Coatings to Reduce Fouling in Plate Heat Exchangers: Two Case Studies

References

• U. B. Deshannava, M. S. Rafeen, M. Ramasamy, and D. Subbarao, “Crude oil fouling: a Review,” J. Appl. Sci., vol. 10, no. 24, pp. 3167–3174, 2010. DOI: 10.3923/jas.2010.3167.3174.
   Google Scholar
• A. M. Liaquat et al., “Impact of palm biodiesel blend on injector deposit formation,” Appl. Energy, vol. 111, pp. 882–893, Nov. 2013. DOI: 10.1016/j.apenergy.2013.06.036.
   Web of Science ®Google Scholar
• P. Ulmgren and R. Rådeström, “A steady state model describing the solubility of calcium oxalate in D (chlorine dioxide stage)-filtrates,” Nordic Pulp Paper Res. J., vol. 16, no. 4, pp. 389–395, 2001. DOI: 10.3183/npprj-2001-16-04-p389-395.
   Web of Science ®Google Scholar
• P. Ulmgren, “Non-process elements in a bleached kraft pulp mill with a higher degree of system closure – state of the art,” Nordic Pulp Paper Res. J., vol. 12, no. 1, pp. 32–41, 1997. DOI: 10.3183/npprj-1997-12-01-p032-041.
   Google Scholar
• M. Häära, A. Sundberg, and S. Willför, “Paper chemistry: calcium oxalate – a source of “hickey” problems – a literature review on oxalate formation, analysis and scale formation,” Nordic Pulp Paper Res. J., vol. 26, no. 3, pp. 263–282, 2011. DOI: 10.3183/npprj-2011-26-03-p263-282.
   Web of Science ®Google Scholar
• P. Ulmgren and R. Rådeström, “Solubility of calcium oxalate in the presence of magnesium ions and solubility of magnesium oxalate in sodium chlorine medium,” Nordic Pulp Paper Res. J., vol. 14, no. 4, pp. 330–335, 1999. DOI: 10.3183/npprj-1999-14-04-p330-335.
   Web of Science ®Google Scholar
• H. Muller-Steinhagen, Handbook of Heat Exchanger Fouling and Mitigation and Cleaning Technologies, Germany: Publico Publications, 2000.
   Google Scholar
• The U.S. Department of Energy, “Non-chemical Technologies for Scale and Hardness Control”, New Technology Demonstration Program Technology Alert, No. DOE/EE-0162, 1998. Available: http://www.fractalfield.com/implodermagneticresearch/FedTechonMAGNETICS.pdf
   Google Scholar
• L. D. Tijing et al., “Mitigation of scaling in heat exchangers by physical water treatment using zinc and tourmaline,” Appl. Therm. Eng., vol. 31, no. 11–12, pp. 2025–2031, Aug . 2011. DOI: 10.1016/j.applthermaleng.2011.03.011.
   Web of Science ®Google Scholar
• B. Akin, M. Öner, Y. Bayram, and K. D. Demandis, “Effects of carboxylate-modified, “green” inulin biopolymers on the crystal growth of calcium oxalate,” Cryst. Growth Des., vol. 8, no. 6, pp. 1997–2005, Apr. 2008. DOI: 10.1021/cg800092q.
   Web of Science ®Google Scholar
• O. Santos et al., “Minimizing crude oil fouling by modifying the surface of heat exchangers with a flexible ceramic coating,” Presented at the X Heat Exchanger Fouling & Cleaning Conference, Budapest, Hungary, Jun. 2013.
   Google Scholar
• O. Santos, C. Wictor, A. Tornqvist, and M. Nilsson, “2Performance of flexible ceramic coated surfaces subjected to crude oil fouling,” Presented at the XI Heat Exchanger Fouling & Cleaning Conference, Dublin, Ireland, Jun. 2015.
   Google Scholar
• O. Santos, J. Anehamre, and M. Nilsson, “Minimizing calcium carbonate scaling by modifying the surface of heat exchangers with flexible ceramic coatings,” Presented at the IX Heat Exchanger Fouling & Cleaning Conference, Dublin, Ireland, Jun. 2015.
   Google Scholar
• S. Höft, S. Grahn, I. Bialuch, W. Augustin, and S. Scholl, “Low fouling heat exchanger for biofuel usage in combined heat and power units,” Heat Transf. Eng., vol. 41, no. 4, pp. 311–323, 2020. DOI: 10.1080/01457632.2018.1540452.
   Web of Science ®Google Scholar
• V. Oldani, C. L. Bianchi, S. Biella, C. Pirola, and G. Cattaneo, “Perfluoropolymer coatings design for fouling reduction on heat transfer stainless steel surfaces,” Heat Transf. Eng., vol. 37, no. 2, pp. 210–219, 2016. DOI: 10.1080/01457632.2015.1044417.
   Web of Science ®Google Scholar
• Z. Liu, Z. Chen, W. Li, Z. Ding, and Z. Xu, “Composite fouling characteristics om Ni-P-PTFE nanocomposite surfaces in corrugated plate heat exchangers,” Heat Transf. Eng., vol. 42, no. 22, pp. 1877–1888, 2021. DOI: 10.1080/01457632.2020.1834202.
   Web of Science ®Google Scholar
• M. Alahmad, “Factors affecting scale formation in sea water environments – An experimental approach,” Chem. Eng. Technol., vol. 31, no. 1, pp. 149–156, Jan. 2008. DOI: 10.1002/ceat.200700062.
   Web of Science ®Google Scholar
• N. Epstein, “Fouling of augmented surfaces – conceptually,” in Fouling of Heat Exchangers, J. Taborek, G.F. Hewitt, and N. Afgan, Eds. London, England: Hemisphere Publishing, 1983.
   Google Scholar
• M. Bohnet, “Influence of the transport properties of the crystal/heat transfer surface interfacial on fouling behavior,” Chem. Eng. Technol., vol. 26, no. 10, pp. 1055–1060, Oct. 2003. DOI: 10.1002/ceat.200301807.
   Web of Science ®Google Scholar
• Q. Yang, D. Q. Xu, and Z. Shen, “A theoretical analysis and experimental study of the induction period of calcium carbonate scaling,” J. Chem. Indus. Eng. (China), vol. 45, pp. 199–205, 1994.
   Google Scholar
• Q. Yang, J. Ding, and Z. Shen, “SAM (self-assembled monolayer) heat transfer surface fouling behavior and fouling fractal characteristics,” Mitigation of Heat Exchanger Fouling Conference, Banff, Canada, 1999.
   Google Scholar
• W. C. Cheong, P. H. Gaskell, and A. Neville, “Substrate effect on surface adhesion/crystallization of calcium carbonate,” J. Crystal Growth, vol. 363, pp. 7–21, Jan . 2013. DOI: 10.1016/j.jcrysgro.2012.09.025.
   Web of Science ®Google Scholar
• Q. Zhao and H. Müller-Steinhagen, “Intermolecular and adhesion forces of deposits on modified heat transfer surfaces,” Proceeding of the 4th International Conference on Heat Exchanger Fouling, Fundamental Approaches & Technical Solutions, Davos, 2001.
   Google Scholar
• D. P. Dowling, C. E. Nwankire, M. Riihimaki, R. Keiski, and U. Nylen, “Evaluation of the anti-fouling properties of nm thick atmospheric plasma deposited coatings,” Surface Coating Tech., vol. 205, no. 5, pp. 1544–1551, Nov. 2010. DOI: 10.1016/j.surfcoat.2010.10.010.
   Web of Science ®Google Scholar