Annular crack in a thermoelastic half-space

References

• I. N. Sneddon, “The distribution of stress in the neighbourhood of a crack in an elastic solid,” Proc. R. Soc. Lond. A Math. Phys. Eng. Sci., vol. 187, no. 1009, pp. 229–260, 1946.
   Google Scholar
• N. N. Lebedev and I. S. Ufliand, “Axisymmetric contact problem for an elastic layer,” J. Appl. Math. Mech., vol. 22, no. 3, pp. 442–450, 1958. DOI: 10.1016/0021-8928(58)90059-5.
   Google Scholar
• M. Sakamoto, “An elastic layer with a penny-shaped crack subjected to internal pressure,” JSME Int. J. Ser. A, vol. 46, no. 1, pp. 10–14, 2003. DOI: 10.1299/jsmea.46.10.
   Web of Science ®Google Scholar
• M. Sakamoto and K. Kobayashi, “The axisymmetric contact problem of an elastic layer subjected to a tensile stress applied over a circular region,” Theor. Appl. Mech. Jpn., vol. 53, pp. 27–36, 2004.
   Google Scholar
• M. Sakamoto and K. Kobayashi, “Axisymmetric indentation of an elastic layer on a rigid foundation with a circular hole,” WIT Trans. Eng. Sci., vol. 49, pp. 1–8, 2005.
   Google Scholar
• M. Sakamoto and K. Kobayashi, “The axisymmetric contact problem of an elastic layer indented by an infinite rigid punch with a circular hole,” Theor. Appl. Mech. Jpn., vol. 55, pp. 61–71, 2006.
   Google Scholar
• I. N. Kuz'min and I. S. Ufliand, “The contact problem of an elastic layer compressed by two punches,” J. Appl. Math. Mech., vol. 31, no. 4, pp. 725–730, 1967. DOI: 10.1016/0021-8928(67)90012-3.
   Google Scholar
• V. N. Zakorko, “Axisymmetric strain of an elastic layer with a circular line of separation of the boundary conditions on both faces,” J. Appl. Math. Mech., vol. 38, no. 1, pp. 113–121, 1974. DOI: 10.1016/0021-8928(74)90096-3.
   Google Scholar
• R. S. Dhaliwal and B. M. Singh, “Axisymmetric contact problem for an elastic layer on a rigid foundation with a cylindrical hole,” Int. J. Eng. Sci., vol. 15, no. 7, pp. 421–428, 1977. DOI: 10.1016/0020-7225(77)90033-7.
   Web of Science ®Google Scholar
• V. N. Zakorko, “Contact problem for a layer with two stamps,” J. Appl. Math. Mech., vol. 42, no. 6, pp. 1169–1175, 1978. DOI: 10.1016/0021-8928(78)90066-7.
   Google Scholar
• T. Hara, T. Akiyama, T. Shibuya, and T. Koizumi, “An axisymmetric contact problem of an elastic layer on a rigid base with a cylindrical hole,” JSME Int. J. Ser. I. Solid Mech. Strength Mater., vol. 33, no. 4, pp. 461–467, 1990. DOI: 10.1299/jsmea1988.33.4_461.
   Web of Science ®Google Scholar
• A. P. S. Selvadurai, “Mechanics of a rigid circular disc bonded to a cracked elastic half-space,” Int. J. Solids Struct., vol. 39, no. 24, pp. 6035–6053, 2002. DOI: 10.1016/S0020-7683(02)00473-0.
   Web of Science ®Google Scholar
• K. N. Srivastava and K. Singh, “The effect of penny-shaped crack on the distribution of stress in a semi-infinite solid,” Int. J. Eng. Sci., vol. 7, no. 5, pp. 469–490, 1969. DOI: 10.1016/0020-7225(69)90034-2.
   Web of Science ®Google Scholar
• Y. Fialko, Y. Khazan, and M. Simons, “Deformation due to a pressurized horizontal circular crack in an elastic half-space, with applications to volcano geodesy,” Geophys. J. Int., vol. 146, no. 1, pp. 181–190, 2001. DOI: 10.1046/j.1365-246X.2001.00452.x.
   Web of Science ®Google Scholar
• X. Q. Feng and M. Xu, “Solutions of stress intensity factors of subsurface cracks,” KEM, vol. 312, pp. 83–88, 2006. DOI: 10.4028/www.scientific.net/KEM.312.83.
   Google Scholar
• A. P. S. Selvadurai and B. M. Singh, “Axisymmetric problems for an externally cracked elastic solid. I. Effect of a penny-shaped crack,” Int. J. Eng. Sci., vol. 25, no. 8, pp. 1049–1057, 1987. DOI: 10.1016/0020-7225(87)90096-6.
   Web of Science ®Google Scholar
• A. P. S. Selvadurai and B. M. Singh, “Axisymmetric problems for an externally cracked elastic solid—ii. Effect of a pennyshaped inclusion,” Int. J. Eng. Sci., vol. 25, no. 11–12, pp. 1477–1490, 1987. DOI: 10.1016/0020-7225(87)90025-5.
   Web of Science ®Google Scholar
• M. Sakamoto, T. Hara, T. Shibuya, and T. Koizumi, “Indentation of a penny-shaped crack by a disc-shaped rigid inclusion in an elastic layer,” JSME Int. J. Ser. I Solid Mech. Strength Mater., vol. 33, no. 4, pp. 425–430, 1990. DOI: 10.1299/jsmea1988.33.4_425.
   Web of Science ®Google Scholar
• B. I. Smetanin, “Problem of extension of an elastic space containing a plane annular slit,” J. Appl. Math. Mech., vol. 32, no. 3, pp. 461–466, 1968. DOI: 10.1016/0021-8928(68)90065-8.
   Google Scholar
• V. I. Mossakovskii and M. T. Rybka, “Generalization of the Griffith-Sneddon criterion for the case of a nonhomogeneous body,” J. Appl. Math. Mech., vol. 28, no. 6, pp. 1277–1286, 1964. DOI: 10.1016/0021-8928(64)90039-5.
   Google Scholar
• L. W. Moss and A. S. Kobayashi, “Approximate analysis of axisymmetric problems in fracture mechanics with application to a flat toroidal crack,” Int. J. Fract., vol. 7, no. 1, pp. 89–99, 1971.
   Web of Science ®Google Scholar
• T. Shibuya, I. Nakahara, and T. Koizumi, “The axisymmetric distribution of stresses in an infinite elastic solid containing a flat annular crack under internal pressure,” Z. Angew. Math. Mech., vol. 55, no. 7–8, pp. 395–402, 1975. DOI: 10.1002/zamm.19750550707.
   Web of Science ®Google Scholar
• E. N. Mastrojanni and T. B. Kermanidis, “An approximate solution of the annular crack problem,” Int. J. Numer. Methods Eng., vol. 17, no. 11, pp. 1605–1611, 1981. DOI: 10.1002/nme.1620171103.
   Web of Science ®Google Scholar
• I. Choi and R. T. Shield, “A note on a flat toroidal crack in an elastic isotropic body,” Int. J. Solids Struct., vol. 18, no. 6, pp. 479–486, 1982. DOI: 10.1016/0020-7683(82)90064-6.
   Web of Science ®Google Scholar
• A. P. S. Selvadurai and B. M. Singh, “The annular crack problem for an isotropic elastic solid,” Q. J. Mech. Appl. Math., vol. 38, no. 2, pp. 233–243, 1985. DOI: 10.1093/qjmam/38.2.233.
   Google Scholar
• D. L. Clements and W. T. Ang, “Stress intensity factors for the circular annulus crack,” Int. J. Eng. Sci., vol. 26, no. 4, pp. 325–329, 1988. DOI: 10.1016/0020-7225(88)90112-7.
   Web of Science ®Google Scholar
• T. Koizuml, T. Shibuya, I. Nakahara, and S. Tanaka, “A crack problem on a slab with an annular crack subjected to pressure,” Bull. JSME, vol. 20, no. 139, pp. 17–23, 1977. DOI: 10.1299/jsme1958.20.17.
   Google Scholar
• B. Kebli and Z. Baka, “Annular crack in an elastic half-space,” Int. J. Eng. Sci., vol. 134, pp. 117–147, 2019. DOI: 10.1016/j.ijengsci.2018.10.007.
   Web of Science ®Google Scholar
• T. Shibuya, T. Koizumi, and I. Nakahara, “The axisymmetric stress distribution in an infinite elastic solid containing a flat annular crack under torsion,” Bull. JSME, vol. 19, no. 134, pp. 857–862, 1976. DOI: 10.1299/jsme1958.19.857.
   Google Scholar
• R. S. Dhaliwal, “Mixed boundary value problem of heat conduction for infinite slab,” Appl. Sci. Res., vol. 16, no. 1, pp. 228–240, 1966. DOI: 10.1007/BF00384070.
   Google Scholar
• R. S. Dhaliwal, “An axisymmetric mixed boundary value problem for a thick slab,” SIAM J. Appl. Math., vol. 15, no. 1, pp. 98–106, 1967. DOI: 10.1137/0115006.
   Web of Science ®Google Scholar
• R. C. Mehta and T. K. Bose, “Temperature distribution in a large circular plate heated by a disk heat source,” Int. J. Heat Mass Transf., vol. 26, no. 7, pp. 1093–1095, 1983. DOI: 10.1016/S0017-9310(83)80136-7.
   Web of Science ®Google Scholar
• G. M. L. Gladwell, J. R. Barber, and Z. Olesiak, “Thermal problems with radiation boundary conditions,” Q. J. Mech. Appl. Math., vol. 36, no. 3, pp. 387–401, 1983. DOI: 10.1093/qjmam/36.3.387.
   Google Scholar
• T. F. Lemczyk and M. M. Yovanovich, “Thermal constriction resistance with convective boundary conditions–1. Half-space contacts,” Int. J. Heat Mass Transf., vol. 31, no. 9, pp. 1861–1872, 1988. DOI: 10.1016/0017-9310(88)90200-1.
   Web of Science ®Google Scholar
• M. M. Yovanovich, “Thermal constriction resistance of contacts on a half-space: Integral formulation,” in Progress in Astronautics and Aeronautics: Radiative Transfer and Thermal Control, Allie M. Smith, Ed, vol. 49. New York: AIAA, 1976, pp. 397–418. DOI: 10.2514/5.9781600865237.0397.0418.
   Google Scholar
• T. F. Lemczyk and M. M. Yovanovich, “Thermal constriction resistance with convective boundary conditions–2. Layered half-space contacts,” Int. J. Heat Mass Transf., vol. 31, no. 9, pp. 1873–1883, 1988. DOI: 10.1016/0017-9310(88)90201-3.
   Web of Science ®Google Scholar
• T. V. Rao, “Effect of surface layers on the constriction resistance of an isothermal spot. Part I: Reduction to an integral equation and numerical results,” Heat Mass Transf., vol. 40, no. 6–7, pp. 439–453, 2004. DOI: 10.1007/s00231-003-0491-3.
   Web of Science ®Google Scholar
• T. V. Rao, “Effect of surface layers on the constriction resistance of an isothermal spot. Part II: Analytical results for thick layers,” Heat Mass Transf., vol. 40, no. 6–7, pp. 455–466, 2004. DOI: 10.1007/s00231-003-0491-3.
   Web of Science ®Google Scholar
• Z. Olesiak and I. N. Sneddon, “The distribution of thermal stress in an infinite elastic solid containing a penny-shaped crack,” Arch. Ration. Mech. Anal., vol. 4, no. 1, pp. 238–254, 1959. DOI: 10.1007/BF00281390.
   Google Scholar
• R. Shail, “Some thermoelastic stress distributions in an infinite solid and a thick plate containing penny-shaped cracks,” Mathematika, vol. 11, no. 2, pp. 102–118, 1964. DOI: 10.1112/S0025579300004319.
   Google Scholar
• A. E. Green, “The elastic equilibrium of isotropic plates and cylinders,” Proc. R. Soc. Lond. Ser. A. Math. Phys. Sci., vol. 195, no. 1043, pp. 533–552, 1949.
   Google Scholar
• W. Collins, “On the solution of some axisymmetric boundary value problems by means of integral equations, II: Further problems for a circular disc and a spherical cap,” Mathematika, vol. 6, no. 2, pp. 120–133, 1959. DOI: 10.1112/S0025579300002023.
   Google Scholar
• W. E. Williams, “A solution of the steady state thermoelastic equations,” J. Appl. Math. Phys. (ZAMP), vol. 12, no. 5, pp. 452–455, 1961. DOI: 10.1007/BF01600692.
   Web of Science ®Google Scholar
• K. Srivastava and R. Palaiya, “The distribution of thermal stress in a semi-infinite elastic solid containing a penny-shaped crack,” Int. J. Eng. Sci., vol. 7, no. 7, pp. 641–666, 1969. DOI: 10.1016/0020-7225(69)90045-7.
   Web of Science ®Google Scholar
• B. R. Das, “Some axially symmetric thermal stress distributions in elastic solids containing cracks–I An external crack in an infinite solid,” Int. J. Eng. Sci., vol. 9, no. 5, pp. 469–478, 1971. DOI: 10.1016/0020-7225(71)90048-6.
   Web of Science ®Google Scholar
• G. M. L. Gladwell and J. R. Barber, “Thermoelastic contact problems with radiation boundary conditions,” Q. J. Mech. Appl. Math., vol. 36, no. 3, pp. 403–417, 1983. DOI: 10.1093/qjmam/36.3.403.
   Google Scholar
• X.-F. Li and K. Y. Lee, “Effect of heat conduction of penny-shaped crack interior on thermal stress intensity factors,” Int. J. Heat Mass Transf., vol. 91, pp. 127–134, 2015. DOI: 10.1016/j.ijheatmasstransfer.2015.07.087.
   Web of Science ®Google Scholar
• X.-Y. Li, P.-D. Li, G.-Z. Kang, W.-Q. Chen, and R. Müller, “Steady-state thermo-elastic field in an infinite medium weakened by a penny-shaped crack: Complete and exact solutions,” Int. J. Solids Struct., vol. 84, pp. 167–182, 2016. DOI: 10.1016/j.ijsolstr.2016.02.001.
   Web of Science ®Google Scholar
• P.-F. Hou, Q.-H. Li, and H.-Y. Jiang, “Three-dimensional steady-state general solution for isotropic thermoelastic materials with applications II: Green’s functions for two-phase infinite body,” J. Therm. Stresses, vol. 36, no. 8, pp. 851–867, 2013. DOI: 10.1080/01495739.2013.788905.
   Web of Science ®Google Scholar
• Y. Mori, Y. Shindo, and A. Atsumi, “Thermal stresses in a slab containing an annular crack,” Int. J. Eng. Sci., vol. 18, no. 9, pp. 1161–1172, 1980. DOI: 10.1016/0020-7225(80)90119-6.
   Web of Science ®Google Scholar
• M. Kumar and Padmshri, “Thermal-stresses in a thick elastic slab containing an annular crack,” Indian J. Pure Appl. Math., vol. 25, no. 9, pp. 1001–1015, 1994.
   Web of Science ®Google Scholar
• M. Lal, “Some axially symmetric thermal stress distributions in an elastic solid containing an annular crack,” Int. J. Eng. Sci., vol. 20, no. 11, pp. 1261–1273, 1982. DOI: 10.1016/0020-7225(82)90046-5.
   Web of Science ®Google Scholar
• R. Bhowmick and B. R. Das, “Steady-state thermal stresses in an infinite elastic medium containing an annular crack,” Proc. Indian Acad. Sci. Math. Sci., vol. 107, pp. 71–87, 1997. DOI: 10.1007/BF02840475.
   Google Scholar
• J. C. Cooke, “Some further triple integral equation solutions,” Proc. Edinburgh Math. Soc., vol. 13, no. 4, pp. 303–316, 1963. DOI: 10.1017/S0013091500025608.
   Google Scholar
• I. S. Gradshteyn and I. M. Ryzhik, Table of Integrals, Series, and Products. London: Academic Press, 2007.
   Google Scholar
• M. R. Eslami et al., Theory of Elasticity and Thermal Stresses, vol. 197, 2013. Dordrecht: Springer.
   Google Scholar
• P.-D. Li, X.-Y. Li, and G.-Z. Kang, “Axisymmetric thermo-elastic field in an infinite space containing a penny-shaped crack under a pair of symmetric uniform heat fluxes and its applications,” Int. J. Mech. Sci., vol. 115–116, pp. 634–644, 2016. DOI: 10.1016/j.ijmecsci.2016.07.027.
   Web of Science ®Google Scholar
• N. Noda, R. B. Hetnarski, and Y. Tanigawa, Thermal Stresses. 2nd ed. 2003, New York: Taylor & Francis.
   Google Scholar