Failure Assessment of Laser Spot-Welded Electronic Connector Structures

REFERENCES

• A. M. El-Batahgy , Effect of Laser Welding Parameters on Fusion Zone Shape and Solidification Structure of Austenitic Stainless Steels , Materials Letters , vol. 32 , pp. 155 – 163 , 1997 .
   Web of Science ®Google Scholar
• W. S. Chang and S. J. Na , Prediction of Laser-Spot-Weld Shape by Numerical Analysis and Neural Network , Metallurgical and Materials Transactions , vol. 32 , pp. 723 – 731 , 2001 .
   Web of Science ®Google Scholar
• W. S. Chang and S. J. Na , A Study on the Prediction of the Laser Weld Shape with Varying Heat Source Equations and the Thermal Distortion of a Small Structure in Micro-joining , Journal of Materials Processing Technology , vol. 120 , pp. 208 – 214 , 2001 .
   Web of Science ®Google Scholar
• X. He , P. W. Fuerschbach , and T. DebRoy , Heat Transfer and Fluid Flow During Laser Spot Welding of 304 Stainless Steel , Journal of Applied Physics , vol. 36 , pp. 1388 – 1398 , 2003 .
   Web of Science ®Google Scholar
• K. Kazemi and A. J. Goldak , Numerical Simulation of Laser Full Penetration Welding , Computational Materials Science , vol. 44 , pp. 841 – 849 , 2007 .
   Web of Science ®Google Scholar
• X. Kong , Q. Yang , B. Li , G. Rothwell , R. English , and X. J. Ren , Numerical Study of Strengths of Spot-welded Joints of Steel , Materials and Design , vol. 29 , pp. 1554 – 1561 , 2008 .
   Web of Science ®Google Scholar
• D. Lee and E. Kannatey-Asibu , Jr., Numerical Analysis on the Feasibility of Laser Microwelding of Metals by Femtosecond Laser Pulsed Using ABAQUS , Journal of Manufacturing Science and Engineering , vol. 130 , pp. 0610141 – 06101412 , 2008 .
   Google Scholar
• D. Lee and E. Kannatey-Asibu , Jr., Numerical Analysis of Ultrashort Pulse Laser-material Interaction Using ABAQUS , Journal of Manufacturing Science and Engineering , vol. 131 , pp. 0210051 – 02100515 , 2009 .
   Google Scholar
• P. Martinson , S. Daneshpour , M. Kocak , S. Riekehr , and P. Staron , Residual Stress Analysis of Laser Spot Welding of Steel Sheets , Materials and Design , vol. 30 , pp. 3351 – 3359 , 2009 .
   Web of Science ®Google Scholar
• N. S. Bailey , W. Tan , and Y. C. Shih , Predictive Modeling and Experimental Results for Residual Stresses in Laser Hardening of AISI 4140 Steel by a High Power Diode Laser , Surface & Coatings Technology , vol. 203 , pp. 2003 – 2012 , 2009 .
   Web of Science ®Google Scholar
• V. A. Ventrella , J. B. Roberto , and W. Rossib , Pulsed Nd:YAG Laser Seam Welding of SUS316 L Stainless Steel Thin Foil , Journal of Materials Processing Technology , vol. 14 , pp. 1838 – 1843 , 2010 .
   Web of Science ®Google Scholar
• J. Lee , K. Asim , and J. Pan , Modeling of Failure Mode of Laser Welds in Lap-Shear Specimens , Engineering Fracture Mechanics , vol. 78 , pp. 374 – 396 , 2010 .
   Web of Science ®Google Scholar
• J. H. Kuang , T. P. Hung , and C. K. Chen , A Keyhole Volumetric Model for Weld Pool Analysis in Nd:YAG Pulsed Laser Welding , Optics & Laser Technology , vol. 44 , pp. 1521 – 1528 , 2012 .
   Web of Science ®Google Scholar
• J. Ma , F. Kong , and R. Kovacevic , Finite-Element Thermal Analysis of Laser Welding of Galvanized High-Strength Steel in a Zero-Gap Lap Joint Configuration and its Experimental Verification, Materials and Design , vol. 36, pp. 348–358, 2012.
   Web of Science ®Google Scholar
• F. Kong , S. Santhanakrishnan , and R. Kovacevic , Numerical Modeling and Experimental Study of Thermally Induced Residual Stress in the Direct Diode Laser Heat Treatment of Dual-Phase 980 steel , International Journal of Advanced Manufacturing Technology , vol. 68 , pp. 2419 – 2430 , 2013 .
   Web of Science ®Google Scholar
• G. Satoh , Y. L. Yao , and C. Qiu , Strength and Microstructure of Laser Fusion-Welded Ti-SS Dissimilar Material Pair , International Journal of Advanced Manufacturing Technology , vol. 66 , pp. 469 – 479 , 2013 .
   Web of Science ®Google Scholar
• J. Ma , F. Kong , W. Liu , B. Carlson , and R. Kovacevic , Study on the Strength and Failure Modes of Laser Welded Galvanized DP980 Steel Lap Joints , Journal of Materials Processing Technology , vol. 214 , pp. 1696 – 1709 , 2014 .
   Web of Science ®Google Scholar
• H. D. Hibbitt , B. I. Karlsson , and E. P. Sorensen , ABAQUS User Manual, Version 6.12, Simulia, Providence, RI , 2012 .
   Google Scholar
• Z. Zhou and X. Ling , Ductile Damage Analysis for Small Punch Specimens of Type 304 Stainless Steel Based on GTN Model , Journal of Testing and Evaluation , vol. 37 , pp. 1 – 7 , 2013 .
   Google Scholar
• J. M. Antunes , L. F. Menezes , and J. V. Fernandes , Three-dimensional Numerical Simulation of Vickers Indentation Tests , International Journal of Solids and Structures , vol. 43 , pp. 784 – 806 , 2005 .
   Web of Science ®Google Scholar
• A. L. Gurson , Continuum Theory of Ductile Rupture by Void Growth: Part I – Yield Criteria and Flow Rules for Porous Ductile Media , Journal of Engineering Materials and Technology , vol. 99 , pp. 2 – 15 , 1977 .
   Web of Science ®Google Scholar
• V. Tvergaard , Influence of Voids on Shear Band Instabilities under Plane Strain Conditions , International Journal of Fracture , vol. 17 , pp. 389 – 407 , 1981 .
   Web of Science ®Google Scholar
• K. Nahshon and J. W. Hutchinson , Modification of the Gurson Model for Shear Failure , European Journal of Mechanics A/Solids , vol. 27 , pp. 1 – 17 , 2008 .
   Web of Science ®Google Scholar
• K. L. Nielsen and V. Tvergaard , Ductile Shear Failure or Plug Failure of Spot Welds Modelled by Modified Gurson Model , Engineering Fracture Mechanics , vol. 77 , pp. 1031 – 1047 , 2010 .
   Web of Science ®Google Scholar
• A. F. H. Kaplan , M. Mizutani , S. Katayama , and A. Matsunawa , Unbounded Keyhole Collapse and Bubble Formation During Pulsed Laser Interaction with Liquid Zinc , Journal of Applied Physics D , vol. 35 , pp. 1218 – 1228 , 2002 .
   Web of Science ®Google Scholar
• Color versions of one or more of the figures in the article can be found online at www.tandfonline.com/uths.
   Google Scholar