Chevron Angle Effect on Plate and Shell Heat Exchangers Measured with Particle Tracking Velocimetry

References

• T. M. Abou Elmaaty, A. E. Kabeelb and M. Mahgoubc, “Corrugated plate heat exchanger review,” Renew. Sust. Energ. Rev., vol. 70, pp. 852–860, Apr. 2017. DOI: 10.1016/j.rser.2016.11.266.
   Web of Science ®Google Scholar
• J. J. Klemes, O. Arsenyeva, P. Kapustenko and L. Tovazhnyanskyy, Compact Heat Exchangers for Energy Transfer Intensification: Low Grade Heat and Fouling Mitigation, 1st ed. Boca Raton, FL, USA: CRC Press, 2015. DOI: 10.1201/b18862.
   Google Scholar
• J. Lim, K. S. Song, D. Kim, D. Lee and Y. Kim, “Condensation heat transfer characteristics of R245fa in a shell and plate heat exchanger for high-temperature heat pumps,” Int. J. Heat Mass Transf., vol. 127, pp. 730–739, Dec. 2018. DOI: 10.1016/j.ijheatmasstransfer.2018.06.143.
   Web of Science ®Google Scholar
• O. P. Arsenyeva, et al., “Two types of welded plate heat exchangers for efficient heat recovery in industry,” Appl. Therm. Eng., vol. 105, pp. 763–773, Jul. 2016. DOI: 10.1016/j.applthermaleng.2016.03.064.
   Web of Science ®Google Scholar
• A. Abbas, H. Lee, A. Sengupta and C.-C. Wang, “Numerical investigation of thermal and hydraulic performance of shell and plate heat exchanger,” Appl. Therm. Eng., vol. 167, pp. 114705, Feb. 2020. DOI: 10.1016/j.applthermaleng.2019.114705.
   Web of Science ®Google Scholar
• H. Lee, A. Sadeghianjahromi, P.-L. Kuo and C.-C. Wang, “Experimental investigation of the thermofluid characteristics of shell-and-plate heat exchangers,” Energies, vol. 13, no. 20, pp. 5304, Oct. 2020. DOI: 10.3390/en13205304.
   Web of Science ®Google Scholar
• C. Jo, D. Lee, H. J. Chung, Y. Kang and Y. Kim, “Comparative evaluation of the evaporation heat transfer characteristics of a low-GWP refrigerant R-1234ze(E) between shell-and-plate and plate heat exchangers,” Int. J. Heat Mass Transf., vol. 153, pp. 119598, Jun. 2020. DOI: 10.1016/j.ijheatmasstransfer.2020.119598.
   Web of Science ®Google Scholar
• O. J. Kwon, J. H. Jung and Y. T. Kang, “Development of experimental Nusselt number and friction factor correlations for condensation of R-1233zd(E) in plate heat exchangers,” Int. J. Heat Mass Transf., vol. 158, pp. 120008, Sep. 2020. DOI: 10.1016/j.ijheatmasstransfer.2020.120008.
   Web of Science ®Google Scholar
• K. S. Song, S. Yun, D. Lee, K. Kim and Y. Kim, “Evaporation heat transfer characteristics of R-245fa in a shell and plate heat exchanger for very-high-temperature heat pumps,” Int. J. Heat Mass Transf., vol. 151, pp. 119408, Apr. 2020. DOI: 10.1016/j.ijheatmasstransfer.2020.119408.
   Web of Science ®Google Scholar
• K. Wang, et al., “Flow patterns and pressure drop in the shell-and-plate heat exchangers,” Int. J. Multiphase Flow, vol. 129, pp. 103323, Aug. 2020. DOI: 10.1016/j.ijmultiphaseflow.2020.103323.
   Web of Science ®Google Scholar
• J. Zhang, X. Zhu, M. E. Mondejar and F. Haglind, “A review of heat transfer enhancement techniques in plate heat exchangers,” Renew. Sust. Energ. Rev., vol. 101, pp. 305–328, Mar. 2019. DOI: 10.1016/j.rser.2018.11.017.
   Web of Science ®Google Scholar
• J. Yang, A. Jacobi and W. Liu, “Heat transfer correlations for single-phase flow in plate heat exchangers based on experimental data,” Appl. Therm. Eng., vol. 113, pp. 1547–1557, Feb. 2017. DOI: 10.1016/j.applthermaleng.2016.10.147.
   Web of Science ®Google Scholar
• T. S. Khan, M. S. Khan and Z. H. Ayub, “Single-phase flow pressure drop analysis in a plate heat exchanger,” Heat Transf. Eng., vol. 38, no. 2, pp. 256–264, Jan. 2017. DOI: 10.1080/01457632.2016.1177430.
   Web of Science ®Google Scholar
• T. S. Khan, M. S. Khan, M.-C. Chyu and Z. H. Ayub, “Experimental investigation of single-phase convective heat transfer coefficient in a corrugated plate heat exchanger for multiple plate configurations,” Appl. Therm. Eng., vol. 30, no. 8–9, pp. 1058–1065, Jun. 2010. DOI: 10.1016/j.applthermaleng.2010.01.021.
   Web of Science ®Google Scholar
• W. W. Focke, J. Zachariades and I. Olivier, “The effect of the corrugation inclination angle on the thermohydraulic performance of plate heat exchangers,” Int. J. Heat Mass Transf., vol. 28, no. 8, pp. 1469–1479, Aug. 1985. DOI: 10.1016/0017-9310(85)90249-2.
   Web of Science ®Google Scholar
• D. Dović and S. Svaic, “Influence of chevron plates geometry on performances of plate heat exchangers,” Tehnički Vjesn, vol. 14, no. 1–2, pp. 37–45, Jan. 2007.
   Google Scholar
• V. Grabenstein, A.-E. Polzin and S. Kabelac, “Experimental investigation of the flow pattern, pressure drop and void fraction of two-phase flow in the corrugated gap of a plate heat exchanger,” Int. J. Multiphase Flow, vol. 91, pp. 155–169, May 2017. DOI: 10.1016/j.ijmultiphaseflow.2017.01.012.
   Web of Science ®Google Scholar
• G.-M. Zhang, M.-C. Tian and S.-J. Zhou, “Simulation and analysis of flow pattern in cross corrugated plate heat exchangers,” J. Hydrodyn., vol. 18, no. 5, pp. 547–551, Oct. 2006. DOI: 10.1016/S1001-6058(06)60133-9.
   Web of Science ®Google Scholar
• M. Raffel, et al., Particle Image Velocimetry: A Practical Guide. Berlin, Germany: Springer, 2018. DOI: 10.1007/978-3-319-68852-7.
   Google Scholar
• J. L. G. Oliveira, C. W. M. van der Geld and J. G. M. Kuerten, “Concentration and velocity statistics of inertial particles in upward and downward pipe flow,” J. Fluid Mech., vol. 822, pp. 640–663, Jul. 2017. DOI: 10.1017/jfm.2017.289.
   Web of Science ®Google Scholar
• J. L. G. Oliveira, C. W. M. van der Geld and J. G. M. Kuerten, “Lagrangian and Eulerian statistics of pipe flows measured with 3D-PTV at moderate and high Reynolds numbers,” Flow Turbulence Combust., vol. 91, no. 1, pp. 105–137, Jul. 2013. DOI: 10.1007/s10494-013-9457-9.
   Web of Science ®Google Scholar
• J. L. G. Oliveira, C. W. M. van der Geld and J. G. M. Kuerten, “Lagrangian velocity and acceleration statistics of fluid and inertial particles measured in pipe flow with 3D particle tracking velocimetry,” Int. J. Multiphase Flow, vol. 73, pp. 97–107, Jul. 2015. DOI: 10.1016/j.ijmultiphaseflow.2015.03.017.
   Web of Science ®Google Scholar
• G. S. M. Martins, et al., “Fatigue performance evaluation of plate and shell heat exchangers,” Int. J. Pressure Vessels Pip., vol. 188, pp. 104237, Dec. 2020. DOI: 10.1016/j.ijpvp.2020.104237.
   Web of Science ®Google Scholar
• L. Beckedorff, et al., “Flow statistics in Plate and Shell Heat Exchangers measured with PTV,” Int. J. Heat Fluid Flow, vol. 79, pp. 108461, Oct. 2019. DOI: 10.1016/j.ijheatfluidflow.2019.108461.
   Web of Science ®Google Scholar
• S. B. Genić, B. M. Jaćimović, D. Mandić and D. Petrović, “Experimental determination of fouling factor on plate heat exchangers in district heating system,” Energy Build., vol. 50, pp. 204–211, Jul. 2012. DOI: 10.1016/j.enbuild.2012.03.039.
   Web of Science ®Google Scholar
• E. Nørgaard, T. A. Sørensen, T. M. Hansen and M. Kauffeld, “Performance of components of ice slurry systems: Pumps, plate heat exchangers, and fittings,” Int. J. Refrig., vol. 28, no. 1, pp. 83–91, Jan. 2005. DOI: 10.1016/j.ijrefrig.2004.07.018.
   Web of Science ®Google Scholar
• H. M. Müller-Steinhagen and J. Middis, “Particulate fouling in plate heat exchangers,” Heat Transf. Eng., vol. 10, no. 4, pp. 30–36, Jan. 1989. DOI: 10.1080/01457638908939714.
   Google Scholar
• C. A. Bennett and R. P. Hohmann, “Methods for calculating shear stress at the wall for single-phase flow in tubular, annular, plate, and shell-side heat exchanger geometries,” Heat Transf. Eng., vol. 38, no. 9, pp. 829–840, Jun. 2017. DOI: 10.1080/01457632.2016.1211913.
   Web of Science ®Google Scholar
• E. M. Laws, E.-H. Lim and J. L. Livesey, “Momentum balance in highly distorted turbulent pipe flows,” Exp. Fluids, vol. 5, no. 1, pp. 36–42, Jan. 1986. DOI: 10.1007/BF00272423.
   Google Scholar
• H. Martin, “A theoretical approach to predict the performance of chevron-type plate heat exchangers,” Chem. Eng. Process, vol. 35, no. 4, pp. 301–310, Jan. 1996. DOI: 10.1016/0255-2701(95)04129-X.
   Web of Science ®Google Scholar
• H.-E. Albrecht, M. Borys, N. Damaschke and C. Tropea, Laser Doppler and Phase Doppler Measurement Techniques. Berlin, Germany: Springer, 2003. DOI: 10.1007/978-3-662-05165-8.
   Google Scholar
• R. Clift, K. J. R. Grace and M. E. Weber, Bubbles, Drops and Particles. New York, NY, USA: Academic Press, 1978.
   Google Scholar
• H.-G. Maas, “Contributions of digital photogrammetry to 3D-PTV,” in Three-Dimensional Velocity and Vorticity Measuring and Image Analysis Techniques, vol. 4, T. Dracos, Eds. Dordrecht, the Netherlands: Springer, 1996, pp. 191–207. DOI: 10.1007/978-94-015-8727-3_9.
   Google Scholar
• T. Dracos, “Particle tracking in three-dimensional space,” in Three-Dimensional Velocity and Vorticity Measuring and Image Analysis Techniques, vol. 4, T. Dracos, Eds. Dordrecht, the Netherlands: Springer, 1996, pp. 209–227. DOI: 10.1007/978-94-015-8727-3_10.
   Google Scholar
• R. J. E. Walpot, J. G. M. Kuerten and C. W. M. van der Geld, “Experimental determination of Lagrangian velocity statistics in turbulent pipe flow,” Flow Turbulence Combust., vol. 76, no. 2, pp. 163–175, Mar. 2006. DOI: 10.1007/s10494-006-9010-1.
   Web of Science ®Google Scholar
• J. L. G. Oliveira, C. W. M. van der Geld and J. G. M. Kuerten, “Turbulent stresses and particle break-up criteria in particle-laden pipe flows,” Int. J. Heat Fluid Flow, vol. 53, pp. 44–55, Jun. 2015. DOI: 10.1016/j.ijheatfluidflow.2015.02.001.
   Web of Science ®Google Scholar
• S. Etemad and B. Sundén, “Hydraulic and thermal simulations of a cross-corrugated plate heat exchanger unitary cell,” Heat Transf. Eng., vol. 37, no. 5, pp. 475–486, Mar. 2016. DOI: 10.1080/01457632.2015.1057458.
   Web of Science ®Google Scholar
• R. K. Shah and M. S. Bhatti, “Assessment of correlations for single-phase heat exchangers,” in Two-Phase Flow Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, vol. 143, S. Kakaç, A. E. Bergles, and E. O. Fernandes, Eds. Dordrecht, The Netherlands: Springer, 1988, pp. 81–122.
   Google Scholar
• H. Coleman and W. Steele, Experimentation, Validation, and Uncertainty Analysis for Engineers. Hoboken, NY: John Wiley & Sons, 2009.
   Google Scholar
• W. W. Focke and P. G. Knibbe, “Flow visualization in parallel-plate ducts with corrugated walls,” J. Fluid Mech., vol. 165, no. 1, pp. 73–77, Apr. 1986. DOI: 10.1017/S0022112086003002.
   Web of Science ®Google Scholar
• R. W. Fox, A. T. McDonald and P. J. Pritchard, Introduction to Fluid Mechanics, 6th ed. Hoboken, NY, USA: John Wiley & Sons, 2004.
   Google Scholar
• A. Bejan, Convection Heat Transfer, 4th ed. New York, NY, USA: John Wiley & Sons, 2013. DOI: 10.1002/9781118671627.
   Google Scholar
• A. P. Colburn, “A method of correlating forced convection heat transfer data and a comparison with fluid friction,” Int. J. Heat Mass Transf., vol. 7, no. 12, pp. 1359–1384, Dec. 1964. DOI: 10.1016/0017-9310(64)90125-5.
   Google Scholar
• R. L. Heavner, H. Kumar and A. S. Wanniarachchi, “Performance of an industrial plate heat exchanger: Effect of chevron angle,” AIChE Symp. Series, vol. 89, no. 295, pp. 262–267, Dec. 1993.
   Google Scholar
• H. Kumar, “The plate heat exchanger: Construction and design,” in Institute of Chemical Engineering Symposium Series, vol. 2. Leeds, UK: Pergamon, 1984, pp. 1275–1288. DOI: 10.1016/B978-0-85295-175-0.50054-0.
   Google Scholar
• A. C. Talik, L. S. Fletcher, N. K. Anand and L. W. Swanson, “Heat transfer and pressure drop characteristics of a plate heat exchanger using a propylene-glycol/water mixture as the working fluid,” presented at the 30th National Heat Transfer Conference, New York, NY, USA, Dec. 31, 1995.
   Google Scholar