Thermo-Mechanics and Microstructure Evolution in Manufacturing Simulations

REFERENCES

• K. Roll , Simulation of Sheet Metal Forming—Necessary Developments in the Future, Numisheet 2008, Interlaken, Switzerland , p. 59 , 2008 .
   Google Scholar
• H. Karbasian and A. E. Tekkaya , A Review on Hot Stamping , Journal of Materials Processing Technology , vol. 210 , p. 2103 , 2010 .
   Web of Science ®Google Scholar
• K. Sawamiphakdi , P. Pauskar , and G. Lahoti , Applications of Finite Element Modeling in Industrial Forming Processes at the Timken Conpany, Materials Processing and Design: Modeling, Simulation and Applications – NUMIFORM 2004, Columbus, Ohio, p. 2004.
   Google Scholar
• D. Berglund , Validation of Models for Welding and Post Weld Heat Treatment in Product Development of Aerospace Components, Doctoral Thesis, Department of Applied Physics and Mechanical Engineering, Lulea University of Technology, Lulea, Sweden, 2003.
   Google Scholar
• A. Lundbäck , Modelling and Simulation of Welding and Metal Deposition Journal, PhD, Department of Applied Physics and Mechanical Engineering, Lulea University of Technology, Lulea, Sweden, 2010.
   Google Scholar
• M. Vazjr Jr ., D. Owen , V. Kalhori , M. Lundblad , and L.-E. Lindgren , Modelling and Simulation of Machining Processes , Arch. Comput. Methods Eng. , vol. 14 , p. 173 , 2007 .
   Web of Science ®Google Scholar
• L.-E. Lindgren , V. Kalhori, and M. Lundblad, Machining Simulations and Their Use in Industry, VII International Conference on Computational Plasticity COMPLAS 2005, Barcelona, September 5–8, 2005.
   Google Scholar
• V. Kalhori , D. Wedberg , and L.-E. Lindgren , Simulation of Mechanical Cutting Using a Physical Based Material Model , International Journal of Material Forming , vol. 3 , p. 511 , 2010 .
   Google Scholar
• H. Tersing , J. Lorentzon , A. Francois , A. Lundbäck , B. Babu , J. Barboza , V. Bäcker , and L. E. Lindgren , Simulation of Manufacturing Chain of a Titanium Aerospace Component with Experimental Validation , Finite Elements in Analysis and Design , vol. 51 , p. 10 , 2012 .
   Web of Science ®Google Scholar
• L.-E. Lindgren , Computational Welding Mechanics, Thermomechanical and Microstructural Simulations , Woodhead Publishing , Cambridge , 2007 .
   Google Scholar
• D. Berglund and H. Alberg , A Two-Stage Approach for Validation of Welding- and Heat Treatment Models in Product Development , Science and Technology of Welding and Joining , vol. 10 , p. 653 , 2005 .
   Web of Science ®Google Scholar
• D. Berglund , H. Alberg , and H. Runnemalm , Simulation of Welding and Stress Relief Heat Treatment of An Aero Engine Component , Finite Elements in Analysis and Design , vol. 39 , p. 865 , 2003 .
   Web of Science ®Google Scholar
• L.-E. Lindgren , H. Alberg , and K. Domkin , Constitutive Modelling , and Parameter Optimisation , Journal , vol. , p. , 2003 .
   Google Scholar
• H. Alberg and D. Berglund , Comparison of Plastic, Viscoplastic, and Creep Models When Modelling Welding and Stress Relief Heat Treatment , Computer Methods in Applied Mechanics and Engineering , vol. 192 , p. 5189 , 2003 .
   Web of Science ®Google Scholar
• H. Alberg and D. Berglund , Corrigendum to: Comparison of Plastic, Viscoplastic, and Creep Models When Modelling Welding and Stress Relief Heat Treatment , Computer Methods in Applied Mechanics and Engineering , vol. 193 , p. 5063 , 2004 .
   Web of Science ®Google Scholar
• J. B. Leblond , J. Devaux and J. C. , Devaux , Mathematical Modelling of Transformation Plasticity in Steels I: Case of Ideal-Plastic Phases , International Journal of Plasticity , vol. 5 , p. 551 , 1989 .
   Web of Science ®Google Scholar
• R. Lewis , K. Morgan , H. Thomas , and K. Seetharamu , The Finite Element Method in Heat Transfer Analysis , John Wiley & Sons , New York , 1996 .
   Google Scholar
• K.-J. Bathe , Finite Element Procedures , Prentice-Hall , Englewood Cliffs , NJ , 1996 .
   Google Scholar
• R. Lewis , P. Nithiarasu , and K. Seetharamu , Fundamentals of the Finite Element Method for Heat Transfer and Fluid Flow , John Wiley & Sons , New York , 2004 .
   Google Scholar
• T. Belytschko , An Overview of Semidiscretization , and Time Procedures , in T. Belytschko , K.-J. Bathe (Eds.), Computational Methods in Mechanics , North-Holland , Amsterdam , p. 3 , 1983 .
   Google Scholar
• T. Hughes , Analysis of Transient Algorithms with Particular Reference to Stability Behavior , in T. Belytschko , T. Hughes (Eds.), Computational Methods for Transient Analysis , North-Holland , p. 68 , 1983.
   Google Scholar
• B. A. B. Andersson , Thermal Stresses in a Submerged-Arc Welded Joint Considering Phase Transformations , ASME Journal of Engineering Materials & Technology , vol. 100 , p. 356 , 1978 .
   Web of Science ®Google Scholar
• M. Jonsson , L. Karlsson , and L.-E. Lindgren , Deformations, and Stresses in Butt-Welding of Large Plates , in R. Lewis (Ed.), Numerical Methods in Heat Transfer , Wiley , New York , p. 35 , 1985 .
   Google Scholar
• L. Karlsson , Thermal Stresses in Welding , in R. B. Hetnarski (Ed.), Thermal Stresses , Elsevier Science Publishers , Amsterdam , p. 300 , 1986 .
   Google Scholar
• W. D. Rolph and K.-J. Bathe , An Efficient Algorithm for Analysis of Non-Linear Heat Transfer with Phase Changes , International Journal of Numerical Methods in Engineering , vol. 18 , p. 119 , 1982 .
   Web of Science ®Google Scholar
• Y. V. L. N. Murthy , G. V. Rao , and P. K. Iyer , Numerical Simulation of Welding and Quenching Processes Using Transient Thermal and Thermo-Elasto-Plastic Formulations , Computers & Structures , vol. 60 , p. 131 , 1996 .
   Web of Science ®Google Scholar
• L.-E. Lindgren , H. Runnemalm , and M. O. Nässtrom , Simulation of Multipass Welding of a Thick Plate , International Journal for Numerical Methods in Engineering , vol. 44 , p. 1301 , 1999 .
   Web of Science ®Google Scholar
• Y. Fung , Foundations of Solid Mechanics , Prentice-Hall , Englewood Cliffs , NJ , 1965 .
   Google Scholar
• L. E. Malvern , Introduction to the Mechanics of a Continuous Medium , Prentice-Hall , Englewood Cliffs , NJ , 1969 .
   Google Scholar
• T. Chung , Applied Continuum Mechanics , Cambridge University Press , Cambridge , 1996 .
   Google Scholar
• J. Bonet and R. D. Wood , Non-Linear Continuum Mechanics for Finite Element Analysis , Cambridge University Press , Cambridge , 1997 .
   Google Scholar
• T. Belytschko , W. K. Liu , and B. Moran , Non-Linear Finite Elements for Continua and Structures , John Wiley & Sons , New York , 2000 .
   Google Scholar
• M. A. Crisfield , Non-Linear Finite Element Analysis of Solids and Structures, Volume 1: Essentials , John Wiley & Sons , Chichester , UK , 1991 .
   Google Scholar
• M. A. Crisfield , Non-Linear Finite Element Analysis of Solids and Structures, Volume 2: Advanced Topics, John Wiley & Sons, 1997.
   Google Scholar
• J. C. Simo and T. J. R. Hughes , Computational Inelasticity , Springer-Verlag , New York , 1997 .
   Google Scholar
• J. Simo and R. Taylor , Consistent Tangent Operators for Rate-Independent Elastoplasticity , Computer Methods in Applied Mechanics and Engineering , vol. 48 , p. 101 , 1985 .
   Web of Science ®Google Scholar
• J. P. Ponthot , Unified Stress Update Algorithms for the Numerical Simulation of Large Deformation Elasto-Plastic and Elasto-Viscoplastic Processes , International Journal of Plasticity , vol. 18 , p. 91 , 2002 .
   Web of Science ®Google Scholar
• M. Fisk and A. Lundbäck , Simulation and Validation of Repair Welding and Heat Treatment of An Alloy 718 Plate , Finite Elements in Analysis and Design , vol. 58 , p. 66 , 2012 .
   Web of Science ®Google Scholar
• L.-E. Lindgren , K. Domkin , and S. Hansson , Dislocations, Vacancies and Solute Diffusion in Physical Based Plasticity Model for AISI 316 L , Mechanics of Materials , vol. 40 , p. 907 , 2008 .
   Web of Science ®Google Scholar
• E. Nembach , S. Schänzer , W. Schröer , and K. Trinckauf , Hardening of Nickel-Base Superalloys by High Volume Fractions of [Gamma]’-Precipitates , Acta Metallurgica , vol. 36 , p. 1471 , 1988 .
   Google Scholar
• M. Perez , M. Dumont , and D. Acevedo-Reyes , Implementation of Classical Nucleation and Growth Theories for Precipitation , Acta Materialia , vol. 56 , p. 2119 , 2008 .
   Web of Science ®Google Scholar
• A. Lundbäck , Modelling of Metal Deposition, Finite Element in Analysis and Design , vol. 47, pp. 1169–1177, 2011.
   Web of Science ®Google Scholar
• A. Svoboda , D. Wedberg , and L.-E. Lindgen , Simulation of Metal Cutting Using a Physically Based Plasticity Model , Modelling and Simulation in Materials Science and Engineering , vol. 18 , p. 075005 , 2010 .
   Google Scholar
• D. Wedberg , A. Svoboda , and L.-E. Lindgren , Modelling High Strain Rate Phenomena in Metal Cutting Simulation , Modelling and Simulation in Materials Science and Engineering , vol. 20 , p. 085006 , 2012 .
   Web of Science ®Google Scholar
• H. J. Frost and M. F. Ashby , Deformation-Mechanism Maps – The Plasticity and Creep of Metals and Ceramics , Pergamon Press , Oxford , 1982 .
   Google Scholar
• L.-E. Lindgren , D. Wedberg, and A. Svoboda, Verification and Validation of Machining Simulations for Sufficient Accuracy, X International Conference of Computational Plasticity, COMPAS X, Barcelona, September 2–4, 2009.
   Google Scholar
• W. L. Oberkampf , T. G. Trucano , and C. Hirsch , Verification, Validation, and Predictive Capability in Computational Engineering and Physics , Applied Mechanics Reviews , vol. 57 , p. 345 , 2004 .
   Google Scholar