Dynamic thermomechanical analysis on stiffened composite plates with damage

References

• N. Jaunky, N. F. Knight Jr, and D. R. Ambur, “Formulation of an improved smeared stiffener theory for buckling analysis of grid-stiffened composite panels,” Compos. Part B Eng., vol. 27, no. 5, pp. 519–526, 1996. DOI: 10.1016/1359-8368(96)00032-7.
   Web of Science ®Google Scholar
• M. W. Hyer and D. Cohen, “Calculation of stresses in stiffened composite panels,” AIAA J., vol. 26, no. 7, pp. 852–857, 1988. DOI: 10.2514/3.9978.
   Google Scholar
• S. W. Gong and K. Y. Lam, “Transient response of stiffened composite plates subjected to low velocity impact,” Compos. Part B Eng., vol. 30, no. 5, pp. 473–484, 1999. DOI: 10.1016/S1359-8368(99)00002-5.
   Web of Science ®Google Scholar
• A. K. Noor, J. H. Stames Jr., and J. M. Peters, “Uncertainty analysis of stiffened composite panels,” Compos. Struct., vol. 51, no. 2, pp. 139–158, 2001. DOI: 10.1016/S0263-8223(00)00143-4.
   Web of Science ®Google Scholar
• R. Zimmermann, H. Klein, and A. Kling, “Buckling and postbuckling of stringer stiffened fibre composite curved panels tests and computations,” Compos. Struct., vol. 73, no. 2, pp. 150–161, 2006. DOI: 10.1016/j.compstruct.2005.11.050.
   Web of Science ®Google Scholar
• T. Mocker and H. G. Reimerdes, “Postbuckling simulation of curved stiffened composite panels by the use of strip elements,” Compos. Struct., vol. 73, no. 2, pp. 237–243, 2006. DOI: 10.1016/j.compstruct.2005.11.061.
   Web of Science ®Google Scholar
• E. Pietropaoli and A. Riccio, “A global/local finite element approach for predicting interlaminar and intralaminar damage evolution in composite stiffened panels under compressive load,” Appl. Compos. Mater., vol. 18, no. 2, pp. 113–125, 2011. DOI: 10.1007/s10443-010-9135-1.
   Web of Science ®Google Scholar
• M. Hemmatnezhad, G. H. Rahimi, and R. Ansari, “On the free vibrations of grid-stiffened composite cylindrical shells,” Acta Mech., vol. 225, no. 2, pp. 609–623, 2014. DOI: 10.1007/s00707-013-0976-1.
   Web of Science ®Google Scholar
• C. L. Liao and J. N. Reddy, “Continuum-based stiffened composite shell element for geometrically nonlinear analysis,” AIAA J., vol. 27, no. 1, pp. 95–101, 1989. DOI: 10.2514/3.10099.
   Google Scholar
• H. S. Das and D. Chakravorty, Bending analysis of stiffened composite conoidal shell roofs through finite element application, J. Compos. Mater., vol. 45, no. 5, pp. 525–542, 2011. DOI: 10.1177/0021998310376096.
   Web of Science ®Google Scholar
• R. Degenhardt, A. Kling, K. Rohwer, A. C. Orifici, and R. S. Thomson, “Design and analysis of stiffened composite panels including post-buckling and collapse,” Comput. Struct., vol. 86, no. 9, pp. 919–929, 2008. DOI: 10.1016/j.compstruc.2007.04.022.
   Web of Science ®Google Scholar
• E. Oterkus, E. Madenci, O. Weckner, S. Silling, P. Bogert, and A. Tessler, “Combined finite element and peridynamic analyses for predicting failure in a stiffened composite curved panel with a central slot,” Compos. Struct., vol. 94, no. 3, pp. 839–850, 2012. DOI: 10.1016/j.compstruct.2011.07.019.
   Web of Science ®Google Scholar
• J. T. S. Wang and T. M. Hsu, “Discrete analysis of stiffened composite cylindrical shells,” AIAA J., vol. 23, no. 11, pp. 1753–1761, 1985. DOI: 10.2514/3.9162.
   Google Scholar
• Y. B. Sudhirsastry, P. R. Budarapu, N. Madhavi, and Y. Krishna, “Buckling analysis of thin wall stiffened composite panels,” Comput. Mater. Sci., vol. 96, pp. 459–471, 2015. DOI: 10.1016/j.commatsci.2014.06.007.
   Web of Science ®Google Scholar
• D. Wang and M. M. Abdalla, “Global and local buckling analysis of grid-stiffened composite panels,” Compos. Struct., vol. 119, no. 119, pp. 767–776, 2015. DOI: 10.1016/j.compstruct.2014.09.050.
   Google Scholar
• B. G. Prusty, “Free vibration and buckling response of hat-stiffened composite panels under general loading,” Int. J. Mech. Sci., vol. 50, no. 8, pp. 1326–1333, 2008. DOI: 10.1016/j.ijmecsci.2008.03.003.
   Web of Science ®Google Scholar
• A. Riccio, A. Raimondo, and F. Scaramuzzino, “A study on skin delaminations growth in stiffened composite panels by a novel numerical approach,” Appl. Compos. Mater., vol. 20, no. 4, pp. 465–488, 2013. DOI: 10.1007/s10443-012-9282-7.
   Web of Science ®Google Scholar
• M. Hemmatnezhad, G. H. Rahimi, M. Tajik, and F. Pellicano, “Experimental, numerical and analytical investigation of free vibrational behavior of GFRP-stiffened composite cylindrical shells,” Compos. Struct., vol. 120, no. 1, pp. 509–518, 2015. DOI: 10.1016/j.compstruct.2014.10.011.
   Google Scholar
• A. Riccio, A. Raimondo, F. D. Caprio, and F. Scaramuzzino, “Delaminations buckling and growth phenomena in stiffened composite panels under compression. part II: a numerical study,” J. Compos. Mater., vol. 48, no. 23, pp. 2857–2870, 2014. DOI: 10.1177/0021998313502742.
   Web of Science ®Google Scholar
• B. P. Naganarayana, B. Z. Huang, and S. N. Atluri, “Multidomain modeling and analysis of delaminated stiffened composite shells,” AIAA J., vol. 34, no. 9, pp. 1894–1904, 1996. DOI: 10.2514/3.13323.
   Google Scholar
• W. Zhao and R. K. Kapania, “Buckling analysis of unitized curvilinearly stiffened composite panels,” Compos. Struct., vol. 135, pp. 365–382, 2016. DOI: 10.1016/j.compstruct.2015.09.041.
   Web of Science ®Google Scholar
• S. K. Kassegne and J. Reddy, “Local behavior of discretely stiffened composite plates and cylindrical shells,” Compos. Struct., vol. 41, no. 1, pp. 13–26, 1998. DOI: 10.1016/S0263-8223(98)00006-3.
   Web of Science ®Google Scholar
• D. Samaratunga, R. Jha, and S. Gopalakrishnan, “Wavelet spectral finite element for modeling guided wave propagation and damage detection in stiffened composite panels,” Struct. Health Monit., vol. 15, no. 3, pp. 317–334, 2016. DOI: 10.1177/1475921716640468.
   Web of Science ®Google Scholar
• M. Baruch and J. Singer, “Effect of eccentricity of stiffeners on the general instability of stiffened cylindrical shells under hydrostatic pressure,” J. Mech. Eng. Sci.,vol. 5, no. 1, pp. 23–27, 1963. DOI: 10.1243/JMES_JOUR_1963_005_005_02.
   Google Scholar
• A. D. Reddy, R. Valisetty, and L. W. Rehfield, “Continuous filament wound composite concepts for aircraft fuselage structures,” J. Aircr., vol. 22, no. 3, pp. 249–255, 1985. DOI: 10.2514/3.45115.
   Web of Science ®Google Scholar
• C. Mittelstedt and R. U. Schroeder, “Local postbuckling of hat-stringer-stiffened composite laminated plates under transverse compression,” Compos. Struct., vol. 92, no. 12, pp. 2830–2844, 2010. DOI: 10.1016/j.compstruct.2010.04.009.
   Web of Science ®Google Scholar
• C. Mittelstedt, “Closed-form buckling analysis of stiffened composite plates and identification of minimum stiffener requirements,” Int. J. Eng. Sci., vol. 46, no. 10, pp. 1011–1034, 2008. DOI: 10.1016/j.ijengsci.2008.02.004.
   Web of Science ®Google Scholar
• G. Qing, J. Qiu, and Y. Liu, “Free vibration analysis of stiffened laminated plates,” Int. J. Solids Struct., vol. 43, no. 6, pp. 1357–1371, 2006. DOI: 10.1016/j.ijsolstr.2005.03.012.
   Web of Science ®Google Scholar
• D. Li and L. Yan, “Three-dimensional semi-analytical model for the static response and sensitivity analysis of the composite stiffened laminated plate with interfacial imperfections,” Compos. Struct., vol. 94, no. 6, pp. 1943–1958, 2012. DOI: 10.1016/j.compstruct.2012.01.013.
   Web of Science ®Google Scholar
• V. M. Akula, “Multiscale reliability analysis of a composite stiffened panel,” Compos. Struct., vol. 116, pp. 432–440, 2014. DOI: 10.1016/j.compstruct.2014.06.001.
   Web of Science ®Google Scholar
• J. F. M. Wiggenraad and N. Bauld, “Global/local interlaminar stress analysis of a grid-stiffened composite panel,” J. Reinf. Plast. Compos., vol. 12, no. 2, pp. 237–253, 1993. DOI: 10.1177/073168449301200209.
   Web of Science ®Google Scholar
• E. Carrera, “Historical review of zig-zag theories for multilayered plates and shells,” Appl. Mech. Rev., vol. 56, no. 3, pp. 287–308, 2003. DOI: 10.1115/1.1557614.
   Google Scholar
• E. Carrera, “Developments, ideas, and evaluations based upon Reissner’s mixed variational theorem in the modeling of multilayered plates and shells,” Appl. Mech. Rev., vol. 54, no. 4, pp. 301–329, 2001. DOI: 10.1115/1.1385512.
   Google Scholar
• E. Carrera, “Theories and finite elements for multilayered, anisotropic, composite plates and shells,” Arch. Comput. Method. Eng., vol. 9, no. 2, pp. 87–140, 2002. DOI: 10.1007/BF02736649.
   Web of Science ®Google Scholar
• D. Li, G. Qing, and L. Yan, “A layerwise/solid-element method for the composite stiffened laminated cylindrical shell structures,” Compos. Struct., vol. 98, no. 3, pp. 215–227, 2013. DOI: 10.1016/j.compstruct.2012.11.013.
   Google Scholar
• D. H. Li, Y. Liu, and X. Zhang, “Low-velocity impact responses of the stiffened composite laminated plates based on the progressive failure model and the layerwise/solid-elements method,” Compos. Struct., vol. 110, no. 1, pp. 249–275, 2014. DOI: 10.1016/j.compstruct.2013.12.011.
   Google Scholar
• X. Lu, J. Y. Yang, Y. G. Wu, F. Zhang, and D. H. Li, “An extended layerwise/solid-element method of stiffened composite plates with delaminations and transverse crack,” Int. J. Mech. Mater. Des., vol. 14, no. 3, pp. 345–358, 2018. DOI: 10.1007/s10999-017-9378-1.
   Web of Science ®Google Scholar
• C. T. Herakovich and F. Mirzadeh, “Thermal-mechanical response of stiffened composite cylinders,” Appl. Mech. Rev., vol. 50, no. 11S, pp. S87–S92, 1997. DOI: 10.1115/1.3101855.
   Google Scholar
• A. Barut, “Nonlinear thermo-mechanical analysis of stiffened composite laminates by a new finite element,” Ph.D. thesis, University of Arizona, 1998.
   Google Scholar
• X. Shi, S. Li, C. Fei, and D. Bian, “Postbuckling and failure analysis of stiffened composite panels subjected to hydro/thermal/mechanical coupled environment under axial compression,” Compos. Struct., vol. 118, no. 1, pp. 600–606, 2014. DOI: 10.1016/j.compstruct.2014.08.022.
   Google Scholar
• N. D. Duc, N. D. Tuan, T. Q. Quan, N. V. Quyen, and T. V. Anh, “Nonlinear mechanical, thermal and thermo-mechanical postbuckling of imperfect eccentrically stiffened thin FGM cylindrical panels on elastic foundations,” Thin-Walled Struct., vol. 96, pp. 155–168, 2015. DOI: 10.1016/j.tws.2015.08.005.
   Web of Science ®Google Scholar
• L. Librescu and M. A. Souza, “Non-linear response of geometrically imperfect stiffened flat panels under thermomechanical loading,” J. Therm. Stress., vol. 21, no. 1, pp. 3–19, 1998. DOI: 10.1080/01495739808956132.
   Web of Science ®Google Scholar
• L. Librescu and M. A. Souza, “Nonlinear dynamics of stiffened flat panels under thermomechanical loads,” J. Aerosp. Eng., vol. 13, no. 3, pp. 78–84, 2000. DOI: 10.1061/(ASCE)0893-1321(2000)13:3(78).
   Web of Science ®Google Scholar
• P. K. Gotsis, C. C. Chamis, K. David, and F. Abdi, “Progressive fracture of laminated composite stiffened plate,” Theor. Appl. Fract. Mech., vol. 51, no. 2, pp. 144–147, 2009. DOI: 10.1016/j.tafmec.2009.04.008.
   Web of Science ®Google Scholar
• A. Benjeddou and O. Andrianarison, “A heat mixed variational theorem for thermoelastic multilayered composites,” Comput. Struct., vol. 84, no. 19-20, pp. 1247–1255, 2006. DOI: 10.1016/j.compstruc.2006.01.019.
   Web of Science ®Google Scholar
• D. H. Li, Y. Liu, and X. Zhang, “An extended layerwise method for composite laminated beams with multiple delaminations and matrix cracks,” Int. J. Numer. Meth. Eng., vol. 101, no. 6, pp. 407–434, 2015. DOI: 10.1002/nme.4803.
   Web of Science ®Google Scholar
• D. H. Li, “Delamination and transverse crack growth prediction for laminated composite plates and shells,” Comput. Struct., vol. 177, pp. 39–55, 2016. DOI: 10.1016/j.compstruc.2016.07.011.
   Web of Science ®Google Scholar
• D. H. Li, X. Zhang, K. Y. Sze, and Y. Liu, “Extended layerwise method for laminated composite plates with multiple delaminations and transverse cracks,” Comput. Mech., vol. 58, no. 4, pp. 657–679, 2016. DOI: 10.1007/s00466-016-1310-2.
   Web of Science ®Google Scholar
• D. H. Li, F. Zhang, and J. X. Xu, “Incompatible extended layerwise method for laminated composite shells,” Int. J. Mech. Sci., vol. 119, pp. 243–252, 2016. DOI: 10.1016/j.ijmecsci.2016.10.022.
   Web of Science ®Google Scholar
• D. Li and F. Zhang, “Full extended layerwise method for the simulation of laminated composite plates and shells,” Comput. Struct., vol. 187, pp. 101–113, 2017. DOI: 10.1016/j.compstruc.2016.10.023.
   Web of Science ®Google Scholar
• D. H. Li and J. Fish, “Thermomechanical extended layerwise method for laminated composite plates with multiple delaminations and transverse cracks,” Compos. Struct., vol. 185, no. Feb, pp. 665–683, 2018. DOI: 10.1016/j.compstruct.2017.11.050.
   Google Scholar