An explicit analytical solution for temperature rise in a half-space induced by ellipsoidal inclusions and its application for problems related to friction heating

References

• J. D. Eshelby, “The determination of the elastic field of an ellipsoidal inclusion, and related problems,” Proc. Roy. Soc. A-Math. Phys., vol. 241, pp. 376–396, 1957.
   Web of Science ®Google Scholar
• J. D. Eshelby, “The elastic field outside an ellipsoidal inclusion,” Proc. Roy. Soc. A-Math. Phys., vol. 252, pp. 561–569, 1959.
   Web of Science ®Google Scholar
• T. Mura, Micromechanics of Defects in Solids. Dordrecht, the Netherlands: Springer Science & Business Media, 2013.
   Google Scholar
• H. Amstutz and M. Vormwald, “Analysis of an elastic elliptical inclusion in an infinite elastic plate under uniform remote tension based on the solution of the corresponding cavity problem,” J. Strain Anal. Eng., vol. 52, no. 8, pp. 515–527, 2017. DOI: 10.1177/0309324717732212.
   Web of Science ®Google Scholar
• M. R. Delfani and M. L. Shahandashti, “Elastic field of a spherical inclusion with non-uniform eigenfields in second strain gradient elasticity,” Proc. Roy. Soc. A-Math. Phys., vol. 473, no. 2205, pp. 20170254, 2017. DOI: 10.1098/rspa.2017.0254.
   Web of Science ®Google Scholar
• P. Jana, “Elastic-plastic behavior of an ellipsoidal inclusion embedded in an elastic matrix,” J. Procedia Eng., vol. 173, pp. 1116–1121, 2017. DOI: 10.1016/j.proeng.2016.12.075.
   Google Scholar
• Y. G. Lee, W. N. Zou, and E. Pan, “Eshelby’s problem of polygonal inclusions with polynomial eigenstrains in an anisotropic magneto-electro-elastic full plane,” Proc. Math. Phys. Eng. Sci., vol. 471, no. 2179, pp. 20140827, 2015. DOI: 10.1098/rspa.2014.0827.
   PubMed Web of Science ®Google Scholar
• Y. P. Chiu, “On the stress field and surface deformation in a half space with a cuboidal zone in which initial strains are uniform,” J. Appl. Mech.-T ASME, vol. 45, no. 2, pp. 302–306, 1978. DOI: 10.1115/1.3424292.
   Web of Science ®Google Scholar
• W. Yang et al., “Parametric study on stressed volume and its application to the quantification of rolling contact fatigue performance of heterogeneous material,” Tribol. Int., vol. 107, pp. 221–232, 2017. DOI: 10.1016/j.triboint.2016.11.034.
   Web of Science ®Google Scholar
• H. Zhang, W. Wang, S. Zhang, and Z. Zhao, “Semi-analytical solution of three-dimensional steady state thermoelastic contact problem of multilayered material under friction heating,” Int. J. Therm. Sci., vol. 127, pp. 384–399, 2018. DOI: 10.1016/j.ijthermalsci.2018.02.006.
   Web of Science ®Google Scholar
• M. Zhang et al., “Contact elasto-plasticity of inhomogeneous materials and a numerical method for estimating matrix yield strength of composites,” Tribol. Int., vol. 127, pp. 84–95, 2018. DOI: 10.1016/j.triboint.2018.06.001.
   Web of Science ®Google Scholar
• M. Zhang et al., “Elasto-plastic contact of materials containing double-layered inhomogeneities,” Int. J. Solid Struct., vol. 126, pp. 208–224, 2017. DOI: 10.1016/j.ijsolstr.2017.08.006.
   Web of Science ®Google Scholar
• K. Zhou et al., “Multiple 3D inhomogeneous inclusions in a half space under contact loading,” Mech. Mater., vol. 43, no. 8, pp. 444–457, 2011. DOI: 10.1016/j.mechmat.2011.02.001.
   Web of Science ®Google Scholar
• Q. Zhou et al., “An efficient approximate numerical method for modeling contact of materials with distributed inhomogeneities,” Int. J. Solid Struct., vol. 51, no. 19–20, pp. 3410–3421, 2014. DOI: 10.1016/j.ijsolstr.2014.06.005.
   Web of Science ®Google Scholar
• Q. Zhou et al., “Numerical implementation of the equivalent inclusion method for 2D arbitrarily shaped inhomogeneities,” J. Elast., vol. 118, no. 1, pp. 39–61, 2015. DOI: 10.1007/s10659-014-9477-2.
   Web of Science ®Google Scholar
• Q. Zhou et al., “Numerical EIM with 3D FFT for the contact with a smooth or rough surface involving complicated and distributed inhomogeneities,” Tribol. Int., vol. 93, pp. 91–103, 2016. DOI: 10.1016/j.triboint.2015.09.001.
   Web of Science ®Google Scholar
• Q. Zhou et al., “Numerical analysis of the influence of distributed inhomogeneities on tangential fretting,” Proc. Inst. Mech. Eng. J-J Eng., vol. 231, pp. 1350–1370, 2017. DOI: 10.1177/1350650117693420.
   Web of Science ®Google Scholar
• Q. Zhou et al., “Numerical modeling of distributed inhomogeneities and their effect on rolling-contact fatigue life,” J. Tribol., vol. 137, 011402, 2015. DOI: 10.1115/1.4028406.
   Web of Science ®Google Scholar
• Q. Zhou et al., “Modeling rolling contact fatigue lives of composite materials based on the dual beam FIB/SEM technique,” Int. J. Fatigue, vol. 83, pp. 201–208, 2016. DOI: 10.1016/j.ijfatigue.2015.10.014.
   Web of Science ®Google Scholar
• Z. Wang et al., “An efficient numerical method with a parallel computational strategy for solving arbitrarily shaped inclusions in elastoplastic contact problems,” J. Tribol., vol. 135, 031401, 2013. DOI: 10.1115/1.4023948.
   Web of Science ®Google Scholar
• S. Liu, X. Jin, Z. Wang, L. M. Keer, and Q. Wang, “Analytical solution for elastic fields caused by eigenstrains in a half-space and numerical implementation based on FFT,” Int. J. Plast., vol. 35, pp. 135–154, 2012. DOI: 10.1016/j.ijplas.2012.03.002.
   Web of Science ®Google Scholar
• S. Liu and Q. Wang, “Elastic fields due to eigenstrains in a half-space,” J. Appl. Mech., vol. 72, no. 6, pp. 871–878, 2005. DOI: 10.1115/1.2047598.
   Web of Science ®Google Scholar
• D. Lyu et al., “Explicit analytical solutions for the complete elastic field produced by an ellipsoidal thermal inclusion in a semi-infinite space,” J. Appl. Mech., vol. 85, 051005, 2018. DOI: 10.1115/1.4039373.
   Web of Science ®Google Scholar
• R. D. Mindlin and D. H. Cheng, “Thermoelastic stress in the semi‐infinite solid,” J. Appl. Phys., vol. 21, no. 9, pp. 931–933, 1950. DOI: 10.1063/1.1699786.
   Web of Science ®Google Scholar
• K. Seo and T. Mura, “The elastic field in a half space due to ellipsoidal inclusions with uniform dilatational eigenstrains,” J. Appl. Mech., vol. 46, no. 3, pp. 568–572, 1979. DOI: 10.1115/1.3424607.
   Web of Science ®Google Scholar
• R. Mindlin, “Force at a point in the interior of a semi-infinite solid,” 1st Midwestern Conference on Solid Mechanics, Department of Civil Engineering, University of British Columbia, Vancouver, Canada, pp. 56–59, 1953.
   Google Scholar
• T. K. Lai, Thermal Stress Due to Distribution of Uniform Flow by an Ellipsoidal Inclusion. Evanston, IL, USA: Northwestern University, 1977.
   Google Scholar
• H. Hatta and M. Taya, “Equivalent inclusion method for steady state heat conduction in composites,” Int. J. Eng. Sci., vol. 24, no. 7, pp. 1159–1172, 1986. DOI: 10.1016/0020-7225(86)90011-X.
   Web of Science ®Google Scholar
• J. H. Huang, “On the thermoelastic field in a composite material with inhomogeneities,” J. Thermoplast. Compos., vol. 9, no. 3, pp. 246–258, 1996. DOI: 10.1177/089270579600900303.
   Web of Science ®Google Scholar
• X. Shi, L. Wang, Q. Zhou, and Q. Wang, “A fast approximate method for heat conduction in an inhomogeneous half-space subjected to frictional heating,” J. Tribol., vol. 140, 041101, 2018. DOI: 10.1115/1.4038953.
   Web of Science ®Google Scholar
• W. Yang et al., “A thermoelastic contact model between a sliding sphere and a stationary half space distributed with spherical inhomogeneities,” Tribol. Int., vol. 131, pp. 33–44, 2019. DOI: 10.1016/j.triboint.2018.10.023.
   Web of Science ®Google Scholar
• W. Yang et al., “Semi-analytical solution for steady state heat conduction in a heterogeneous half space embedded with cuboidal inhomogeneity,” Int. J. Therm. Sci., vol. 139, pp. 326–338, 2019. DOI: 10.1016/j.ijthermalsci.2019.02.019.
   Web of Science ®Google Scholar
• Y. Liu, W. Wang, H. Zhang, and Z. Zhao, “Solution of temperature distribution under frictional heating with consideration of material inhomogeneity,” Tribol. Int., vol. 126, pp. 80–96, 2018. DOI: 10.1016/j.triboint.2018.04.027.
   Web of Science ®Google Scholar
• N. M. Ferrers, “On the potentials of ellipsoids, ellipsoidal shells, elliptic laminae and elliptic rings of variable densities,” Q J Pure Appl. Math., vol. 14, pp. 1–22, 1877.
   Google Scholar
• F. W. Dyson, “The potentials of ellipsoids of variable densities,” Q J Pure Appl. Math., vol. 25, pp. 259–288, 1950.
   Google Scholar
• X. Jin et al., “Explicit analytical solutions for a complete set of the Eshelby tensors of an ellipsoidal inclusion,” ASME J. Appl. Mech., vol. 83, 121010, 2016. DOI: 10.1115/1.4034705.
   Web of Science ®Google Scholar
• J. Ju and L. Sun, “A novel formulation for the exterior-point Eshelby’s tensor of an ellipsoidal inclusion,” ASME J. Appl. Mech., vol. 66, no. 2, pp. 570–574, 1999. DOI: 10.1115/1.2791090.
   Web of Science ®Google Scholar
• A. A. Shabana, Dynamics of Multibody Systems. Cambridge, UK: Cambridge University Press, 2013.
   Google Scholar
• S. Liu and Q. Wang, “Transient thermoelastic stress fields in a half-space,” J. Tribol., vol. 125, no. 1, pp. 33–43, 2003. DOI: 10.1115/1.1501087.
   Web of Science ®Google Scholar