A New Two-Phase Multiplier for Flow Pressure Drop in Multiport Minichannel Condensers and Evaporators

References

• R. W. Lockhart and R. C. Martinelli, “Proposed correlation of data for isothermal two-phase, two-component flow in pipes,” Chem. Eng. Prog., vol. 45, no. 1, pp. 39–48, Jan. 1949.
   Web of Science ®Google Scholar
• L. F. Moody, “Friction factors for pipe flow,” Trans. Am. Soc. Mech. Eng., vol. 66, pp. 671–684, Nov. 1944.
   Google Scholar
• G. K. Filonenko, “Hydraulic resistance in pipes,” Teploenerg., vol. 4, no. 4, pp. 15–21, Jan. 1954.
   Google Scholar
• A. Cavallini, et al., “Two-phase frictional pressure gradient of R236ea, R134a, and R410A inside multiport mini-channels,” Exp. Therm. Fluid. Sci., vol. 29, no. 7, pp. 861–870, Aug. 2005. DOI: 10.1016/j.expthermflusci.2005.03.012.
   Web of Science ®Google Scholar
• C. Y. Park and P. Hrnjak, “CO2 flow condensation heat transfer and pressure drop in multiport microchannels at low temperatures,” Int. J. Refrig., vol. 32, no. 6, pp. 1129–1139, Sep. 2009. DOI: 10.1016/j.ijrefrig.2009.01.030.
   Web of Science ®Google Scholar
• K. Sakamatapan and S. Wongwises, “Pressure drop during condensation of R134a flowing inside a multiport minichannel,” Int. J. Heat Mass Transf., vol. 75, pp. 31–39, Aug. 2014. DOI: 10.1016/j.ijheatmasstransfer.2014.02.071.
   Web of Science ®Google Scholar
• A. L. Belchi, F. I. Gomez, J. R. C. Cascales and F. V. Garcia, “R32 heat transfer coefficient during condensation in a mini-channel multiport tube,” Presented at the 15th Int. Refrig. Air Cond. Conf. at Purdue, Purdue, USA, Jul. 14, 2014. article no. 2488 (10 pages)
   Google Scholar
• A. L. Belchi, F. I. Gomez, J. R. G. Cascales and F. V. Garcia, “R32 and R410A condensation heat transfer coefficient and pressure drop within minichannel multiport tube. Experimental technique and measurements,” Appl. Therm. Eng., vol. 105, pp. 118–131, Jul. 2016. DOI: 10.1016/j.applthermaleng.2016.05.143.
   Web of Science ®Google Scholar
• D. Jige, N. Inoue and S. Koyama, “Condensation of refrigerants in a multiport tube with rectangular minichannels,” Int. J. Refrig., vol. 67, pp. 202–213, Jul. 2016. DOI: 10.1016/j.ijrefrig.2016.03.020.
   Web of Science ®Google Scholar
• A. L. Belchi, F. I. Gomez, J. R. G. Cascales and F. V. Garcia, “Condensing two-phase pressure drop and heat transfer coefficient of propane in a horizontal multiport mini-channel tube: experimental measurements,” Int. J. Refrig., vol. 68, pp. 59–75, Aug. 2016. DOI: 10.1016/j.ijrefrig.2016.03.015.
   Web of Science ®Google Scholar
• T. Bohdal, H. Charun and M. Sikora, “Condensation of refrigerant R407C in multiport minichannel section,” Arch. Thermodyn., vol. 37, no. 4, pp. 3–18, 2016. DOI: 10.1515/aoter-2016-0024.
   Google Scholar
• A. L. Belchi and F. I. Gomez, “Evaluation of a condenser based on mini-channels technology working with R410A and R32. Experimental data and performance estimate,” Appl. Energy., vol. 202, pp. 112–124, Sep. 2017. DOI: 10.1016/j.apenergy.2017.05.122.
   Web of Science ®Google Scholar
• M. Rossato, J. D. Da Silva, G. Ribatski and D. Del Col, “Heat transfer and pressure drop during condensation of low-GWP refrigerants inside bar-and-plate heat exchangers,” Int. J. Heat Mass Transf., vol. 114, pp. 363–379, Nov. 2017. DOI: 10.1016/j.ijheatmasstransfer.2017.06.011.
   Web of Science ®Google Scholar
• M. M. Rahman, 2018. “Condensation heat transfer and pressure drop in horizontal rectangular multiport minichannels and small diameter microfin tubes,” Ph.D. dissertation, Dept. Sci. Adv. Tech., Saga University, Saga, Japan.
   Google Scholar
• N. H. Kim, “Condensation heat transfer and pressure drop of R-410A in flat aluminum multiport tubes,” Heat Mass Transf., vol. 54, no. 2, pp. 523–535, 2018. Feb DOI: 10.1007/s00231-017-2157-6.
   Web of Science ®Google Scholar
• P. Knipper, D. Bertsche, R. Gnieting and T. Wetzel, “Experimental investigation of heat transfer and pressure drop during condensation of R134a in multiport flat tubes,” Int. J. Refrig., vol. 98, pp. 211–221, Nov2019. DOI: 10.1016/j.ijrefrig.2018.10.019.
   Web of Science ®Google Scholar
• A. L. Belchi, “Assessment of a mini-channel condenser at high ambient temperatures based on experimental measurements working with R134a, R513A and R1234yf,” Appl. Therm. Eng., vol. 155, pp. 341–353, Apr. 2019. DOI: 10.1016/j.applthermaleng.2019.04.003.
   Web of Science ®Google Scholar
• D. Jige, N. Mikajiri, S. Kikuchi and N. Inoue, “Condensation heat transfer and pressure drop of R32/R1123 inside horizontal multiport extruded tubes,” Int. J. Refrig., vol. 120, pp. 200–208, Sep. 2020. DOI: 10.1016/j.ijrefrig.2020.08.029.
   Google Scholar
• M. Kruzel, T. Bohdal and M. Sikora, “Heat transfer and pressure drop during refrigerants condensation in compact heat exchangers,” Int. J. Heat Mass Transf., vol. 161, no. 120283, pp. 120283, Aug. 2020. DOI: 10.1016/j.ijheatmasstransfer.2020.120283.
   Google Scholar
• H. Nalbandian, C. Y. Yang and K. T. Chen, “Effect of channel size and shape on condensation heat transfer of refrigerants HFO-1234yf and HFC-134a in rectangular microchannels,” Int. J. Heat Mass Transf., vol. 161, no. 120314, pp. 120314, Aug. 2020. DOI: 10.1016/j.ijheatmasstransfer.2020.120314.
   Google Scholar
• C. H. Kim, Y. Shah and N. H. Kim, “Condensation heat transfer and pressure drop of low GWP R-404A alternative refrigerants in a multiport tube,” Int. J. Heat Mass Transf., vol. 179, no. 121722, pp. 121722, Jul. 2021. DOI: 10.1016/j.ijheatmasstransfer.2021.121722.
   Google Scholar
• K. Mishima and T. Hibiki, “Some characteristics of air-water two-phase flow in small diameter vertical tubes,” Int. J. Multiph Flow., vol. 22, no. 4, pp. 703–712, 1996. DOI: 10.1016/0301-9322(96)00010-9.
   Web of Science ®Google Scholar
• W. Zhang, “Study on constitutive equations for flow boiling in mini-channels,” Ph.D. thesis, 2006. Dept. Mech. Eng., Kyoto Univ., Kyoto, Japan.
   Google Scholar
• J. Lee and I. Mudawar, “Two-phase flow in high heat flux micro-channel heat sink for refrigeration cooling applications: Part I - pressure drop characteristics,” Int. J. Heat Mass Transf., vol. 48, no. 5, pp. 928–940, 2005. DOI: 10.1016/j.ijheatmasstransfer.2004.09.018.
   Web of Science ®Google Scholar
• T. N. Tran, M. C. Chyu, M. W. Wambsganss and D. M. France, “Two-phase pressure drop of refrigerants during flow boiling in small channels and experimental investigation and correlation development,” Int. J. Multiph. Flow., vol. 26, no. 11, pp. 1739–1754, Nov. 2000. DOI: 10.1016/S0301-9322(99)00119-6.
   Web of Science ®Google Scholar
• M. Zhang and R. L. Webb, “Correlation of two-phase friction factor for refrigerants in small-diameter tubes,” Exp. Therm. Fluid Sci., vol. 25, no. 3–4, pp. 131–139, 2001. DOI: 10.1016/S0894-1777(01)00066-8.
   Web of Science ®Google Scholar
• L. Sun and K. Mishima, “Evaluation analysis of prediction methods for two-phase flow pressure drop in mini-channels,” Int. J. Multiph. Flow., vol. 35, no. 1, pp. 47–54, 2009. DOI: 10.1016/j.ijmultiphaseflow.2008.08.003.
   Web of Science ®Google Scholar
• D. Chisholm, “Pressure gradients due to friction during the flow of evaporating two-phase mixtures in smooth tubes and channels,” Int. J. Heat Mass Transf., vol. 16, no. 2, pp. 347–358, 1973. DOI: 10.1016/0017-9310(73)90063-X.
   Web of Science ®Google Scholar
• R. Yun, J. H. Heo and Y. Kim, “Evaporative heat transfer and pressure drop of R410A in microchannels,” Int. J. Refrig., vol. 29, no. 1, pp. 92–100, 2006. DOI: 10.1016/j.ijrefrig.2005.08.005.
   Web of Science ®Google Scholar
• J. Kaew-On and S. Wongwises, “New proposed two-phase multiplier and evaporation heat transfer coefficient correlations for R134 flowing at low mass flux in a multiport minichannel,” Int. Comm. Heat Mass Transf., vol. 39, no. 6, pp. 853–860, Jul. 2012. DOI: 10.1016/j.icheatmasstransfer.2012.04.015.
   Web of Science ®Google Scholar
• F. R. Rivera, A. L. Belchi, F. R. Garcia and F. I. Gomez, “Two-phase flow pressure drop in multiport mini-channel tubes using R134a and R32 as working fluids,” Int. J. Therm. Sci., vol. 92, pp. 17–33, Jun. 2015. DOI: 10.1016/j.ijthermalsci.2015.01.014.
   Web of Science ®Google Scholar
• M. M. Rahman, K. Bashar, Y. Kudo, K. Kariya and A. Miyara, “Experimental adiabatic two-phase pressure drop of R134a flowing inside a multiport minichannel,” Presented at the 7th Int. Conf. on Thermal Engineering, Dhaka, Bangladesh, Dec. 22, 2016. DOI: 10.1063/1.4984688.
   Google Scholar
• N. B. Chien, K. I. Choi, J. T. Oh and H. Cho, “An experimental investigation of flow boiling heat transfer coefficient and pressure drop of R410A in various minichannel multiport tubes,” Int. J. Heat Mass Transf., vol. 127, no. A, pp. 675–686, Dec. 2018. DOI: 10.1016/j.ijheatmasstransfer.2018.06.145.
   Google Scholar
• W. Gao, X. Xu and X. Liang, “Flow boiling of R134a in an open-cell metal foam mini-channel evaporator,” Int. J. Heat Mass Transf., vol. 126, part A, pp. 103–115, Nov. 2018. DOI: 10.1016/j.ijheatmasstransfer.2018.04.125.
   Google Scholar
• D. Jige, S. Kikuchi, H. Eda and N. Inoue, “Flow boiling in horizontal tube: Development of new heat transfer model for rectangular minichannels,” Int. J. Heat Mass Transf., vol. 144, no. 118668, pp. 118668, Dec. 2019. DOI: 10.1016/j.ijheatmasstransfer.2019.118668.
   Google Scholar
• N. B. Chien, P. Q. Vu and J. T. Oh, “Two-phase flow boiling heat transfer coefficient and pressure drop of R-717 and R-290 inside minichannel multiport tube,” Presented at 11th Int. Conf. on Applied Energy, Vasteras, Sweden, Aug. 12–15, 2019. article no. 908.
   Google Scholar
• D. Jige, S. Kikuchi, N. Mikajiri and N. Inoue, “Flow boiling heat transfer of zeotropic mixture R1234yf/R32 inside a horizontal multiport tube,” Int. J. Refrig., vol. 119, pp. 390–400, Nov. 2020. DOI: 10.1016/j.ijrefrig.2020.04.036.
   Google Scholar
• M. Klugmann, P. Dabrowski and D. Mikielewicz, “Flow distribution and heat transfer in minigap and minichannel heat exchangers during flow boiling,” Appl. Therm. Eng, vol. 181, no. 116034, pp. 116034, Nov. 2020. DOI: 10.1016/j.applthermaleng.2020.116034.
   Google Scholar
• C. Nguyen, P. Q. Vu, C. Kwang II and O. J. Taek, “Heat transfer coefficient and pressure drop of R410A during evaporation inside aluminum multiport minichannels,” Presented at the 14th ASME Int. Conf. on Energy Sustainability, San Diego, CA, June 28, 2015. pp. 1–8. DOI: 10.1115/ES2015-49110.
   Google Scholar
• B. Sunden, J. Meyer, J. Dirker, B. John and Y. Mukkamala, “Local measurements in heat exchangers: a systematic review and regression analysis,” Heat Transf. Eng., vol. 43, no. 18, pp. 37, 2021. DOI: 10.1080/01457632.2021.1989836.
   Web of Science ®Google Scholar
• S. M. Kim and I. Mudawar, “Universal approach to predicting two-phase frictional pressure drop for adiabatic and condensing mini/macro-channel flows,” Int. J. Heat Mass Transf, vol. 55, no. 11–12, pp. 3246–3261, May 2012. DOI: 10.1016/j.ijheatmasstransfer.2012.11.045.
   Web of Science ®Google Scholar
• K. I. Choi, A. S. Pamitran, C. Y. Oh and J. T. Oh, “Two-phase pressure drop of R-410A in horizontal smooth minichannels,” Int. J. Refrig, vol. 31, no. 1, pp. 119–129, 2008. DOI: 10.1016/j.ijrefrig.2007.06.006.
   Web of Science ®Google Scholar
• S. Saha, J. Khan and T. Farouk, “Numerical study of evaporation assisted hybrid cooling for thermal powerplant application,” Appl. Therm. Eng, vol. 166, no. 114677, pp. 9, Feb. 2020. DOI: 10.1016/j.applthermaleng.2019.114677.
   Google Scholar
• G. Qiu, M. Li and W. Cai, “The effect of inclined angle on flow, heat transfer and refrigerant charge of R290 condensation in a minichannel,” Int. J. Heat Mass Transf., vol. 154, no. 119652, pp. 119652, Jun. 2020. DOI: 10.1016/j.ijheatmasstransfer.2020.119652.
   Google Scholar
• I. Basler, M. Wirth, H. Reister, R. Rossman and B. Weigand, “Numerical modeling and experimental validation of heat and mass transfer inside charge air coolers with water condensation,” Int. J. Heat Mass Transf., vol. 190, no. 122720, pp. 122720, Jul. 2022. DOI: 10.1016/j.ijheatmasstransfer.2022.122720.
   Google Scholar
• A. Mukherjee, D. N. Basu and P. K. Mondal, “Mesoscopic characterization of bubble dynamics in subcooled flow boiling following a pseudo-potential based approach,” Int. J. Multiph. Flow., vol. 148, no. 103923, pp. 103923, Mar. 2022. DOI: 10.1016/j.ijmultiphaseflow.2021.103923.
   Google Scholar
• M. Unverdi, “Prediction of heat transfer coefficient and friction factor of mini channel shell and tube heat exchanger using numerical analysis and experimental validation,” Int. J. Therm. Sci, vol. 171, no. 107182, pp. 15, Jan. 2022. DOI: 10.1016/j.ijthermalsci.2021.107182.
   Google Scholar
• A. K. Sadaghiani, “Numerical and experimental studies on flow condensation in hydrophilic microtubes,” Appl. Therm. Eng, vol. 197, no. 117359, pp. 117359, Oct. 2021. DOI: 10.1016/j.applthermaleng.2021.117359.
   Google Scholar
• C. H. Kim and N. H. Kim, “Condensation heat transfer and pressure drop characteristics of low GWP R-404A alternative refrigerants in a multiport tube having axial microfins,” Int. J. Heat Mass Transf, vol. 188, no. 122624, pp. 122624, Jun. 2022. DOI: 10.1016/j.ijheatmasstransfer.2022.122624.
   Google Scholar
• C. Y. Yang and R. L. Webb, “Friction pressure drop of R-12 in small hydraulic diameter extruded aluminum tubes with and without micro-fins,” Int. J. Heat Mass Transf, vol. 39, no. 4, pp. 801–809, Mar. 1996. DOI: 10.1016/0017-9310(95)00151-4.
   Web of Science ®Google Scholar
• S. M. Ammar, et al., “Experimental investigation of condensation pressure drop of R134a in smooth and grooved multiport flat tubes of automotive heat exchanger,” Int. J. Heat Mass Transf., vol. 130, pp. 1087–1095, Mar. 2019. DOI: 10.1016/j.ijheatmasstransfer.2018.11.018.
   Web of Science ®Google Scholar
• P. Knipper, J. Arnsberg, D. Bertsche, R. Gneiting and T. Wetzel, “Modeling of condensation pressure drop for R134a and R134a-lubricant-mixtures in multiport flat tubes,” Int. J. Refrig, vol. 113, pp. 239–248, May. 2020. DOI: 10.1016/j.ijrefrig.2020.01.007.
   Google Scholar
• J. Heo, H. Park and R. Yun, “Comparison of condensation heat transfer and pressure drop of CO2 in rectangular microchannels,” Int. J. Heat Mass Transf, vol. 65, pp. 719–726, Oct. 2013. DOI: 10.1016/j.ijheatmasstransfer.2013.06.064.
   Web of Science ®Google Scholar
• D. Jige, S. Kikuchi, H. Eda and N. Inoue, “Effect of lubricant oil on boiling heat transfer flow patterns of R32 inside a multiport tube,” Exp. Therm. Fluid Sci, vol. 117, no. 110146, pp. 110146, Sep. 2020. DOI: 10.1016/j.expthermflusci.2020.110146.
   Google Scholar
• H. Eda, D. Jige and N. Inoue, “Experimental study of boiling heat transfer and pressure drop of R32 inside horizontal multiport tube with circular minichannels,” J. JIME, vol. 53, no. 3, pp. 174–179, 2018.
   Google Scholar
• C. H. Kim and N. H. Kim, “Evaporation heat transfer and pressure drop of low GWP R-404A alternative refrigerants in a multiport tube,” Int. J. Heat Mass Transf, vol. 184, no. 122386, pp. 122386, Mar. 2022. DOI: 10.1016/j.ijheatmasstransfer.2021.122386.
   Google Scholar