A Comprehensive Compendium on Passive Augmentation Techniques for Enhancement of Single-Phase Heat Transfer Coefficients in Heat Exchanger Tubes under Laminar and Turbulent Flow Conditions

References

• P. M. Ligrani, M. M. Oliveira, and T. Blaskovich, “Comparison of heat transfer augmentation techniques,” AIAA J., vol. 41, no. 3, pp. 337–362, Mar. 2003. DOI: 10.2514/2.1964.
   Google Scholar
• A. Dewan, P. Mahanta, K. S. Raju, and P. Suresh Kumar, “Review of passive heat transfer augmentation techniques, Proceedings of the Institution of Mechanical Engineers,” Part A: J. Power Energy, vol. 218, no. 7, pp. 509–527, 2004. DOI: 10.1243/0957650042456953.
   Web of Science ®Google Scholar
• S. Liu and M. Sakr, “A comprehensive review on passive heat transfer enhancements in pipe exchangers,” Renew. Sustain. Energy Rev., vol. 19, pp. 64–81, Mar. 2013. DOI: 10.1016/j.rser.2012.11.021.
   Web of Science ®Google Scholar
• W. T. Ji, A. M. Jacobi, Y. L. He, and W. Q. Tao, “Summary and evaluation on the heat transfer enhancement techniques of gas laminar and turbulent pipe flow,” Int. J. Heat Mass Transfer, vol. 111, pp. 467–483, Aug. 2017. DOI: 10.1016/j.ijheatmasstransfer.2017.03.080.
   Web of Science ®Google Scholar
• C. Maradiya, J. Vadher, and R. Agarwal, “The heat transfer enhancement techniques and their Thermal Performance Factor,” Beni-Suef Univ. J. Basic Appl. Sci., vol. 7, no. 1, pp. 1–21, Mar. 2018. DOI: 10.1016/j.bjbas.2017.10.001.
   Google Scholar
• R. M. Manglik and A. E. Bergles, “Swirl flow heat transfer and pressure drop with twisted-tape inserts,” in Advances in Heat Transfer, vol. 36, J. P. Hartnett, T. F. Irvine Jr, Y. I. Cho, G. A. Greene, Academic Press, USA, 2002, pp. 250–251.
   Google Scholar
• N. Zheng, F. Yan, K. Zhang, T. Zhou, and Z. Sun, “A review on single-phase convective heat transfer enhancement based on multi-longitudinal vortices in heat exchanger tubes,” Appl. Therm. Eng., vol. 164, no. 114475, pp. 114475, Jan. 2020. DOI: 10.1016/j.applthermaleng.2019.114475.
   Web of Science ®Google Scholar
• F. W. Dittus and L. M. K. Boelter, “Heat transfer in automobile radiator of the tubular type,” Int. Commun. Heat Mass Transfer, vol. 12, no. 1, pp. 3–32, 1985. DOI: 10.1016/0735-1933(85)90003-X.
   Web of Science ®Google Scholar
• E. N. Sieder and G. E. Tate, “Heat transfer and pressure drop of liquids in tubes,” Ind. Eng. Chem., vol. 28, no. 12, pp. 1429–1435, Dec. 1936. DOI: 10.1021/ie50324a027.
   Google Scholar
• R. M. Manglik and A. E. Bergles, “Heat Transfer enhancement and pressure drop in viscous liquid flows in isothermal tubes,” Warme-Und Stoffubertragung., vol. 27, no. 4, pp. 249–257, Apr. 1992. DOI: 10.1007/BF01589923.
   Web of Science ®Google Scholar
• S. Eiamsa-Ard and P. Promvonge, “Enhancement of heat transfer in a tube with regularly spaced helical tape swirl generators,” Solar Energy, vol. 78, no. 4, pp. 483–494, Apr. 2005. DOI: 10.1016/j.solener.2004.09.021.
   Web of Science ®Google Scholar
• A. T. Wijayanta, M. Mirmanto, and M. Aziz, “Heat transfer augmentation of internal flow using twisted tape insert in turbulent flow,” Heat Transfer Eng., vol. 41, no. 14, pp. 1288–1300, Aug. 2020. DOI: 10.1080/01457632.2019.1637149.
   Web of Science ®Google Scholar
• P. Sivashanmugam and S. Suresh, “Experimental studies on heat transfer and friction factor characteristics of laminar flow through a circular tube fitted with helical screw-tape inserts,” Appl. Therm. Eng., vol. 26, no. 16, pp. 1990–1997, Nov. 2006. DOI: 10.1016/j.applthermaleng.2006.01.008.
   Web of Science ®Google Scholar
• P. Sivashanmugam and S. Suresh, “Experimental studies on heat transfer and friction factor characteristics of turbulent flow through a circular tube fitted with helical screw-tape inserts,” Chem. Eng. Process., vol. 46, no. 12, pp. 1292–1298, Dec. 2007. DOI: 10.1016/j.cep.2006.10.009.
   Web of Science ®Google Scholar
• P. Sivashanmugam and P. K. Nagarajan, “Studies on heat transfer and friction factor characteristics of laminar flow through a circular tube fitted with right and left helical screw-tape inserts,” Exp. Therm. Fluid Sci., vol. 32, no. 1, pp. 192–197, Dec. 2007. DOI: 10.1016/j.expthermflusci.2007.03.005.
   Web of Science ®Google Scholar
• S. W. Chang, Y. J. Jan, and J. S. Liou, “Turbulent heat transfer and pressure drop in tube fitted with serrated twisted tape,” Int. J. Therm. Sci., vol. 46, no. 5, pp. 506–518, May 2007. DOI: 10.1016/j.ijthermalsci.2006.07.009.
   Web of Science ®Google Scholar
• S. W. Chang, T. L. Yang, and J. S. Liou, “Heat transfer and pressure drop in tube with broken twisted tape insert,” Exp. Therm. Fluid Sci., vol. 32, no. 2, pp. 489–501, Nov. 2007. DOI: 10.1016/j.expthermflusci.2007.06.002.
   Web of Science ®Google Scholar
• S. Jaisankar, T. K. Radhakrishnan, and K. N. Sheeba, “Experimental studies on heat transfer and friction factor characteristics of thermosyphon solar water heater system fitted with spacer at the trailing edge of twisted tapes,” Appl. Therm. Eng., vol. 29, no. 5–6, pp. 1224–1231, Apr. 2009. DOI: 10.1016/j.applthermaleng.2008.06.009.
   Web of Science ®Google Scholar
• S. Eiamsa-ard, C. Thianpong, and P. Eiamsa-ard, “Turbulent heat transfer enhancement by counter/co-swirling flow in a tube fitted with twin twisted tapes,” Exp. Therm. Fluid Sci., vol. 34, no. 1, pp. 53–62, Jan. 2010. DOI: 10.1016/j.expthermflusci.2009.09.002.
   Web of Science ®Google Scholar
• S. Eiamsa-Ard and P. Promvonge, “Performance assessment in a heat exchanger tube with alternate clockwise and counter-clockwise twisted-tape inserts,” Int. J. Heat Mass Transfer, vol. 53, no. 7–8, pp. 1364–1372, Mar. 2010. DOI: 10.1016/j.ijheatmasstransfer.2009.12.023.
   Web of Science ®Google Scholar
• K. Wongcharee and S. Eiamsa-ard, “Friction and heat transfer characteristics of laminar swirl flow through the round tubes inserted with alternate clockwise and counter-clockwise twisted-tapes,” Int. Commun. Heat Mass Transfer, vol. 38, no. 3, pp. 348–352, Mar. 2011. DOI: 10.1016/j.icheatmasstransfer.2010.12.007.
   Web of Science ®Google Scholar
• S. Eiamsa-ard, P. Seemawute, and K. Wongcharee, “Influences of peripherally-cut twisted tape insert on heat transfer and thermal performance characteristics in laminar and turbulent tube flows,” Exp. Therm. Fluid Sci., vol. 34, no. 6, pp. 711–719, Sept. 2010. DOI: 10.1016/j.expthermflusci.2009.12.013.
   Web of Science ®Google Scholar
• S. Eiamsa-ard, K. Wongcharee, P. Eiamsa-Ard, and C. Thianpong, “Heat transfer enhancement in a tube using delta-winglet twisted tape inserts,” Appl. Therm. Eng.,” vol. 30, no. 4, pp. 310–318, Mar. 2010. DOI: 10.1016/j.applthermaleng.2009.09.006.
   Web of Science ®Google Scholar
• S. Eiamsa-ard, “Study on thermal and fluid flow characteristics in turbulent channel flows with multiple twisted tape vortex generators,” Int. Commun. Heat Mass Transfer, vol. 37, no. 6, pp. 644–651, Jul. 2010. DOI: 10.1016/j.icheatmasstransfer.2010.02.004.
   Web of Science ®Google Scholar
• K. Wongcharee and S. Eiamsa-ard, “Heat transfer enhancement by twisted tapes with alternate-axes and triangular, rectangular, and trapezoidal wings,” Chem. Eng. Process., vol. 50, no. 2, pp. 211–219, Feb. 2011. DOI: 10.1016/j.cep.2010.11.012.
   Web of Science ®Google Scholar
• S. Yang, L. Zhang, and H. Xu, “Experimental study on convective heat transfer and flow resistance characteristics of water flow in twisted elliptical tubes,” Appl. Therm. Eng., vol. 31, no. 14–15, pp. 2981–2991, Oct. 2011. DOI: 10.1016/j.applthermaleng.2011.05.030.
   Web of Science ®Google Scholar
• S. W. Chang and M. H. Guo, “Thermal performances of enhanced smooth and spiky twisted tapes for laminar and turbulent tubular flows,” Int. J. Heat Mass Transfer, vol. 55, no. 25–26, pp. 7651–7667, Dec. 2012. DOI: 10.1016/j.ijheatmasstransfer.2012.07.077.
   Web of Science ®Google Scholar
• X. Zhang, Z. Liu, and W. Liu, “Numerical studies on heat transfer and flow characteristics for laminar flow in a tube with multiple regularly spaced twisted tapes,” Int. J. Therm. Sci., vol. 58, pp. 157–167, Aug. 2012. DOI: 10.1016/j.ijthermalsci.2012.02.025.
   Web of Science ®Google Scholar
• H. Bas and V. Ozceyhan, “Heat transfer enhancement in a tube with twisted tape inserts placed separately from the tube wall,” Exp. Therm. Fluid Sci., vol. 41, pp. 51–58, Sept. 2012. DOI: 10.1016/j.expthermflusci.2012.03.008.
   Web of Science ®Google Scholar
• S. Eiamsa-ard, K. Yongsirib, K. Nanan, and C. Thianpong, “Heat transfer augmentation by helically twisted tapes as swirl and turbulence promoters,” Chem. Eng. Process., vol. 60, pp. 42–48, Oct. 2012. DOI: 10.1016/j.cep.2012.06.001.
   Web of Science ®Google Scholar
• C. Thianpong, K. Yongsiri, K. Nanan, and S. Eiamsa-ard, “Thermal performance evaluation of heat exchangers fitted with twisted-ring turbulators,” Int. Commun. Heat Mass Transfer, vol. 39, no. 6, pp. 861–868, Jul. 2012. DOI: 10.1016/j.icheatmasstransfer.2012.04.004.
   Web of Science ®Google Scholar
• S. Eiamsa-ard, P. Somkleang, C. Nuntadusit, and C. Thianpong, “Heat transfer enhancement in tube by inserting uniform/non-uniform twisted-tapes with alternate axes: Effect of rotated-axis length,” Appl. Therm. Eng., vol. 54, no. 1, pp. 289–309, May 2013. DOI: 10.1016/j.applthermaleng.2013.01.041.
   Web of Science ®Google Scholar
• J. Ananth and S. Jaisankar, “Investigation on heat transfer and friction factor characteristics of thermosiphon solar water heating system with left-right twist regularly spaced with rod and spacer,” Energy, vol. 65, pp. 357–363, Feb. 2014. DOI: 10.1016/j.energy.2013.12.001.
   Web of Science ®Google Scholar
• S. Pal and S. K. Saha, “Laminar flow and heat transfer through a circular tube having integral transverse corrugations and fitted with center-cleared twisted-tape,” Exp. Therm. Fluid Sci., vol. 57, pp. 388–395, Sept. 2014. DOI: 10.1016/j.expthermflusci.2014.06.008.
   Web of Science ®Google Scholar
• M. Tusar, A. Noman, M. Islam, P. Yarlagadda, and B. Salam, “CFD study of heat transfer enhancement and fluid flow characteristics of turbulent flow through tube with twisted tape inserts,” Energy Proc., vol. 160, pp. 715–722, Feb. 2019. DOI: 10.1016/j.egypro.2019.02.188.
   Google Scholar
• K. Ruengpayungsak, M. Kumar, V. Chuwattanakul, and S. Eiamsa-ard, “Experimental study of the effects of inclusion of rectangular‑cut twisted tapes on heat transfer and pressure drop in a round tube,” Arab. J. Sci. Eng., vol. 44, no. 12, pp. 10303–10312, Jul. 2019. DOI: 10.1007/s13369-019-04047-7.
   Web of Science ®Google Scholar
• T. Dagdevir and V. Ozceyhan, “An experimental study on heat transfer enhancement and flow characteristics of a tube with plain, perforated and dimpled twisted tape inserts,” Int. J. Therm. Sci., vol. 159, no. 10654, pp. 106564, Jan. 2021. DOI: 10.1016/j.ijthermalsci.2020.106564.
   Web of Science ®Google Scholar
• A. Garcia, P. G. Vicente, and A. Viedma, “Experimental study of heat transfer enhancement with wire coil inserts in laminar-transition-turbulent regimes at different Prandtl numbers,” Int. J. Heat Mass Transfer, vol. 48, no. 21–22, pp. 4640–4651, Oct. 2005. DOI: 10.1016/j.ijheatmasstransfer.2005.04.024.
   Web of Science ®Google Scholar
• S. Bhattacharyya, H. Raghavendran, and A. R. Paul, “The effect of circular hole spring tape on the turbulent heat transfer and entropy analysis in a heat exchanger tube: An experimental study,” Exp. Heat Transfer, vol. 34, no. 6, pp. 493–512, Jul. 2021. DOI: 10.1080/08916152.2020.1787560.
   Web of Science ®Google Scholar
• P. Promvonge, “Thermal enhancement in a round tube with snail entry and coiled-wire inserts,” Int. Commun. Heat Mass Transfer, vol. 35, no. 5, pp. 623–629, May 2008. DOI: 10.1016/j.icheatmasstransfer.2007.11.003.
   Web of Science ®Google Scholar
• P. Promvonge, “Thermal performance in circular tube fitted with coiled square wires,” Energy Convers. Manag., vol. 49, no. 5, pp. 980–987, May 2008. DOI: 10.1016/j.enconman.2007.10.005.
   Web of Science ®Google Scholar
• M. A. Akhavan-Behabadi, R. Kumar, M. R. Salimpour, and R. Azimi, “Pressure drop and heat transfer augmentation due to coiled wire inserts during laminar flow of oil inside a horizontal tube,” Int. J. Therm. Sci., vol. 49, no. 2, pp. 373–379, Feb. 2010. DOI: 10.1016/j.ijthermalsci.2009.06.004.
   Web of Science ®Google Scholar
• S. Gunes, V. Ozceyhan, and O. Buyukalaca, “Heat transfer enhancement in a tube with equilateral triangle cross sectioned coiled wire inserts,” Exp. Therm. Fluid Sci., vol. 34, no. 6, pp. 684–691, Sept. 2010. DOI: 10.1016/j.expthermflusci.2009.12.010.
   Web of Science ®Google Scholar
• K. Nanan, M. Pimsarnb, W. Jedsadaratanachai, and S. Eiamsa-ard, “Heat transfer augmentation through the use of wire-rod bundles under constant wall heat flux condition,” Int. Commun. Heat Mass Transfer, vol. 48, pp. 133–140, Nov. 2013. DOI: 10.1016/j.icheatmasstransfer.2013.08.021.
   Web of Science ®Google Scholar
• T. Chompookham, W. Chingtuaythong, and S. Chokphoemphun, “Influence of a novel serrated wire coil insert on thermal characteristics and air flow behavior in a tubular heat exchanger,” Int. J. Therm. Sci., vol. 171, no. 107184, pp. 15, Jul. 2021. DOI: 10.1016/j.ijthermalsci.2021.107184.
   Web of Science ®Google Scholar
• M. Fiebig, P. Kallweit, N. Mitra, and S. Tiggelbeck, “Heat Transfer enhancement and drag by longitudinal vortex generators in channel flow,” Exp. Therm. Fluid Sci., vol. 4, no. 1, pp. 103–114, Jan. 1991. DOI: 10.1016/0894-1777(91)90024-L.
   Web of Science ®Google Scholar
• T. M. Liou, C. C. Chen, and T. W. Tsai, “Heat transfer and fluid flow in a square duct with 12 different shaped vortex generators,” J. Heat Transfer, vol. 122, no. 2, pp. 327–335, May 2000. DOI: 10.1115/1.521487.
   Web of Science ®Google Scholar
• K. Yakut, B. Sahin, C. Celik, N. Alemdaroglu, and A. Kurnuc, “Effects of tapes with double-sided delta winglets on heat and vortex characteristics,” Appl. Energy, vol. 80, no. 1, pp. 77–95, Jan. 2005. DOI: 10.1016/j.apenergy.2004.03.003.
   Web of Science ®Google Scholar
• A. S. Betul and T. Bali, “An experimental study on heat transfer and pressure drop characteristics of decaying swirl flow through a circular pipe with a vortex generator,” Int. J. Therm. Fluid Sci., vol. 32, no. 1, pp. 158–165, Oct. 2007. DOI: 10.1016/j.expthermflusci.2007.03.002.
   Web of Science ®Google Scholar
• S. Eiamsa-ard, S. Rattanawong, and P. Promvonge, “Turbulent convection in round tube equipped with propeller type swirl generators,” Int. Commun. Heat Mass Transfer, vol. 36, no. 4, pp. 357–364, Apr. 2009. DOI: 10.1016/j.icheatmasstransfer.2009.01.007.
   Web of Science ®Google Scholar
• T. Chompookham, C. Thianpong, S. Kwankaomeng, and P. Promvonge, “Heat transfer augmentation in a wedge-ribbed channel using winglet vortex generators,” Int. Commun. Heat Mass Transfer, vol. 37, no. 2, pp. 163–169, Feb. 2010. DOI: 10.1016/j.icheatmasstransfer.2009.09.012.
   Web of Science ®Google Scholar
• N. Depaiwa, T. Chompookham, and P. Promvonge, “Thermal enhancement in a solar air heater channel using rectangular winglet vortex generators,” Proceedings of the International Conference on Energy and Sustainable Development: Issues and Strategies (ESD 2010), Chiang Mai, Thailand, IEEE, pp.1–7, Oct. 2010. DOI: 10.1109/ESD.2010.5598864.
   Google Scholar
• A. Fan, J. Deng, J. Guo, and W. Liu, “A numerical study on thermo-hydraulic characteristics of turbulent flow in a circular tube fitted with conical strip inserts,” Appl. Therm. Eng., vol. 31, no. 14–15, pp. 2819–2828, Oct. 2011. DOI: 10.1016/j.applthermaleng.2011.05.007.
   Web of Science ®Google Scholar
• Y. You, A. Fan, W. Liu, and S. Huang, “Thermo-hydraulic characteristics of laminar flow in an enhanced tube with conical strip inserts,” Int. J. Therm. Sci., vol. 61, pp. 28–37, 2012. DOI: 10.1016/j.ijthermalsci.2012.06.013.
   Web of Science ®Google Scholar
• S. Caliskan, “Experimental investigation of heat transfer in a channel with new winglet-type vortex generators,” Int. J. Heat Mass Transfer, vol. 78, pp. 604–614, Nov. 2014. DOI: 10.1016/j.ijheatmasstransfer.2014.07.043.
   Web of Science ®Google Scholar
• P. Promvonge, N. Koolnapadol, M. Pimsarn, and C. Thianpong, “Thermal performance enhancement in a heat exchanger tube fitted with inclined vortex rings,” Appl. Therm. Eng., vol. 62, no. 1, pp. 285–292, Jan. 2014. DOI: 10.1016/j.applthermaleng.2013.09.031.
   Web of Science ®Google Scholar
• P. W. Deshmukh and R. P. Vedula, “Heat transfer and friction factor characteristics of turbulent flow through a circular tube fitted with vortex generator inserts,” Int. J. Heat Mass Transfer, vol. 79, pp. 551–560, Dec. 2014. DOI: 10.1016/j.ijheatmasstransfer.2014.08.042.
   Web of Science ®Google Scholar
• P. W. Deshmukh, S. V. Prabhu, and R. P. Vedula, “Heat transfer enhancement for laminar flow in tubes using curved delta wing vortex generator inserts,” Appl. Therm. Eng., vol. 106, pp. 1415–1426, Aug. 2016. DOI: 10.1016/j.applthermaleng.2016.06.120.
   Web of Science ®Google Scholar
• M. Khoshvaght-Aliabadi, O. Sartipzadeh, and A. Alizadeh, “An experimental study on vortex-generator insert with different arrangements of delta-winglets,” Energy, vol. 82, no. C, pp. 629–639, 2015. DOI: 10.1016/j.energy.2015.01.072.
   Web of Science ®Google Scholar
• W. Jedsadaratanachai, N. Jayranaiwachira, and P. Promvonge, “3D numerical study on flow structure and heat transfer in a circular tube with V-baffles,” Chin. J. Chem. Eng., vol. 23, no. 2, pp. 342–349, Feb. 2015. DOI: 10.1016/j.cjche.2014.11.006.
   Web of Science ®Google Scholar
• A. Bekele, M. Mishra, and S. Dutta, “Effect of delta-shaped obstacles on the thermal performance of solar air heater,” Adv. Mech. Eng., vol. 2011, pp. 1–10, Aug. 2011. DOI: 10.1155/2011/103502.
   Web of Science ®Google Scholar
• N. Zheng et al., “Numerical studies on thermo-hydraulic characteristics of laminar flow in a heat exchanger tube fitted with vortex rods,” Int. J. Therm. Sci., vol. 100, pp. 448–456, Feb. 2016. DOI: 10.1016/j.ijthermalsci.2015.09.008.
   Web of Science ®Google Scholar
• P. Liu, N. Zheng, F. Shan, Z. Liu, and W. Liu, “An experimental and numerical study on the laminar heat transfer and flow characteristics of a circular tube fitted with multiple conical strips inserts,” Int. J. Heat Mass Transfer, vol. 117, pp. 691–709, Feb. 2018. DOI: 10.1016/j.ijheatmasstransfer.2017.10.035.
   Web of Science ®Google Scholar
• P. Promvonge and S. Skullong, “Augmented heat transfer in tubular heat exchanger fitted with V-baffled tapes,” Int. J. Therm. Sci., vol. 155, no. 106429, pp. 106429, Sept. 2020. DOI: 10.1016/j.ijthermalsci.2020.106429.
   Web of Science ®Google Scholar
• K. Zhang, Z. Sun, N. Zheng, and Q. Chen, “Effects of the configuration of winglet vortex generators on turbulent heat transfer enhancement in circular tubes,” Int. J. Heat Mass Transfer, vol. 157, no. 119928, pp. 119928, Aug. 2020. DOI: 10.1016/j.ijheatmasstransfer.2020.119928.
   Web of Science ®Google Scholar
• S. Pourhedayat, S. M. Pesteei, H. E. Ghalinghie, M. Hashemian, and M. A. Ashraf, “Thermal-exergetic behavior of triangular vortex generators through the cylindrical tubes,” Int. J. Heat Mass Transfer, vol. 151, no. 119406, pp. 119406, Apr. 2020. DOI: 10.1016/j.ijheatmasstransfer.2020.119406.
   Web of Science ®Google Scholar
• J. S. Park, J. C. Han, Y. Huang, S. Ou, and R. J. Boyle, “Heat transfer performance comparisons of five different rectangular channels with parallel angled ribs,” Int. J. Heat Mass Transfer, vol. 35, no. 11, pp. 2891–2903, Nov. 1992. DOI: 10.1016/0017-9310(92)90309-G.
   Web of Science ®Google Scholar
• M. E. Taslim, T. Li, and D. M. Karcher, “Experimental heat transfer and friction in channels roughened with angled, V-shaped and discrete ribs on two opposite walls,” Trans. ASME J. Turbomach., vol. 4, pp. 1–11, Jun. 1994. DOI: 10.1115/94-GT-163.
   Google Scholar
• J. A. Meng, X. G. Liang, and Z. X. Li, “Field synergy optimization and enhanced heat transfer by multi-longitudinal vortexes flow in tube,” Int. J. Heat Mass Transfer, vol. 48, no. 16, pp. 3331–3337, Jul. 2005. DOI: 10.1016/j.ijheatmasstransfer.2005.02.035.
   Web of Science ®Google Scholar
• P. Naphon, M. Nuchjapo, and J. Kurujareon, “Tube side heat transfer coefficient and friction factor characteristics of horizontal tubes with helical rib,” Energy Convers. Manag., vol. 47, no. 18–19, pp. 3031–3044, Nov. 2006. DOI: 10.1016/j.enconman.2006.03.023.
   Web of Science ®Google Scholar
• A. Gupta, V. SriHarsha, S. V. Prabhu, and R. P. Vedula, “Local heat transfer distribution in a square channel with 90° continuous, 90° saw tooth profiled and 60° broken ribs,” Exp. Therm. Fluid Sci., vol. 32, no. 4, pp. 997–1010, Feb. 2008. DOI: 10.1016/j.expthermflusci.2007.11.015.
   Web of Science ®Google Scholar
• P. Promvonge and C. Thianpong, “Thermal performance assessment of turbulent channel flows over different shaped ribs,” Int. Commun. Heat Mass Transfer, vol. 35, no. 10, pp. 1327–1334, Dec. 2008. DOI: 10.1016/j.icheatmasstransfer.2008.07.016.
   Web of Science ®Google Scholar
• X. Li, J. A. Meng, and Z. Y. Guo, “Turbulent flow and heat transfer in discrete double inclined ribs tube,” Int. J. Heat Mass Transfer, vol. 52, no. 3–4, pp. 962–970, Jan. 2009. DOI: 10.1016/j.ijheatmasstransfer.2008.07.027.
   Web of Science ®Google Scholar
• V. SriHarsha, S. V. Prabhu, and R. P. Vedula, “Influence of rib height on the local heat transfer distribution and pressure drop in a square channel with 90° continuous and 60° V-broken ribs,” Appl. Therm. Eng., vol. 29, no. 11–12, pp. 2444–2459, Aug. 2009. DOI: 10.1016/j.applthermaleng.2008.12.015.
   Web of Science ®Google Scholar
• S. Kumar and R. S. Amano, “Experimental investigation of heat transfer and flow using V and broken V ribs within gas turbine blade cooling passage,” Heat Mass Transfer, vol. 51, no. 5, pp. 631–647,Oct. 2015. DOI: 10.1007/s00231-014-1436-8.
   Web of Science ®Google Scholar
• H. Chung et al., “Augmented heat transfer with intersecting rib in rectangular channels having different aspect ratios,” Int. J. Heat Mass Transfer, vol. 88, pp. 357–367, Sept. 2015. DOI: 10.1016/j.ijheatmasstransfer.2015.04.033.
   Web of Science ®Google Scholar
• N. Sharma, A. Tariq, and M. Mishra, “Experimental investigation of heat transfer enhancement in rectangular duct with pentagonal ribs,” Heat Transfer Eng., vol. 40, no. 1–2, pp. 147–165, 2019. DOI: 10.1080/01457632.2017.1421135.
   Web of Science ®Google Scholar
• S. Chokphoemphun, P. Promthaisong, N. Pipatpaiboon, and N. Onsalung, “Thermal augmentation in a force convective cabinet dryer using zigzag ribs fitted on air heater section,” Heat Transfer Eng., vol. 42, no. 15, pp. 1249–1267, 2021. DOI: 10.1080/01457632.2020.1785695.
   Web of Science ®Google Scholar
• N. Zheng, P. Liu, F. Shan, Z. Liu, and W. Liu, “Heat transfer enhancement in a novel internally grooved tube by generating longitudinal swirl flows with multi-vortexes,” Appl. Therm. Eng., vol. 95, pp. 421–432, Feb. 2016. DOI: 10.1016/j.applthermaleng.2015.11.066.
   Web of Science ®Google Scholar
• P. Promvonge and S. Eiamsa-ard, “Heat transfer behaviors in a tube with combined conical-ring and twisted-tape insert,” Int. Commun. Heat Mass Transfer, vol. 34, no. 7, pp. 849–859, 2007. DOI: 10.1016/j.icheatmasstransfer.2007.03.019.
   Web of Science ®Google Scholar
• P. Promvonge, “Thermal augmentation in a circular tube with twisted tape and wire coil turbulators,” Energy Convers. Manag., vol. 49, no. 11, pp. 2949–2955, 2008. DOI: 10.1016/j.enconman.2008.06.022.
   Web of Science ®Google Scholar
• S. Eiamsa-ard, S. Pethkool, C. Thianpong, and P. Promvonge, “Turbulent flow heat transfer and pressure loss in a double pipe heat exchanger with louvered strip inserts,” Int. Commun. Heat Mass Transfer, vol. 35, no. 2, pp. 120–129, Feb. 2008. DOI: 10.1016/j.icheatmasstransfer.2007.07.003.
   Web of Science ®Google Scholar
• S. Eiamsa-ard, P. Nivesrangsan, S. Chokphoemphun, and P. Promvonge, “Influence of combined non-uniform wire coil and twisted tape inserts on thermal performance characteristics,” Int. Commun. Heat Mass Transfer, vol. 37, no. 7, pp. 850–856, Aug. 2010. DOI: 10.1016/j.icheatmasstransfer.2010.05.012.
   Web of Science ®Google Scholar
• S. K. Saha, “Thermal and friction characteristics of laminar flow through rectangular and square ducts with transverse ribs and wire coil inserts,” Exp. Therm. Fluid Sci., vol. 34, no. 1, pp. 63–72, Jan. 2010. DOI: 10.1016/j.expthermflusci.2009.09.003.
   Web of Science ®Google Scholar
• P. Promvonge, T. Chompookham, S. Kwankaomeng, and C. Thianpong, “Enhanced heat transfer in a triangular ribbed channel with longitudinal vortex generators,” Energy Convers. Manag., vol. 51, no. 6, pp. 1242–1249, Jun. 2010. DOI: 10.1016/j.enconman.2009.12.035.
   Web of Science ®Google Scholar
• P. Promvonge, C. Khanoknaiyakarn, S. Kwankaomeng, and C. Thianpong, “Thermal behavior in solar air heater channel fitted with combined rib and delta-winglet,” Int. Commun. Heat Mass Transfer, vol. 38, no. 6, pp. 749–756, Jul. 2011. DOI: 10.1016/j.icheatmasstransfer.2011.03.014.
   Web of Science ®Google Scholar
• V. Kongkaitpaiboon, K. Nanan, and S. Eiamsa-ard, “Experimental investigation of heat transfer and turbulent flow friction in a tube fitted with perforated conical-rings,” Int. Commun. Heat Mass Transfer, vol. 37, no. 5, pp. 560–567, May 2010. DOI: 10.1016/j.icheatmasstransfer.2009.12.015.
   Web of Science ®Google Scholar
• S. Eiamsa-ard, S. V. Kongkaitpaiboon, and K. Nanan, “Thermohydraulic of turbulent flow through heat exchanger tubes fitted with circular-rings and twisted tapes, fluid dynamics and transport phenomenon,” Chin. J. Chem. Eng., vol. 21, no. 6, pp. 585–593, Jun. 2013. DOI: 10.1016/S1004-9541(13)60504-2.
   Web of Science ®Google Scholar
• T. Wenbin, Y. Tang, J. Hu, Q. Wang, and L. Lu, “Heat transfer and friction characteristics of laminar flow through a circular tube with small pipe inserts,” Int. J. Therm. Sci., vol. 96, pp. 94–101, Oct. 2015. DOI: 10.1016/j.ijthermalsci.2015.04.013.
   Web of Science ®Google Scholar
• T. Wenbin, T. Yong, Z. Bo, and L. Longsheng, “Experimental studies on heat transfer and friction factor characteristics of turbulent flow through a circular tube with small pipe inserts,” Int. Commun. Heat Mass Transfer, vol. 56, pp. 1–7, Aug. 2014. DOI: 10.1016/j.icheatmasstransfer.2014.04.020.
   Web of Science ®Google Scholar
• S. Pal and S. K. Saha, “Laminar fluid flow and heat transfer through a circular tube having spiral ribs and twisted tapes,” Exp. Therm. Fluid Sci., vol. 60, pp. 173–181, Jan. 2015. DOI: 10.1016/j.expthermflusci.2014.09.005.
   Web of Science ®Google Scholar
• S. Tamna, Y. Kaewkohkiat, S. Skullong, and P. Promvonge, “Heat transfer enhancement in tubular heat exchanger with double V-ribbed twisted-tapes,” Case Stud. Therm. Eng., vol. 7, pp. 14–24, Mar. 2016. DOI: 10.1016/j.csite.2016.01.002.
   Web of Science ®Google Scholar
• S. Skullong, P. Promvonge, C. Thianpong, and M. Pimsarn, “Heat transfer and turbulent flow friction in a round tube with staggered-winglet perforated-tapes,” Int. J. Heat Mass Transfer, vol. 95, pp. 230–242, Apr. 2016. DOI: 10.1016/j.ijheatmasstransfer.2015.12.007.
   Web of Science ®Google Scholar
• P. Liu, N. Zheng, F. Shan, Z. Liu, and W. Liu, “Numerical study on characteristics of heat transfer and friction factor in a circular tube with central slant rods,” Int. J. Heat Mass Transfer, vol. 99, pp. 268–282, Aug. 2016. DOI: 10.1016/j.ijheatmasstransfer.2016.03.059.
   Web of Science ®Google Scholar
• M. S. Emani, H. Ranjan, A. K. Bharti, J. P. Meyer, and S. K. Saha, “Laminar flow heat transfer enhancement in square and rectangular channels having: (1) A wire-coil, axial and spiral corrugation combined with helical screw-tape with and without oblique teeth and a (2) spiral corrugation combined with twisted tapes with oblique teeth,” Int. J. Heat Mass Transfer, vol. 114, no. 118707, pp. 18, Sept. 2019. DOI: 10.1016/j.ijheatmasstransfer.2019.118707.
   Web of Science ®Google Scholar
• S. Bhattacharyya, A. C. Benim, R. Bennacer, and K. Dey, “Influence of broken twisted tape on heat transfer performance in novel axial corrugated tubes: Experimental and numerical study,” Heat Transfer Eng., vol. 43, no. 3–5, pp. 437–462, 2022. DOI: 10.1080/01457632.2021.1875168.
   Web of Science ®Google Scholar
• S. Pethkool, S. Eiamsa-ard, S. Kwankaomeng, and P. Promvonge, “Turbulent heat transfer enhancement in a heat exchanger using helically corrugated tube,” Int. Commun. Heat Mass Transfer, vol. 38, no. 3, pp. 340–347, Mar. 2011. DOI: 10.1016/j.icheatmasstransfer.2010.11.014.
   Web of Science ®Google Scholar
• F. Andrade, A. S. Moita, A. Nikulin, A. L. N. Moreira, and H. Santos, “Experimental investigation on heat transfer and pressure drop of internal flow in corrugated tubes,” Int. J. Heat Mass Transfer, vol. 140, pp. 940–955, Sept. 2019. DOI: 10.1016/j.ijheatmasstransfer.2019.06.025.
   Web of Science ®Google Scholar
• Y. Hong, J. Du, S. Wang, W. Ye, and S. Huang, “Turbulent thermal-hydraulic and thermodynamic characteristics in a traverse corrugated tube fitted with twin and triple wire coils,” Int. J. Heat Mass Transfer, vol. 130, pp. 483–495, Oct. 2019. DOI: 10.1016/j.ijheatmasstransfer.2018.10.087.
   Web of Science ®Google Scholar