References
- Ahmad, M., Alkan, B., Ahmad, B., Vera, D., Harrison, R., Meredith, J., & Bindel, A. (2016). The use of a complexity model to facilitate in the selection of a fuel cell assembly sequence. Procedia Cirp, 44, 169–174. https://doi.org/https://doi.org/10.1016/j.procir.2016.02.054
- Alkan, B. (2018). A complexity modelling approach to support early life-cycle phases of assembly automation systems (Doctoral dissertation). University of Warwick.
- Alkan, B. (2019). An experimental investigation on the relationship between perceived assembly complexity and product design complexity. International Journal on Interactive Design and Manufacturing (IJIDEM), 13(3), 1145–1157. https://doi.org/https://doi.org/10.1007/s12008-019-00556-9
- Alkan, B., & Harrison, R. (2019). A virtual engineering based approach to verify structural complexity of component-based automation systems in early design phase. Journal of Manufacturing Systems, 53, 18–31. https://doi.org/https://doi.org/10.1016/j.jmsy.2019.09.001
- Alkan, B., Vera, D., Ahmad, B., & Harrison, R. (2018). A method to assess assembly complexity of industrial products in early design phase. IEEE Access, 6, 989–999. https://doi.org/https://doi.org/10.1109/ACCESS.2017.2777406
- Alkan, B., Vera, D., Ahmad, M., Ahmad, B., & Harrison, R. (2016a). Design evaluation of automated manufacturing processes based on complexity of control logic. Procedia Cirp, 50, 141–146. https://doi.org/https://doi.org/10.1016/j.procir.2016.05.031
- Alkan, B., Vera, D., Ahmad, M., Ahmad, B., & Harrison, R. (2016b). A model for complexity assessment in manual assembly operations through predetermined motion time systems. Procedia Cirp, 44, 429–434. https://doi.org/https://doi.org/10.1016/j.procir.2016.02.111
- Alkan, B., Vera, D., Chinnathai, M. K., & Harrison, R. (2017). Assessing complexity of component-based control architectures used in modular automation systems. International Journal of Computer and Electrical Engineering, 9(1), 393–402. https://doi.org/https://doi.org/10.17706/IJCEE.2017.9.1.393-402
- Alkan, B., Vera, D. A., Ahmad, M., Ahmad, B., & Harrison, R. (2018). Complexity in manufacturing systems and its measures: A literature review. European J. of Industrial Engineering, 12(1), 116–150. https://doi.org/https://doi.org/10.1504/EJIE.2018.089883
- Amrina, E., & Vilsi, A. L. (2015). Key performance indicators for sustainable manufacturing evaluation in cement industry. Procedia Cirp, 26(1), 19–23. https://doi.org/https://doi.org/10.1016/j.procir.2014.07.173
- Assad, F., Alkan, B., Chinnathai, M., Ahmad, M., Rushforth, E., & Harrison, R. (2019). A framework to predict energy related key performance indicators of manufacturing systems at early design phase. Procedia Cirp, 81, 145–150. https://doi.org/https://doi.org/10.1016/j.procir.2019.03.026
- Brockwell, P. J., & Davis, R. A. (2016). Introduction to time series and forecasting. Springer.
- Calinescu, A., Efstathiou, J., Schirn, J., & Bermejo, J. (1998). Applying and assessing two methods for measuring complexity in manufacturing. The Journal of the Operational Research Society, 49(7), 723–733. https://doi.org/https://doi.org/10.2307/3010243
- Chryssolouris, G. (2013). Manufacturing systems: Theory and practice. Springer Science & Business Media.
- Chryssolouris, G., Efthymiou, K., Papakostas, N., Mourtzis, D., & Pagoropoulos, A. (2013). Flexibility and complexity: Is it a trade-off? International Journal of Production Research, 51(23-24), 6788–6802. https://doi.org/https://doi.org/10.1080/00207543.2012.761362
- Chryssolouris, G., Giannelos, N., Papakostas, N., & Mourtzis, D. (2004). Chaos theory in production scheduling. CIRP Annals, 53(1), 381–383. https://doi.org/https://doi.org/10.1016/S0007-8506(07)60721-5
- Cover, T. M., & Thomas, J. A. (2012). Elements of information theory. John Wiley & Sons.
- Deb, C., Zhang, F., Yang, J., Lee, S. E., & Shah, K. W. (2017). A review on time series forecasting techniques for building energy consumption. Renewable and Sustainable Energy Reviews, 74, 902–924. https://doi.org/https://doi.org/10.1016/j.rser.2017.02.085
- Deshmukh, A. V., Talavage, J. J., & Barash, M. M. (1998). Complexity in manufacturing systems, part 1: Analysis of static complexity. IIE Transactions, 30(7), 645–655. https://doi.org/https://doi.org/10.1080/07408179808966508
- Donner, R., Scholz-Reiter, B., & Hinrichs, U. (2008). Nonlinear characterization of the performance of production and logistics networks. Journal of Manufacturing Systems, 27(2), 84–99. https://doi.org/https://doi.org/10.1016/j.jmsy.2008.10.001
- Efstathiou, J., Calinescu, A., & Blackburn, G. (2002). A web-based expert system to assess the complexity of manufacturing organizations. Robotics and Computer-Integrated Manufacturing, 18(3-4), 305–311. https://doi.org/https://doi.org/10.1016/S0736-5845(02)00022-4
- Efthymiou, K. (2013). On the assessment of manufacturing systems complexity. University of Patras.
- Efthymiou, K., Mourtzis, D., Pagoropoulos, A., Papakostas, N., & Chryssolouris, G. (2016). Manufacturing systems complexity analysis methods review. International Journal of Computer Integrated Manufacturing, 29(9), 1025–1044. https://doi.org/https://doi.org/10.1080/0951192X.2015.1130245
- Efthymiou, K., Pagoropoulos, A., Papakostas, N., Mourtzis, D., & Chryssolouris, G. (2012). Manufacturing systems complexity review: Challenges and outlook. Procedia Cirp, 3, 644–649. https://doi.org/https://doi.org/10.1016/j.procir.2012.07.110
- Efthymiou, K., Pagoropoulos, A., Papakostas, N., Mourtzis, D., & Chryssolouris, G. (2014). Manufacturing systems complexity: An assessment of manufacturing performance indicators unpredictability. CIRP Journal of Manufacturing Science and Technology, 7(4), 324–334. https://doi.org/https://doi.org/10.1016/j.cirpj.2014.07.003
- ElMaraghy, H., Schuh, G., ElMaraghy, W., Piller, F., Schönsleben, P., Tseng, M., & Bernard, A. (2013). Product variety management. Cirp Annals, 62(2), 629–652. https://doi.org/https://doi.org/10.1016/j.cirp.2013.05.007
- ElMaraghy, H. A. (2005). Flexible and reconfigurable manufacturing systems paradigms. International Journal of Flexible Manufacturing Systems, 17(4), 261–276. https://doi.org/https://doi.org/10.1007/s10696-006-9028-7
- ElMaraghy, W., & Urbanic, R. J. (2003). Modelling of manufacturing systems complexity. CIRP Annals, 52(1), 363–366. https://doi.org/https://doi.org/10.1016/S0007-8506(07)60602-7
- Falck, A.-C., Örtengren, R., & Rosenqvist, M. (2012). Relationship between complexity in manual assembly work, ergonomics and assembly quality. In Ergonomics for sustainability and growth, nes 2012 (nordiska ergonomisällskapet) konferens, Saltsjöbaden, Stockholm, 19–22 augusti, 2012.
- Frizelle, G., & Suhov, Y. M. (2001). An entropic measurement of queueing behaviour in a class of manufacturing operations. Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences, 457(2011), 1579–1601. https://doi.org/https://doi.org/10.1098/rspa.2000.0731
- Frizelle, G., & Woodcock, E. (1995). Measuring complexity as an aid to developing operational strategy. International Journal of Operations & Production Management, 15(5), 26–39. https://doi.org/https://doi.org/10.1108/01443579510083640
- Garbie, I. H., & Shikdar, A. (2010). Design for manufacturing systems complexity: A perspective approach [Paper presentation]. ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis (pp. 751–762). https://doi.org/https://doi.org/10.1115/ESDA2010-25033
- Gell-Mann, M. (1995). The quark and the jaguar: Adventures in the simple and the complex. Macmillan.
- Giannelos, N., Papakostas, N., Mourtzis, D., & Chryssolouris, G. (2007). Dispatching policy for manufacturing jobs and time-delay plots. International Journal of Computer Integrated Manufacturing, 20(4), 329–337. https://doi.org/https://doi.org/10.1080/09511920600786604
- Ibáñez-Molina, A. J., Iglesias-Parro, S., Soriano, M. F., & Aznarte, J. I. (2015). Multiscale Lempel–Ziv complexity for EEG measures. Clinical Neurophysiology, 126(3), 541–548. https://doi.org/https://doi.org/10.1016/j.clinph.2014.07.012
- Irani, Z. (2010). Investment evaluation within project management: An information systems perspective. Journal of the Operational Research Society, 61(6), 917–928. https://doi.org/https://doi.org/10.1057/jors.2010.10
- Katzorke, I., & Pikovsky, A. (2000). Chaos and complexity in a simple model of production dynamics. Discrete Dynamics in Nature and Society, 5(3), 179–187. https://doi.org/https://doi.org/10.1155/S1026022600000510
- Kim, Y.-S. (1999). A system complexity approach for the integration of product development and production system design [Unpublished doctoral dissertation]. Massachusetts Institute of Technology.
- Kohr, D., Ahmad, M., Alkan, B., Chinnathai, M. K., Budde, L., Vera, D. A., Friedli, T., & Harrison, R. (2018). Proposing a holistic framework for the assessment and management of manufacturing complexity through data-centric and human-centric approaches. In Complexis (pp. 86–93).
- Lempel, A., & Ziv, J. (1976). On the complexity of finite sequences. IEEE Transactions on Information Theory, 22(1), 75–81. https://doi.org/https://doi.org/10.1109/TIT.1976.1055501
- Massotte, P. (1996). Behavioural analysis of a complex system. The International Journal of Advanced Manufacturing Technology, 12(1), 66–76. https://doi.org/https://doi.org/10.1007/BF01178963
- Mattsson, S., Gullander, P., & Davidsson, A. (2011). Method for measuring production complexity [Paper presentation]. 28th International Manufacturing Conference.
- Mattsson, S., Tarrar, M., & Fast-Berglund, Å. (2016). Perceived production complexity–understanding more than parts of a system. International Journal of Production Research, 54(20), 6008–6016. https://doi.org/https://doi.org/10.1080/00207543.2016.1154210
- Mihailović, D. T., Mimić, G., Drešković, N., & Arsenić, I. (2015). Kolmogorov complexity based information measures applied to the analysis of different river flow regimes. Entropy, 17(5), 2973–2987. https://doi.org/https://doi.org/10.3390/e17052973
- Mihailović, D. T., Mimić, G., Nikolić-Djorić, E., & Arsenić, I. (2015). Novel measures based on the Kolmogorov complexity for use in complex system behavior studies and time series analysis. Open Physics, 13(1), 1–14. https://doi.org/https://doi.org/10.1515/phys-2015-0001
- Montgomery, D. C., Jennings, C. L., & Kulahci, M. (2015). Introduction to time series analysis and forecasting. John Wiley & Sons.
- Mourtzis, D., Doukas, M., & Psarommatis, F. (2013). Design and operation of manufacturing networks for mass customisation. CIRP Annals, 62(1), 467–470. https://doi.org/https://doi.org/10.1016/j.cirp.2013.03.126
- Papakostas, N., Efthymiou, K., Mourtzis, D., & Chryssolouris, G. (2009). Modelling the complexity of manufacturing systems using nonlinear dynamics approaches. CIRP Annals, 58(1), 437–440. https://doi.org/https://doi.org/10.1016/j.cirp.2009.03.032
- Papakostas, N., & Mourtzis, D. (2007). An approach for adaptability modeling in manufacturing–analysis using chaotic dynamics. CIRP Annals, 56(1), 491–494. https://doi.org/https://doi.org/10.1016/j.cirp.2007.05.117
- Rivolta, M. W., Migliorini, M., Aktaruzzaman, M., Sassi, R., & Bianchi, A. M. (2014). Effects of the series length on lempel-ziv complexity during sleep [Paper presentation]. Engineering in Medicine and Biology Society (EMBC), 2014 36th Annual International Conference of the IEEE (pp. 693–696).
- Samy, S., & ElMaraghy, H. (2012). A model for measuring complexity of automated and hybrid assembly systems. The International Journal of Advanced Manufacturing Technology, 62(5-8), 813–833. https://doi.org/https://doi.org/10.1007/s00170-011-3844-y
- Samy, S. N., & ElMaraghy, H. (2010). A model for measuring products assembly complexity. International Journal of Computer Integrated Manufacturing, 23(11), 1015–1027. https://doi.org/https://doi.org/10.1080/0951192X.2010.511652
- Sarkis, J. (1997). An empirical analysis of productivity and complexity for flexible manufacturing systems. International Journal of Production Economics, 48(1), 39–48. https://doi.org/https://doi.org/10.1016/S0925-5273(96)00025-4
- Schmitz, J., Van Beek, D., & Rooda, J. (2002). Chaos in discrete production systems? Journal of Manufacturing Systems, 21(3), 236–246. https://doi.org/https://doi.org/10.1016/S0278-6125(02)80164-9
- Schoettl, F., Paefgen, M.-C., & Lindemann, U. (2014). Approach for measuring change-induced complexity based on the production architecture [Paper presentation]. 47th Cirp Conference on Manufacturing Systems (pp. 934–939).
- Scholz-Reiter, B., Freitag, M., & Schmieder, A. (2002). Modelling and control of production systems based on nonlinear dynamics theory. CIRP Annals, 51(1), 375–378. https://doi.org/https://doi.org/10.1016/S0007-8506(07)61540-6
- Shahid, J. (2019). InfluxDB documentation. Release.
- Shannon, C. E. (2001). A mathematical theory of communication. ACM SIGMOBILE Mobile Computing and Communications Review, 5(1), 3–55. https://doi.org/https://doi.org/10.1145/584091.584093
- Sivadasan, S., Efstathiou, J., Calinescu, A., & Huatuco, L. H. (2006). Advances on measuring the operational complexity of supplier–customer systems. European Journal of Operational Research, 171(1), 208–226. https://doi.org/https://doi.org/10.1016/j.ejor.2004.08.032
- Sivadasan, S., Smart, J., Huaccho Huatuco, L., & Calinescu, A. (2010). Operational complexity and supplier–customer integration: Case study insights and complexity rebound. Journal of the Operational Research Society, 61(12), 1709–1718. https://doi.org/https://doi.org/10.1057/jors.2009.138
- Volz, J., & Rabenstein, B. (2015). Prometheus: A next-generation monitoring system (workshop).
- Vrabič, R., & Butala, P. (2011). Computational mechanics approach to managing complexity in manufacturing systems. CIRP Annals, 60(1), 503–506. https://doi.org/https://doi.org/10.1016/j.cirp.2011.03.050
- Wiendahl, H.-P., & Scheffczyk, H. (1999). Simulation based analysis of complex production systems with methods of nonlinear dynamics. CIRP Annals, 48(1), 357–360. https://doi.org/https://doi.org/10.1016/S0007-8506(07)63201-6
- Windt, K., Philipp, T., & Böse, F. (2008). Complexity cube for the characterization of complex production systems. International Journal of Computer Integrated Manufacturing, 21(2), 195–200. https://doi.org/https://doi.org/10.1080/09511920701607725
- Wu, Y., Frizelle, G., & Efstathiou, J. (2007). A study on the cost of operational complexity in customer–supplier systems. International Journal of Production Economics, 106(1), 217–229. https://doi.org/https://doi.org/10.1016/j.ijpe.2006.06.004
- Wu, Y. R., Huatuco, L. H., Frizelle, G., & Smart, J. (2013). A method for analysing operational complexity in supply chains. Journal of the Operational Research Society, 64(5), 654–667. https://doi.org/https://doi.org/10.1057/jors.2012.63
- Yentes, J. M., Hunt, N., Schmid, K. K., Kaipust, J. P., McGrath, D., & Stergiou, N. (2013). The appropriate use of approximate entropy and sample entropy with short data sets. Annals of Biomedical Engineering, 41(2), 349–365. https://doi.org/https://doi.org/10.1007/s10439-012-0668-3
- Zhang, T., & Efstathiou, J. (2006). The complexity of mass customization systems under different inventory strategies. International Journal of Computer Integrated Manufacturing, 19(5), 423–433. https://doi.org/https://doi.org/10.1080/09511920500399011
- Zhang, X.-S., Roy, R. J., & Jensen, E. W. (2001). Eeg complexity as a measure of depth of anesthesia for patients. IEEE Transactions on Bio-Medical Engineering, 48(12), 1424–1433. https://doi.org/https://doi.org/10.1109/10.966601
- Zhang, Y., Wei, S., Liu, H., Zhao, L., & Liu, C. (2016). A novel encoding lempel–ziv complexity algorithm for quantifying the irregularity of physiological time series. Computer Methods and Programs in Biomedicine, 133, 7–15. https://doi.org/https://doi.org/10.1016/j.cmpb.2016.05.010
- Zhang, Z. (2012). Manufacturing complexity and its measurement based on entropy models. The International Journal of Advanced Manufacturing Technology, 62(9-12), 867–873. https://doi.org/https://doi.org/10.1007/s00170-011-3872-7