–284, Jun 1998. DOI: 10.1016/S0140-7007(97)00087-X.
   Web of Science ®Google Scholar
• P. A. Domanski, “Finned-tube evaporator model with a visual interface,” presented at the Int. Cong. of Refrig, Sydney, Australia, Sept. 19–24, 1999.
   Google Scholar
• P. A. Domanski, EVAP-COND Simulation Models for Finned Tube Heat Exchangers, Gaithersburg, MD, USA: National Institute of Standards and Technology, Building and Fire Research Laboratory, 2003.
   Google Scholar
• P. A. Domanski, “Simulation of an evaporator with non-uniform one-dimensional air distribution,” presented at the ASHRAE Winter Meet, New York, USA, Jan. 19–23, 1991.
   Google Scholar
• J. H. Lee, S. W. Bae, K. H. Bang, and M. H. Kim, “Experimental and numerical research on condenser performance for R-22 and R407-C refrigerants,” Int. J. Refrig., vol. 25, no. 3, pp. 372–382, May 2002. DOI: 10.1016/S0140-7007(01)00012-3.
   Web of Science ®Google Scholar
• J. Liu et al., “A general steady state mathematical model for fin-and-tube heat exchanger based on graph theory,” Int. J. Refrig., vol. 27, no. 8, pp. 965–973, Dec. 2004. DOI: 10.1016/j.ijrefrig.2004.06.008.
   Web of Science ®Google Scholar
• H. Jiang, V. Aute, and R. Radermacher, “A user-friendly simulation and optimization tool for design of coils,” presented at the Int. Refrig. and Air Cond. Conf., West Lafayette, Indiana, USA, Purdue University, Jul. 16–19, 2002.
   Google Scholar
• H. Jiang, V. Aute, and R. Radermacher, “CoilDesigner: a general-purpose simulation and design tool for air-to-refrigerant heat exchangers,” Int. J. Refrig., vol. 29, no. 4, pp. 601–610, Jun. 2006. DOI: 10.1016/j.ijrefrig.2005.09.019.
   Web of Science ®Google Scholar
• V. Singh, V. Aute, and R. Radermacher, “Numerical approach for modeling air-to-refrigerant fin-and-tube heat exchanger with tube-to-tube heat transfer,” Int. J. Refrig., vol. 31, no. 8, pp. 1414–1425, Dec. 2008. DOI: 10.1016/j.ijrefrig.2008.03.013.
   Web of Science ®Google Scholar
• V. Singh, V. Aute, and R. Radermacher, “A heat exchanger model for air-to-refrigerant fin-and tube heat exchanger with arbitrary fin sheet,” Int. J. Refrig., vol. 32, no. 7, pp. 1724–1735, Nov. 2009. DOI: 10.1016/j.ijrefrig.2009.05.011.
   Web of Science ®Google Scholar
• T. Bury and M. Hanuszkiewicz-Drapala, “Impact of heat transfer coefficient determination method on the simulation of the operation of fin-and-tube cross-flow heat exchangers at a non-uniform inflows of mediums,” Heat Trans. Eng., vol. 42, no. 3–4, pp. 191–204, Dec. 2021. DOI: 10.1080/01457632.2019.1699288.
   Web of Science ®Google Scholar
• R. Andrzejczyk, T. Muszynski, and P. Kozak, “Experimental and computational fluid dynamics studies on straight and U-bend double tube heat exchangers with active and passive enhancement methods,” Heat Trans. Eng., vol. 42, no. 3–4, pp. 167–180, Dec. 2021. DOI: 10.1080/01457632.2019.1699279.
   Web of Science ®Google Scholar
• C. Koushik and K. A. Prakash, “Steady and unsteady forced convective heat transfer analysis in 180 degree bend,” Heat Trans. Eng., vol. 41, no. 22, pp. 1901–1920, Oct. 2019. DOI: 10.1080/01457632.2019.1675248.
   Web of Science ®Google Scholar
• N. Ploskas, C. Laughman, A. U. Raghunathan, and N. Sahinidis, “Optimization of circuitry arrangements using derivative-free optimization,” Chem. Eng. Res. Des., vol. 131, pp. 16–28, May 2018. DOI: 10.1016/j.cherd.2017.05.015.
   Web of Science ®Google Scholar
• H. Müller-Steinhagen and K. Heck, “A simple friction pressure drop correlation for two-phase flow in pipes,” Chem. Eng. Process.: Process Intensif., vol. 20, no. 6, pp. 297–308, Nov.–Dec. 1986. DOI: 10.1016/0255-2701(86)80008-3.
   Web of Science ®Google Scholar
• R. W. Lockhart and R. C. Martinelli, “Proposed correlation of data for isothermal two-phase, two-component flow in pipes,” Chem. Eng. Prog., vol. 45, no. 1, pp. 39–48, 1949.
   Web of Science ®Google Scholar
• Y. A. Cengel and A. J. Ghajar, Heat and Mass Transfer: Fundamentals & Applications, 6th ed., New York, USA: McGraw- Hill Education, 2020.
   Google Scholar
• Y. Seshimo and M. Fujii, Compact Heat Exchangers. Tokyo, Japan: Nikkan Kogyo Shimbun, Ltd., 1992. (in Japanese)
   Google Scholar
• N. H. Kim, B. Youn, and R. L. Webb, “Air-side heat transfer and friction correlations for plain fin-and-tube heat exchangers with staggered tube arrangements,” J. Heat Transfer, Trans. ASME, vol. 121, no. 3, pp. 662–667, 1999. Aug. DOI: 10.1115/1.2826030.
   Web of Science ®Google Scholar
• F. W. Dittus and L. M. Boelter, “Heat transfer in automobile radiators of the tubular type,” Int. Commun. Heat Mass Transf, vol. 12, no. 1, pp. 3–22, Jan.–Feb. 1985. DOI: 10.1016/0735-1933(85)90003-X.
   Web of Science ®Google Scholar
• M. M. Shah, “Chart correlation for saturated boiling heat transfer: equations and further study,” presented at the ASHRAE Semiannu. Meet, Texas, USA, Jan. 24–28, 1982.
   Google Scholar
• A. Cavallini et al., “Condensation inside and outside smooth and enchanced tubes – a review of recent research,” Int. J. Refrig., vol. 26, no. 4, pp. 373–392, Jun. 2003. DOI: 10.1016/S0140-7007(02)00150-0.
   Web of Science ®Google Scholar
• E. W. Lemmon, I. H. Bell, M. L. Huber, and M. O. McLinden, NIST Standard Reference Database 23: Reference Fluid Thermodynamic and Transport Properties – REFPROP, Version 10.0, National Institute of Standards and Technology, Standard Reference Data Program, Gaithersburg, 2018.
   Google Scholar
• H. Jiang, “Development of a simulation and optimization tool for heat exchanger design,” Ph.D. dissertation, University of Maryland, College Park, Maryland, USA, 2003.
   Google Scholar
• N. Srinivas and K. Deb, “Multi-objective optimization using non-dominated sorting in genetic algorithms,” Evol. Comput., vol. 2, no. 3, pp. 221–248, Sep. 1994. DOI: 10.1162/evco.1994.2.3.221.
   Web of Science ®Google Scholar
• S. Sanaye and H. Hajabdollahi, “Thermal-economic multi-objective optimization of plate fin heat exchanger using genetic algorithm,” Appl. Energy, vol. 87, no. 6, pp. 1893–1902, Jun. 2010. DOI: 10.1016/j.apenergy.2009.11.016.
   Web of Science ®Google Scholar
• G. N. Xie, B. Sunden, and Q. W. Wang, “Optimization of compact heat exchangers by a genetic algorithm,” Appl. Therm. Eng., vol. 28, no. 8–9, pp. 895–906, Jun 2008. DOI: 10.1016/j.applthermaleng.2007.07.008.
   Web of Science ®Google Scholar