References
- G. Buonanno, M. Dell’Isola, A. Frattolillo and G. Giovinco, “Thermal analysis of a glass bending process,” Appl. Thermal Eng., vol. 25, no. 14–15, pp. 2108–2121, 2005. https://www.sciencedirect.com/science/article/pii/S1359431105000542. DOI: 10.1016/j.applthermaleng.2005.01.008.
- J. Cesar de Sa, “Numerical modelling of glass forming processes,” Eng. Comput., vol. 3, no. 4, pp. 266–275, 1986. https://www.emerald.com/insight/content/doi/10.1108/eb023666/full/html. DOI: 10.1108/eb023666.
- L. Daudeville and H. Carre, “Thermal tempering simulation of glass plates: inner and edge residual stresses,” J. Thermal Stress., vol. 21, no. 6, pp. 667–689, 1998. DOI: 10.1080/01495739808956168.
- D. Lochegnies and R. M. Mattheij, Modelling of Glass Forming and Tempering. Hermes Science, 1999.
- D. Lochegnies and M. Cable, “Modelling and control of glass forming and tempering,” Int. J. Forming Process., vol. 7, no. 4, 2004.
- J. Nielsen, J. Olesen, P. Poulsen and H. Stang, “Finite element implementation of a glass tempering model in three dimensions,” Comput. Struct., vol. 88, no. 17–18, pp. 963–972, 2010. http://linkinghub.elsevier.com/retrieve/pii/S0045794910001264. DOI: 10.1016/j.compstruc.2010.05.004.
- J. A. W. M. Groot, C. G. Giannopapa and R. M. M. Mattheij, “Development of a numerical optimization method for blowing glass Parison shapes,” J. Manufact. Sci. Eng., vol. 133, no. 1, pp. 11010, 2011. https://asmedigitalcollection.asme.org/manufacturingscience/article/doi/10.1115/1.4003331/433381/Development-of-a-Numerical-Optimization-Method-for. DOI: 10.1115/1.4003331.
- N. Siedow, D. Lochegnies, F. Béchet, P. Moreau, H. Wakatsuki and N. Inoue, “Axisymmetric modeling of the thermal cooling, including radiation, of a circular glass disk,” Int. J. Heat Mass Transf., vol. 89, pp. 414–424, 2015. https://linkinghub.elsevier.com/retrieve/pii/S0017931015004615. DOI: 10.1016/j.ijheatmasstransfer.2015.04.091.
- P. Ryzhakov, J. García and E. Oñate, “Lagrangian finite element model for the 3D simulation of glass forming processes,” Comput. Struct., vol. 177, pp. 126–140, 2016. https://linkinghub.elsevier.com/retrieve/pii/S0045794916309099. DOI: 10.1016/j.compstruc.2016.09.007.
- R. E. Field and R. Viskanta, “Measurement and prediction of the dynamic temperature distributions in soda-lime glass plates,” J. Am. Ceramic Soc., vol. 73, no. 7, pp. 2047–2053, 1990. DOI: 10.1111/j.1151-2916.1990.tb05265.x.
- M. Rubin, “Optical properties of soda lime silica glasses,” Solar Energy Mater., vol. 12, no. 4, pp. 275–288, 1985. DOI: 10.1016/0165-1633(85)90052-8.
- M. F. Modest, Radiative Heat Transfer. New York: McGraw-Hill, 1993.
- R. Siegel and J. R. Howell, Thermal Radiation Heat Transfer: Radiation Transfer with Absorbing, Emitting, and Scattering Media, Vol. 164, Scientific and Technical Information Division, National Aeronautics and Space Administration, 1971.
- R. Viskanta and E. Anderson, “Heat transfer in semitransparent solids.” In Advances in Heat Transfer, Vol. 11, 1975, pp. 317–441. DOI: 10.1016/S0065-2717(08)70077-7.
- H. Loch, D. Krause (Eds.), Mathematical Simulation in Glass Technology, Schott Series on Glass and Glass Ceramics, Berlin Heidelberg, Berlin, Heidelberg: Springer, 2002. DOI: 10.1007/978-3-642-55966-2.
- A. Farina, A. Klar, R. M. Mattheij, A. Mikelic and N. Siedow, Mathematical models in the manufacturing of glass, 2010. http://link.springer.com/content/pdf/10.1007/978-3-642-15967-1.pdf
- J. C. de Sá, S. Grégoire, P. Moreau and D. Lochegnies, “Modelling thermal contact resistance on glass forming processes with special interface finite elements.” In III European Conference on Computational Mechanics, Dordrecht: Springer, 2006, pp. 337–337.
- K. Agboka, F. Béchet, N. Siedow and D. Lochegnies, “Influence of radiative heat transfer model on the computation of residual stresses in glass tempering process,” Int. J. Appl. Glass Sci., vol. 9, no. 2, pp. 235–251, 2018. DOI: 10.1111/ijag.12335.
- S. Rosseland, “Note on the absorption of radiation within a star,” Monthly Notices Royal Astronom. Soc., vol. 84, no. 7, pp. 525–528, 1924. DOI: 10.1093/mnras/84.7.525.
- U. Fotheringham and F.-T. Lentes, “Active thermal conductivity of hot glass,” Glass Sci. Technol. (Frankfurt), vol. 67, no. 12, pp. 335–342, 1994.
- D. Mann, R. E. Field and R. Viskanta, “Determination of specific heat and true thermal conductivity of glass from dynamic temperature data,” Wärme-Und Stoffübertragung, vol. 27, no. 4, pp. 225–231, 1992. http://link.springer.com/article/10.1007/BF01589920. DOI: 10.1007/BF01589920.
- A. Biosca, S. Borrós, V. Pedret Clemente, M. R. Hyre and A. García Granada, “Numerical and experimental study of blow and blow for perfume bottles to predict glass thickness and blank mold influence,” Int. J. Appl. Glass Sci., vol. 10, no. 4, pp. 569–583, 2019. DOI: 10.1111/ijag.13208.
- F. Béchet, N. Siedow and D. Lochegnies, “Two-dimensional finite element modeling of glass forming and tempering processes, including radiative effects,” Finite Elements Anal. Design, vol. 94, pp. 16–23, 2015. DOI: 10.1016/j.finel.2014.09.008.
- S. Chandrasekhar, Radiative Transfer. Oxford, Clarendon Press, 1950.
- K. H. Lee and R. Viskanta, “Transient conductive-radiative cooling of an optical quality glass disk,” Int. J. Heat and Mass Transf., vol. 41, no. 14, pp. 2083–2096, 1998. DOI: 10.1016/S0017-9310(97)00373-6.
- K. A. Ismail and C. T. Salinas, “Gray radiative conductive 2D modeling using discrete ordinates method with multidimensional spatial scheme and non-uniform grid,” Int. J. Thermal Sci., vol. 45, no. 7, pp. 706–715, 2006. https://www.sciencedirect.com/science/article/pii/S1290072905002231. DOI: 10.1016/j.ijthermalsci.2005.10.004.
- M. Badri, P. Jolivet, B. Rousseau, S. Le Corre, H. Digonnet and Y. Favennec, “Vectorial finite elements for solving the radiative transfer equation,” J. Quantitative Spectros. Radiative Transf, vol. 212, pp. 59–74, 2018. https://linkinghub.elsevier.com/retrieve/pii/S0022407317309597. DOI: 10.1016/j.jqsrt.2018.03.024.
- N. Siedow, T. Grosan, D. Lochegnies and E. Romero, “Application of a new method for radiative heat transfer to flat glass tempering,” J. Am. Ceramic Soc., vol. 88, no. 8, pp. 2181–2187, 2005. DOI: 10.1111/j.1551-2916.2005.00402.x.
- J. Lemaitre and J.-L. Chaboche, Mechanics of Solid Materials, Cambridge: Cambridge university press, 1994.
- O. Narayanaswamy, “A model of structural relaxation in glass,” J. Am. Ceramic Society, vol. 54, no. 10, pp. 491–498, 1971. http://onlinelibrary.wiley.com/doi/10.1111/j.1151-2916.1971.tb12186.x/abstract. DOI: 10.1111/j.1151-2916.1971.tb12186.x.
- H. H. S. Carslaw and J. J. C. Jaeger, Conduction of Heat in Solids, London: Oxford University Press, 1959.
- C. Fellows and F. Shaw, “A laboratory investigation of glass to mould heat transfer during pressing,” Glass Technol., vol. 19, no. 1, pp. 4–9, 1978.
- R. Gardon, “Calculation of temperature distributions in glass plates undergoing heat-treatment,” J. Am. Ceramic Soc., vol. 41, no. 6, pp. 200–209, 1958. http://onlinelibrary.wiley.com/doi/10.1111/j.1151-2916.1958.tb13541.x/abstract. DOI: 10.1111/j.1151-2916.1958.tb13541.x.
- Y. Shi, X. Chen, C. Sun and X.-L. Xia, “Temperature-dependent thermal conductivity and absorption coefficient identification of quartz window up to 1100 K,” J. Therm. Sci., vol. 32, no. 1, pp. 44–58, 2023. DOI: 10.1007/s11630-022-1747-x.
- N. Siedow, T. Grosan, D. Lochegnies and E. Romero, “Application of a new method for radiative heat transfer to flat glass tempering,” J. Am. Ceram. Soc., vol. 88, no. 8, pp. 2181–2187, 2005.
- W. A. Fiveland, “The selection of discrete ordinate quadrature sets for anisotropic scattering,” Fundamentals Radiation Heat Transfer, vol. 160, pp. 89–96, 1991.
- M. M. Razzaque, D. E. Klein and J. R. Howell, “Finite element solution of radiative heat transfer in a two-dimensional rectangular enclosure with gray participating media,” Journal of Heat Transfer, vol. 105, no. 4, pp. 933–936, 1983. https://asmedigitalcollection.asme.org/heattransfer/article/105/4/933/414425/Finite-Element-Solution-of-Radiative-Heat-Transfer. DOI: 10.1115/1.3245690.
- Openmp 5.1 reference guide. (Nov. 2020), Report, OpenMP, 2020. https://www.openmp.org/wp-content/uploads/OpenMPRefCard-5.1-web.pdf
- A. Markovsky, T. F. Soules and D. C. Boyd, “An efficient and stable algorithm for calculating fictive temperatures,” J. Am. Ceram. Soc., vol. 67, no. 4, pp. 56–57, 1984. DOI: 10.1111/j.1151-2916.1984.tb18826.x.
- A. Jain and A. Y. Yi, “Numerical modeling of viscoelastic stress relaxation during glass lens forming process,” J. Am. Ceram. Soc., vol. 88, no. 3, pp. 530–535, 2005. DOI: 10.1111/j.1551-2916.2005.00114.x.
- G. Dusserre, G. Dour and G. Bernhart, “In-situ determination of the heat flux density at the glass/mould interface during a glass pressing production cycle,” Int. J. Thermal Sci., vol. 48, no. 2, pp. 428–439, 2009. https://www.sciencedirect.com/science/article/pii/S1290072908001245. DOI: 10.1016/j.ijthermalsci.2008.05.010.
- S. Freiman, “Fracture mechanics of glass, in,” Glass Science and Technology, Vol. 5, New York: Academc Press, 1980, pp. 21–78.
- H. Carré and L. Daudeville, “Load-bearing capacity of tempered structural glass,” J. Eng. Mech., vol. 125, no. 8, pp. 914–921, 1999. DOI: 10.1061/(ASCE)0733-9399(1999)125:8(914).
- M. Haldimann, A. Luible and M. Overend, Structural Use of Glass, Vol. 10, Zurich: IABSE-AIPC-IVBH, 2008.
- K. C. Datsiou and M. Overend, “Weibull parameter estimation and goodness-of-fit for glass strength data,” Structural Safety, vol. 73, pp. 29–41, 2018. DOI: 10.1016/j.strusafe.2018.02.002.
- F. Monnoyer and D. Lochegnies, “Heat transfer and flow characteristics of the cooling system of an industrial glass tempering unit,” Applied Thermal Engineering, vol. 28, no. 17–18, pp. 2167–2177, 2008. https://www.sciencedirect.com/science/article/pii/S1359431108000021. DOI: 10.1016/j.applthermaleng.2007.12.014.
- F. Schwarzl and A. Staverman, “Time-temperature dependence of linear viscoelastic behavior,” Journal of Applied Physics, vol. 23, no. 8, pp. 838–843, 1952. DOI: 10.1063/1.1702316.
- A. Q. Tool, “Relation between inelastic deformability and thermal expansion of glass in its annealing range,” Journal of the American Ceramic Society, vol. 29, no. 9, pp. 240–253, 1946. DOI: 10.1111/j.1151-2916.1946.tb11592.x.
- R. Gardon and O. S. Narayanaswamy, “Stress and volume relaxation in annealing flat glass,” Journal of the American Ceramic Society, vol. 53, no. 7, pp. 380–385, 1970. http://onlinelibrary.wiley.com/doi/10.1111/j.1151-2916.1970.tb12137.x/abstract. DOI: 10.1111/j.1151-2916.1970.tb12137.x.