References
- S. P. Timoshenko, “On the correction for shear of the differential equation for transverse vibration of prismatic bars,” Philos. Mag. Lett, vol. 6, no. 46, pp. 744–746, 1921.
- A. S. Sayyad and Y. M. Ghugal, “Bending, buckling and free vibration of laminated composite and sandwich beams: A critical review of literature,” Compos. Struct., vol. 171, pp. 486–504, 2017. DOI: https://doi.org/10.1016/j.compstruct.2017.03.053.
- A. S. Sayyad and Y. M. Ghugal, “Modelling and analysis of functionally graded sandwich beams: A review,” Mech. Adv. Mater. Struct, vol. 26, no. 21, pp. 1776–1795, 2019. DOI: https://doi.org/10.1080/15376494.2018.1447178.
- B. V. Sankar and J. T. Tzeng, “Thermal stresses in functionally graded beams,” AIAA J, vol. 40, no. 6, pp. 1228–1232, 2002. DOI: https://doi.org/10.2514/2.1775.
- S. Kapuria, P. C. Dumir and A. Ahmed, “An efficient higher order zigzag theory for composite and sandwich beams subjected to thermal loading,” Int. J. Solids Struct, vol. 40, no. 24, pp. 6613–6631, 2003. DOI: https://doi.org/10.1016/j.ijsolstr.2003.08.014.
- P. Vidal and O. Polit, “A thermomechanical finite element for the analysis of rectangular laminated beams,” Finite Elem. Anal. Des, vol. 42, no. 10, pp. 868–883, 2006. DOI: https://doi.org/10.1016/j.finel.2006.01.005.
- P. Vidal and O. Polit, “A refined sine-based finite element with transverse normal deformation for the analysis of laminated beams under thermomechanical loads,” JOMMS, vol. 4, no. 6, pp. 1127–1155, 2009. DOI: https://doi.org/10.2140/jomms.2009.4.1127.
- M. Lezgy-Nazargah, “Fully coupled thermo-mechanical analysis of bi-directional FGM beams using NURBS iso-geometric finite element approach,” Aerosp. Sci. Technol., vol. 45, pp. 154–164, 2015. DOI: https://doi.org/10.1016/j.ast.2015.05.006.
- A. S. D, “Nonlinear thermal displacements of laminated composite beams,” Coupled Syst. Mech., vol. 7, no. 6, pp. 691–705, 2018.
- N. Pradhan and S. K. Sarangi, “Analysis of functionally graded beams subjected to Thermomechanical loading using finite element method,” Mater. Today: Proc., vol. 5, pp. 19490–19496, 2018. DOI: https://doi.org/10.1016/j.matpr.2018.06.310.
- Z. Zhang, D. Zhou, H. Fang, J. Zhang and X. Li, “Analysis of laminated beams with temperature-dependent material properties subjected to thermal and mechanical loads,” Compos. Struct., vol. 227, pp. 111304, 2019. DOI: https://doi.org/10.1016/j.compstruct.2019.111304.
- H. M. Zhou, X. M. Zhang and Z. Y. Wang, “Thermal analysis of 2D FGM beam subjected to thermal loading using least-square method,” Math. Probl. Eng., vol. 10, pp. 1–11, 2019.
- S. M. Ghumare and A. S. Sayyad, “Analytical solutions for the hygro-thermo-mechanical bending of FG beams using a new fifth order shear and normal deformation theory,” J. Appl. Comput. Mech., vol. 14, no. 1, pp. 1893–1911, 2020.
- C. Boga and O. Selek, “Stress analysis of functionally graded beams due to thermal loading,” Int. J. Eng. Sci. Technol., vol. 15, no. 1, pp. 54–65, 2020.
- S. K. Kulkarni and Y. M. Ghugal, “Flexural Analysis of Composite Laminated Beams Subjected to Thermo-Mechanical Loads,” JSSCM., vol. 12, no. 1, pp. 52–79, 2018. DOI: https://doi.org/10.24874/jsscm.2018.12.01.05.
- S. K. Kulkarni and Y. M. Ghugal, “Closed-form solutions for laminated composite and sandwich beams loaded by temperature field,” Compos. Mech. Comput. Appl., vol. 11, no. 3, pp. 239–265, 2020. DOI: https://doi.org/10.1615/CompMechComputApplIntJ.2020032576.
- M. Hajianmaleki and M. Qatu, “Static and vibration analyses of thick, generally laminated deep curved beams with different boundary conditions,” Compos. B. Eng., vol. 43, no. 4, pp. 1767–1775, 2012. DOI: https://doi.org/10.1016/j.compositesb.2012.01.019.
- M. Wang and Y. Liu, “Elastic solution of orthotropic functionally graded curved beams,” Eur. J. Mech. A Solids, vol. 37, pp. 8–13, 2013. DOI: https://doi.org/10.1016/j.euromechsol.2012.04.005.
- M. Arefi, “Elastic solution of a curved beam made of functionally graded materials with different cross sections,” Steel Compos. Struct., vol. 18, no. 3, pp. 659–672, 2015. DOI: https://doi.org/10.12989/scs.2015.18.3.659.
- A. Luu, N. Kimm N and J. Lee, “Bending and buckling of general laminated curved beams using NURBS-based isogeometric analysis,” Eur. J. Mech. A Solids., vol. 54, pp. 218–231, 2015.
- J. Guo, D. Shi, Q. Wang, F. Pang and Q. Liang, “A domain decomposition approach for static and dynamic analysis of composite laminated curved beam with general elastic restrains,” Mech. Adv. Mater. Struct., vol. 26, no. 16, pp. 1390–1402, 2019. DOI: https://doi.org/10.1080/15376494.2018.1432810.
- A. S. Sayyad and Y. M. Ghugal, “A sinusoidal beam theory for functionally graded sandwich curved beams,” Compos. Struct., vol. 226, pp. 1–13, 2019.
- P. V. Avhad and A. S. Sayyad, “On the static deformation of FG sandwich beams curved in elevation using a new higher order beam theory,” Sadhana., vol. 45, no. 1, pp. 1–16, 2020.
- P. V. Avhad and A. S. Sayyad, “Static analysis of functionally graded composite beams curved in elevation using higher order shear and normal deformation theory,” Mater. Today: Proc., vol. 20, pp. 1195–1194, 2020.
- H. Matsunaga, “Interlaminar stress analysis of laminated composite and sandwich circular arches subjected to thermal/mechanical loading,” Compos. Struct., vol. 60, no. 3, pp. 345–358, 2003. DOI: https://doi.org/10.1016/S0263-8223(02)00340-9.
- E. Carrera, “Developments, ideas and evaluations based upon Reissner’s mixed variational theorem in the modeling of multilayered plates and shells,” Appl. Mech. Rev., vol. 54, no. 4, pp. 301–329, 2001. DOI: https://doi.org/10.1115/1.1385512.
- E. Carrera, “An assessment of mixed and classical theories for the thermal stress analysis of orthotropic multilayered plates,” J. Therm. Stresses., vol. 23, no. 9, pp. 797–831, 2000. DOI: https://doi.org/10.1080/014957300750040096.
- E. Carrera, “Temperature profile influence on layered plates response considering classical and advanced theories,” Aiaa J, vol. 40, no. 9, pp. 1885–1896, 2002. DOI: https://doi.org/10.2514/2.1868.
- E. Carrera, “Transverse normal strain effects on thermal stress analysis of homogeneous and layered plates,” AIAA J., vol. 43, no. 10, pp. 2232–2242, 2005. DOI: https://doi.org/10.2514/1.11230.
- A. Robaldo and E. Carrera, “Mixed finite elements for thermo-elastic analysis of multilayered anisotropic plates,” J. Therm. Stresses, vol. 30, no. 2, pp. 165–194, 2007. DOI: https://doi.org/10.1080/01495730600897385.
- G. Giunta, N. Metla, S. Belouettar, A. J. M. Ferreira and E. Carrera, “A thermo-mechanical analysis of isotropic and composite beams via collocation with radial basis functions,” J. Therm. Stresses, vol. 36, no. 11, pp. 1169–1199, 2013. DOI: https://doi.org/10.1080/01495739.2013.819259.
- A. Entezari, M. Filippi and E. Carrera, “Unified finite element approach for generalized coupled thermoelastic analysis of 3D beam-type structures, part 1: Equations and formulation,” J. Therm. Stresses, vol. 40, no. 11, pp. 1386–1401, 2017. DOI: https://doi.org/10.1080/01495739.2017.1336740.
- M. Filippi, A. Entezari and E. Carrera, “Unified finite element approach for generalized coupled thermoelastic analysis of 3D beam-type structures, part 2: Numerical evaluations,” J. Therm. Stresses, vol. 40, no. 11, pp. 1402–1416, 2017. DOI: https://doi.org/10.1080/01495739.2017.1336741.
- G. Giunta, G. De Pietro, H. Nasser, S. Belouettar, E. Carrera and M. Petrolo, “A thermal stress finite element analysis of beam structures by hierarchical modelling,” Compos. Part B-Eng., vol. 95, pp. 179–195, 2016. DOI: https://doi.org/10.1016/j.compositesb.2016.03.075.
- G. Giunta, S. Belouettar and E. Carrera, “A thermal stress analysis of three-dimensional beams by refined one-dimensional models and strong form solutions,” AMM, vol. 828, pp. 139–171, 2016. DOI: https://doi.org/10.4028/www.scientific.net/AMM.828.139.
- W. T. Koiter, “A consistent first approximation in the general theory of thin elastic shells,” Proceedings of First Symposium on the Theory of Thin Elastic Shells, North-Holland, Amsterdam, 1960.