Bimaterial problems with an interfacial cavity for some boundary conditions subjected to uniform heat flux normal to the interface

References

• G. C. Sih, “On the singular character of thermal stresses near a crack tip,” J. Appl. Mech., vol. 29, no. 3, pp. 587–589, 1962. DOI: 10.1115/1.3640612.
   Google Scholar
• Y. Kuo, “Interface crack between two dissimilar half space subjected to a uniform heat flow at infinity-open crack,” J. Appl. Mech., vol. 57, no. 2, pp. 359–369, 1990. DOI: 10.1115/1.2891997.
   Web of Science ®Google Scholar
• K. Y. Lee, and C. W. Shul, “Determination of thermal stress intensity factors for an interface crack under vertical uniform heat flow,” Eng. Fract. Mech., vol. 40, no. 6, pp. 1067–1074, 1991.
   Web of Science ®Google Scholar
• E. J. Brown, and F. Erdogan, “Thermal stresses in bonded materials containing cuts on the interface. Int,” J. Eng. Sci., vol. 6, no. 9, pp. 517–529, 1968. DOI: 10.1016/0020-7225(68)90003-7.
   Web of Science ®Google Scholar
• K. Kokini, and R. R. Reynolds, “Transient thermos-elastic fracture of interface cracks,” J. Therm. Stresses, vol. 15, no. 3, pp. 355–377, 1992. DOI: 10.1080/01495739208946144.
   Web of Science ®Google Scholar
• N. Hasebe, S. Kato, A. Ueda, and T. Nakamura, “Stress analysis of bimaterial strip with debondings under tension,” JSME I. J. Ser. A: Mech. Mater. Eng., vol. 39, pp. 157–165, 1996. DOI: 10.1299/jsmea1993.39.2_157.
   Web of Science ®Google Scholar
• N. Hasebe, S. Kato, and T. Nakamura, “Bimaterial problem of strip with debondings under tension and bending,” Fract. Mech. ASTM STP1220, vol. 25, pp. 206–221, 1995.
   Google Scholar
• N. Hasebe, and S. Kato, “Solution of problem of two dissimilar materials bonded at one interface subjected to temperature,” Arch. Appl. Mech., vol. 84, no. 6, pp. 913–931, 2014. DOI: 10.1007/s00419-014-0840-3.
   Web of Science ®Google Scholar
• N. Hasebe, and S. Kato, “Solution of a bonded bimaterial problem of two interfaces subjected to different temperatures,” Arch. Appl. Mech., vol. 86, no. 3, pp. 445–464, 2016. DOI: 10.1007/s00419-015-1040-5.
   Web of Science ®Google Scholar
• N. Hasebe, and S. Kato, “Debonding fracture of bonded bimaterial semi-strips subjected to concentrated forces and couples,” ZAMM Z. Angew. Math. Mech., vol. 95, no. 12, pp. 1477–1489, 2015. Supplementary material DOI zamm. 201400179 Appendix DOI: 10.1002/zamm.201400179.
   Web of Science ®Google Scholar
• N. Hasebe, M. Okumura, and T. Nakamura, “Bonded bi-material half-planes with semi-elliptical notch under tension along the interface,” J. Appl. Mech., vol. 59, no. 1, pp. 77–83, 1992.DOI: 10.1115/1.2899467.
   Web of Science ®Google Scholar
• M. Okumura, N. Hasebe, and T. Nakamura, “Bimaterial plane with elliptic hole under uniform tension normal to the interface,” Int. J. Fract., vol. 71, pp. 293–310, 1995. DOI: 10.1007/BF00037811.
   Web of Science ®Google Scholar
• V. Boniface, and N. Hasebe, “Solution of the displacement boundary value problem of an interface between two dissimilar half planes and a rigid elliptic inclusion at the interface,” J. Appl. Mech., vol. 65, no. 4, pp. 880–888, 1998. DOI: 10.1115/1.2791927.
   Web of Science ®Google Scholar
• N. Hasebe, and M. Nakashima, “Bimaterial infinite plane with a cavity on the interface subjected to different temperatures,” Arch. Appl. Mech., vol. 87, no. 2, pp. 245–260, 2017. DOI: 10.1007/s00419-016-1190-0.
   Web of Science ®Google Scholar
• P. B. N. Prasad, N. Hasebe, X. F. Wang, and Y. Shirai, “Green’s function for a bi-material problem with interfacial elliptical rigid inclusion and applications to crack and thin rigid line problems,” Int. J. Solids Struct., vol. 42, pp. 1513–1535, 2005. DOI: 10.1016/j.ijsolstr.2004.07.014.
   Web of Science ®Google Scholar
• P. B. N. Prasad, N. Hasebe, X. F. Wang, and Y. Shirai, “Green’s function of a bi-material problem with a cavity on the interface. Part1: Theory,” J. Appl. Mech., vol. 72, no. 3, pp. 389–393, 2005. DOI: 10.1115/1.1876432.
   Web of Science ®Google Scholar
• P. B. N. Prasad, N. Hasebe, and X. F. Wang, “Interaction between interfacial cavity/crack and internal crack. Part2: simulation,” J. Appl. Mech., vol. 72, no. 3, pp. 394–399, 2005. DOI: 10.1115/1.1876433.
   Web of Science ®Google Scholar
• P. B. N. Prasad, N. Hasebe, and X. F. Wang, “Interaction of internal crack with interfacial rigid inclusion, computational mechanics,” WCCM Injunction with APCOM’04, vol. 9. Beijin, China: Tsinghua University Press & Springer-Verlag, 2004, pp. 5–10.
   Google Scholar
• N. Hasebe, M. Okumura, and T. Nakamura, “Partially bonded bimaterial plane under tension,” J. Eng Mech. ASCE, vol. 116, no. 9, pp. 2017–2034, 1990. DOI: 10.1061/(ASCE)0733-9399(1990)116:9(2017).
   Web of Science ®Google Scholar
• N. Hasebe, M. Okumura, and T. Nakamura, “Solution of bonded dissimilar planes under couples,” J. Eng. Mech. ASCE, vol. 116, no. 12, pp. 2722–2737, 1990. DOI: 10.1061/(ASCE)0733-9399(1990)116:12(2722).
   Web of Science ®Google Scholar
• N. Hasebe, M. Okumura, and T. Nakamura, “A crack and debonding at the edge of bonded bi-material half planes under couples,” J. Soc. Mater. Sci. Japan, vol. 39, no. 445, pp. 1405–1410, 1990. (in Japanese). DOI: 10.2472/jsms.39.1405.
   Google Scholar
• M. Okumura, N. Hasebe, and T. Nakamura, “Conditions of a crack initiation or a debonding extension at a debonded tip of the partially bonded bimaterial half planes,” Proc. JSCE Stru. Eng. Earthquake Eng., vol. 428/I-15, no. 4, pp. 77–86, 1991. (in Japanese). DOI: 10.2208/jscej.1991.428_77.
   Google Scholar
• M. Okumura, N. Hasebe, and T. Nakamura, “Stress analysis of conditions for an initial cracking and a debonding development bonded bimaterial half-planes subject to forces, couples and uniform traction. Proc. 35th Japan Congress on Materials Research, Society of Materials Science Japan, Japan, 1992, pp .205–212.
   Google Scholar
• M. Okumura, N. Hasebe, and T. Nakamura, “Cracking and debonding at the tip of dissimilar half-planes under coupling and external forces,” J. Soc. Mater. Sci. Japan, vol. 43, no. 495, pp. 1564–1570, 1994. (in Japanese). DOI: 10.2472/jsms.43.1564.
   Google Scholar
• N. Hasebe, X. F. Wang, and M. Okumura, “Conditions for cracking and debonded development at partially bonded bimaterial half planes,” Mech. Compos. Mater., vol. 40, no. 4, pp. 287–298, 2004. DOI: 10.1023/B:MOCM.0000039746.37812.77.
   Web of Science ®Google Scholar
• N. Hasebe, and M. A. M. Salama, “Thermal stress analysis of thin plate bending of partially bonded dissimilar strips due to non-uniform change of temperature,” Proc Fourth Inter Conf Residual Stresses, vol. 6. Baltimore, MD: Society for Experimental Mechanics, Inc., pp. 992–1001, 1994.
   Google Scholar
• N. Hasebe, and M. A. M. Salama, “Thin plate bending problem of partially bonded bi-material strips,” Archi. Appl. Mech., vol. 64, pp. 423–434, 1994.
   Web of Science ®Google Scholar
• N. Hasebe, and M. A. M. Salama, “Thin plate bending problem of dissimilar strips with two bond lines,” Arch. Appl. Mech., vol. 66, no. 1–2, pp. 20–33, 1995. DOI: 10.1007/s004190050044.
   Web of Science ®Google Scholar
• M. A. M. Salama, and N. Hasebe, “Thin plate bending of dissimilar half-planes with interface debonding emanating from an elliptical hole,” Int. J. Fract., vol. 74, no. 3, pp. 199–218, 1996. DOI: 10.1007/BF00033828.
   Web of Science ®Google Scholar
• M. A. M. Salama, and N. Hasebe, “Stress concentration factors at an elliptical hole on the interface between bonded dissimilar half planes under bending moment,” J. Appl. Mech., vol. 63, no. 1, pp. 7–14, 1996. DOI: 10.1115/1.2787213.
   Web of Science ®Google Scholar
• Murakami, Y. (Chief Ed.). Stress Intensity Factors Handbook, vol. 1. Oxford: Pergamon Press, 1987.
   Google Scholar
• Murakami, Y. (Chief Ed.). Stress Intensity Factors Handbook, vol. 3. Oxford: The Society of Materials Science, Japan & Pergamon Press, 1992.
   Google Scholar
• Murakami, Y. (Chief Ed.), Stress Intensity Factors Handbook, vol. 5. Oxford: The Society of Materials Science, Japan & Elsevier Science Ltd., 2001.
   Google Scholar
• J. Dundurs, “Effect of elastic constants on stress in composite under plane deformation,” J. Comp. Mater., vol. 1, no. 3, pp. 310–322, 1967. DOI: 10.1177/002199836700100306.
   Google Scholar
• N. Hasebe, S. Tsutsui, and T. Nakamura, “Debondings at a semi-elliptic rigid inclusion on the rim of a half plane,” J. Appl. Mech., vol. 55, no. 3, pp. 574–579, 1988. DOI: 10.1115/1.3125832.
   Web of Science ®Google Scholar
• N. Hasebe, and X. F. Wang, “Complex variable method for thermal stress problem,” J. Therm. Stresses, vol. 28, no. 6–7, pp. 595–648, 2005. DOI: 10.1080/01495730590932706.
   Web of Science ®Google Scholar
• X. F. Wang, and N. Hasebe, “Formulation of the rational mapping function,” Hasebe, N. res. gate Dataset, 2014.
   Google Scholar
• N. Hasebe, and L. M. Keer, “Anti-plane shear stress problem of two bonded dissimilar half spaces with an elliptical hole or rigid inclusion on the interface,” Acta Mech., vol. 203, no. 1–2, pp. 97–111, 2009. DOI: 10.1007/s00707-008-0003-0.
   Web of Science ®Google Scholar
• N. Hasebe, T. Sugimoto, and T. Nakamura, “Longitudinal shear problem for an elastic body with two fixed edges,” J. Appl. Mech., vol. 53, no. 4, pp. 814–818, 1986. DOI: 10.1115/1.3171863.
   Web of Science ®Google Scholar
• N. I. Muskhelishvili, Some Basic Problems of Mathematical Theory of Elasticity, 4th ed. The Netherlands: Noordfoff, 1963.
   Google Scholar
• N. Hasebe, K. Tamai, and T. Nakamura, “Analysis of a kinked crack under uniform heat flow,” J. Eng. Mech. ASCE, vol. 112, no. 1, pp. 31–42, 1986. DOI: 10.1061/(ASCE)0733-9399(1986)112:1(31).
   Web of Science ®Google Scholar
• J. R. Rice, and G. C. Sih, “Plane problems of crack in dissimilar media,” J. Appl. Mech., vol. 32, no. 2, pp. 418–423, 1965. DOI: 10.1115/1.3625816.
   Google Scholar
• J. Dundurs, “Discussion about “Edge-bonded dissimilar orthogonal elastic wedges under normal and shear loadings-by D. B. Bogy,” J. Appl. Mech., vol. 36, no. 3, pp. 650–652, 1969. DOI: 10.1115/1.3564739.
   Google Scholar
• R. L. Salganic, “The brittle fracture of cemented body,” PMM J. Appl. Math. Mech., vol. 27, no. 5, pp. 1468–1478, 1963. DOI: 10.1016/0021-8928(63)90086-8.
   Google Scholar
• N. Hasebe, and J. Iida, “A crack originating from a triangular notch on a rim of a semi-infinite plate,” Eng. Fract. Mech., vol. 10, no. 4, pp. 773–782, 1978.
   Web of Science ®Google Scholar
• N. Hasebe, S. Tsutsui, and T. Nakamura, “A mixed boundary value problem for debonding of a semi-elliptic rigid inclusion,” Arch. Appl. Mech., vol. 62, pp. 306–315, 1992.
   Web of Science ®Google Scholar
• S. Moriguchi, K. Utagawa, and S. Hitotsumatsu, Mathematical Formulas. Tokyo: Iwanami Shoten, 1969, (in Japanese).
   Google Scholar