References
- S. Eiamsa-Ard, K. Wongcharee, P. Eiamsa-Ard and C. Thianpong, “Heat transfer enhancement in a tube using delta-winglet twisted tape inserts,” Appl. Ther. Eng., vol. 30, no. 4, pp. 310–318, Mar. 2010. DOI: 10.1016/j.applthermaleng.2009.09.006.
- P. Pal and S. Saha, “Thermal and friction characteristics of laminar flow through square and rectangular ducts with transverse ribs and twisted tapes with and without oblique teeth,” J. Enhance. Heat Transfer, vol. 17, no. 1, pp. 1–21, Jan. 2010. DOI: 10.1016/j.expthermflusci.2009.09.003.
- J. Han, J. Park and C. Lei, “Heat transfer enhancement in channels with turbulence promoters,” J. Eng. Gas Turbines Power, vol. 107, no. 3, pp. 628–635, Jul. 1985. DOI: 10.1115/1.3239782.
- S. Fann, W. Yang and N. Zhang, “Local heat transfer in a rotating serpentine passage with rib-roughened surfaces,” Int. J. Heat Mass Transf., vol. 37, no. 2, pp. 217–218, Jan. 1994. DOI: 10.1016/0017-9310(94)90094-9.
- J. Abraham and E. Sparrow, “Fluid flow and heat transfer in multiply-folded, continuous flow passages including conjugate thermal interaction between the fluid and bounding walls,” Numer. Heat Transf. A, vol. 42, no. 4, pp. 327–344, Sep. 2002. DOI: 10.1080/10407780290059585.
- J. P. Abraham, E. M. Sparrow, J. M. Gorman, Y. Zhao and W. J. Minkowycz, “Application of an intermittency model for laminar, transitional, and turbulent internal flows,” J. Fluids Eng., vol. 141, no. 7, pp. 9, Jul. 2019. DOI: 10.1115/1.4042664.
- V. Ozceyhan, S. Gunes, R. Buyukalaca and N. Altuntop, “Heat transfer enhancement in a tube using circular cross sectional rings separated from wall,” Appl. Energy, vol. 85, no. 10, pp. 988–1001, Oct. 2008. DOI: 10.1016/j.apenergy.2008.02.007.
- C. Leung, T. Wong and S. Probert, “Enhanced forced-convection from ribbed or machine-roughened inner surfaces within triangular ducts,” Appl. Energy, vol. 69, no. 2, pp. 87–99, Jun. 2001. DOI: 10.1016/S0306-2619(01)00002-2.
- S. Chang, “Forced heat convection in a reciprocating duct fitted with 45 degree crossed ribs,” Int. J. Therm. Sci., vol. 41, no. 3, pp. 229–240, Nov. 2002. DOI: 10.1016/S1290-0729(01)01311-4.
- L. Wang and B. Sunden, “Experimental investigation of local heat transfer in a square duct with continuous and truncated ribs,” Exp. Heat Transf., vol. 18, no. 3, pp. 179–197, Mar. 2005. DOI: 10.1080/08916150590953397.
- S. Saha, “Thermal and friction characteristics of laminar flow through rectangular and square ducts with transverse ribs and wire coil inserts,” Exp. Therm. Fluid Sci., vol. 34, no. 1, pp. 63–72, Jan. 2010. DOI: 10.1016/j.expthermflusci.2009.09.003.
- M. Sukesan and A. Dhiman, “Laminar mixed convection in a channel with a built-in semi-circular cylinder under the effect of cross-buoyancy,” Int. Comm. Heat Mass Transf., vol. 58, pp. 25–32, Nov. 2014. DOI: 10.1016/j.icheatmasstransfer.2014.08.025.
- E. M. Sparrow and J. P. Abraham, “A new buoyancy model replacing the standard pseudo-density difference for internal natural convection in gases,” Int. J. Heat Mass Transf., vol. 46, no. 19, pp. 3583–3591, Sep. 2003. DOI: 10.1016/S0017-9310(03)00152-2.
- F. Menter, P. Smirnov, T. Liu, and R. Avancha, and R. “A one-equation local correlation-based transition model,” Flow Turbul. Combust, vol. 95, no. 4, pp. 583–619, Jul. 2015. DOI: 10.1007/s10494-015-9622-4.
- J. Abraham, E. Sparrow and W. Minkowycz, “Internal-flow Nusselt numbers for the low-Reynolds-number end of the laminar-to-turbulent transition regime,” Int. J. Heat Mass Transf., vol. 54, no. 1–3, pp. 584–588, Jan. 2011. DOI: 10.1016/j.ijheatmasstransfer.2010.09.012.
- A. Salama, M. F. El-Amin and S. Sun, “Three-dimensional, numerical investigation of both flow and heat transfer in rectangular channels subject to partial blockage,” Heat Transf. Eng., vol. 36, no. 2, pp. 152–165, Aug. 2015. DOI: 10.1080/01457632.2014.909191.
- A. Kumar and A. Dhiman, “Laminar flow and heat transfer phenomena across a confined semicircular bluff body at low Reynolds numbers,” Heat Transf. Eng., vol. 36, no. 18, pp. 1540–1551, Mar. 2015. DOI: 10.1080/01457632.2015.1025000.
- W. Qiuwang, L. Mei and Z. Min, “Effect of blocked core-tube diameter on heat transser performance of internally longitudinal finned tubes,” Heat Transf. Eng., vol. 29, no. 1, pp. 107–115, Jul. 2008. DOI: 10.1080/09647040701677672.
- D. Chatterjee and B. Mondal, “Mixed convection heat transfer from an equilateral triangular cylinder in cross flow at low Reynolds numbers,” Heat Transf. Eng., vol. 36, no. 1, pp. 123–133, Mar. 2015. DOI: 10.1080/01457632.2014.906800.
- J. P. Coutier and R. Greif, “An investigation of laminar mixed convection inside a horizontal tube with isothermal wall conditions,” Int. J. Heat Mass Transf., vol. 28, no. 7, pp. 1293–1305, Jul. 1985. DOI: 10.1016/0017-9310(85)90160-7.
- H. Mohammed and Y. Salman, “Experimental investigation of mixed convection heat transfer for thermally developing flow in a horizontal circular cylinder,” Appl. Therm. Eng., vol. 27, no. 8–9, pp. 1522–1533, Jun. 2007. DOI: 10.1016/j.applthermaleng.2006.09.023.
- T. Boufendi and M. Afrid, “Three-dimensional conjugate conduction-mixed convection with variable fluid properties in a heated horizontal pipe,” Rev. Energy. Ren., vol. 8, pp. 1–18, Jan. 2005.
- J. Meyer and M. Everts, “Single-phase mixed convection of developing and fully developed flow in a smooth horizontal circular tube in the laminar and transitional flow regimes,” Int. J. Heat Mass Trans., vol. 117, pp. 1251–1273, Feb. 2018. DOI: 10.1016/j.ijheatmasstransfer.2017.10.070.