References
- T. A. Labutin, V. N. Lednev, A. A. Ilyin, and A. M. Popov, “Femtosecond laser-induced breakdown spectroscopy,” J. Anal. At. Spectrom., vol. 31, no. 1, pp. 90–118, 2016. DOI: 10.1039/C5JA00301F.
- D. Bäuerle, “Ultrashort-Pulse Laser Ablation,” in Laser Processing and Chemistry; Springer, 2011; pp. 279–313.
- X. Zhao and Y. C. Shin, “A two-dimensional comprehensive hydrodynamic model for femtosecond laser pulse interaction with metals,” J. Phys. D: Appl. Phys., vol. 45, no. 10, pp. 105201, 2012. DOI: 10.1088/0022-3727/45/10/105201.
- G. D. Tsibidis, E. Stratakis and K. E. Aifantis, “Thermoplastic deformation of silicon surfaces induced by ultrashort pulsed lasers in submelting conditions,” J. Appl. Phys., vol. 111, no. 5, pp. 053502, 2012. DOI: 10.1063/1.3688020.
- R. Beuton, et al., “Thermo-elasto-plastic simulations of femtosecond laser-induced multiple-cavity in fused silica,” Appl. Phys. A, vol. 124, no. 4, pp. 324, 2018. DOI: 10.1007/s00339-018-1743-x.
- B. S. Yilbas, “Short-pulse laser heating of gold-chromium layers: thermo-elasto-plastic analysis,” J. Phys. D: Appl. Phys, vol. 35, no. 11, pp. 1210–1217, 2002. DOI: 10.1088/0022-3727/35/11/318.
- M. Dirscherl, G. Esser and M. Schmidt, “Ultrashort pulse laser bending,” JLMN, vol. 1, no. 1, pp. 54–60, 2006. DOI: 10.2961/jlmn.2006.01.0011.
- X. Qi, L. Liu, C. S. Suh and R. Chona, “Elasto-viscoplastic wave thermometry for single crystalline silicon processing,” Int. J. Appl. Mech., vol. 02, no. 04, pp. 827–849, 2010. VolNo DOI: 10.1142/S1758825110000779.
- X. Mao and C. S. Suh, “Generalized thermo-elastodynamics for polycrystalline metallic thin films in response to ultrafast laser heating,” J. Thermophys. Heat Transfer, vol. 33, no. 1, pp. 106–111, 2019. DOI: 10.2514/1.t5429.
- X. Mao and C. S. Suh, “Ultrashort pulse-induced elastodynamics in polycrystalline materials. Part I: Model validation,” J. Therm. Stresses, vol. 42, no. 3, pp. 374–387, 2019. DOI: 10.1080/01495739.2018.1524729.
- E. G. Gamaly, A. V. Rode, B. Luther-Davies and V. T. Tikhonchuk, “Ablation of solids by femtosecond lasers: ablation mechanism and ablation thresholds for metals and dielectrics,” Phys. Plasmas, vol. 9, no. 3, pp. 949–957, 2002. DOI: 10.1063/1.1447555.
- Bower, A. F. Applied Mechanics of Solids. Boca Raton: CRC Press, 2009. DOI: 10.1201/9781439802489
- Y. Oh, C. S. Suh and H.-J. Sue, “On failure mechanisms in flip chip assembly—Part 1: short-time scale wave motion,” J. Electron. Packag., vol. 130, no. 2, pp. 021008, 2008. DOI: 10.1115/1.2912188.
- X. Qi and C. S. Suh, “Ultrafast laser-induced elastodynamics in single crystalline silicon part II: near-field response,” J. Therm. Stresses, vol. 32, no. 5, pp. 494–511, 2009. DOI: 10.1080/01495730802637399.
- X. Mao and C. S. Suh, “Ultrashort pulse induced elastodynamics in polycrystalline materials. Part II: thermal–mechanical response,” J. Therm. Stresses, vol. 42, no. 3, pp. 388–400, 2019. DOI: 10.1080/01495739.2018.1524730.
- Z. Branigan and C. S. Suh, “Power density – an alternative approach to quantifying fatigue failure,” JVTSD, vol. 2, no. 4, pp. 307–326, 2018. DOI: 10.5890/JVTSD.2018.12.002.
- M. Nagaraj and C. S. Suh, “On short time scale stress wave phenomena and initiation of mechanical faults in flip chip configurations,” IEEE Trans. Device Mater. Relib., vol. 5, no. 2, pp. 224–230, 2005. DOI: 10.1109/TDMR.2005.846828.
- D. J. Hwang, C. P. Grigoropoulos and T. Y. Choi, “Efficiency of silicon micromachining by femtosecond laser pulses in ambient air,” J. Appl. Phys., vol. 99, no. 8, pp. 083101, 2006. DOI: 10.1063/1.2187196.
- J. Krüger and W. Kautek, “The femtosecond pulse laser: a new tool for micromachining,” Laser Phys.-Lawrence, vol. 9, pp. 30–40, 1999.
- L. Jiang and H.-L. Tsai, “Prediction of crater shape in femtosecond laser ablation of dielectrics,” J. Phys. D: Appl. Phys., vol. 37, no. 10, pp. 1492–1496, 2004. DOI: 10.1088/0022-3727/37/10/012.