The effect of processing parameters on the bond strength and electrical conductivity of multi-wall carbon nanotube/low-density polyethylene composite

References

• Huang , DY and Chen , RS . 1999 . Bonding strength at solid-melt interface for polystyrene in a sequential two-staged injection molding process . Polym. Eng. Sci. , 39 : 2159 – 2171 .
   Google Scholar
• Haberstroh , E and Ronnewinkel , C . 2001 . LSR thermoplastic combination parts in two-component injection molding . J. Polym. Eng. , 21 : 303 – 318 .
   Google Scholar
• Islam , A , Hansen , HN , Tang , PT and Sun , J . 2009 . Process chains for the manufacturing of moulded interconnects devices . Int. J. Adv. A , 42 : 831 – 841 .
   Google Scholar
• Islam , A , Hansen , HN and Bondo , M . 2010 . Experimental investigation of the factors influencing the polymer–polymer bond strength during two-component injection moulding . Int. J. Adv. Manuf. Technol. , 50 : 101 – 111 .
   Google Scholar
• Breuer , O and Sundararaj , U . 2004 . Big return from small fibers: a review of polymer/carbon nanotube composites . Polym. Compos. , 25 : 630 – 645 .
   Web of Science ®Google Scholar
• Coleman , JN , Khan , U , Blau , WJ and Gunko , YK . 2006 . Small but strong: a review of the mechanical properties of carbon nanotube-polymer composites . Carbon. , 44 : 1624 – 1652 .
   Web of Science ®Google Scholar
• Esawi , AMK and Farag , MM . 2007 . Carbon nanotube reinforced composites: potential and current challenges . Mater. Des. , 28 : 2394 – 2401 .
   Web of Science ®Google Scholar
• Ramasubramaniam , R , Chen , J and Liu , HY . 2003 . Homogeneous carbon nanotube/polymer composites for electrical applications . Appl. Phys. Lett. , 83 : 2928 – 2930 .
   Web of Science ®Google Scholar
• Ashraf , B , Hubert , P and Vengallatore , S . 2006 . Carbon nanotube-reinforced composites as structural materials for microactuators in microelectromechanical systems . Nanotechnol. , 17 : 4895 – 4903 .
   Google Scholar
• Liang , GD and Tjong , SC . 2006 . Electrical properties of low-density polyethylene/multiwalled carbon nanotube nanocomposites . Mater. Chem. Phys. , 100 : 132 – 137 .
   Web of Science ®Google Scholar
• Abbasi , S , Carreau , PJ and Derdouri , A . 2010 . Flow induced orientation of multiwalled carbon nanotubes in polycarbonate nanocomposites: rheology, conductivity and mechanical properties . Polymer. , 51 : 922 – 935 .
   Web of Science ®Google Scholar
• Souier , T , Santos , S , Ghaferi , A , Stefancich , M and Chiesa , M . 2012 . Enhanced electrical properties of vertically aligned carbon nanotube-epoxy nanocomposites with high packing density . Nanoscale Res. Lett. , 7 : 630 doi: 10.1186/1556-276X-7-630
   Google Scholar
• Müller , MT , Krause , B , Kretzschmar , B and Pötschke , P . 2011 . Influence of feeding conditions in twin-screw extrusion of PP/MWCNT composites on electrical and mechanical properties . Compos. Sci. Technol. , 71 ( 13 ) : 1535 – 1542 .
   Google Scholar
• Potschke , P , Bhattacharyya1 , AR and Janke , A . 2003 . Morphology and electrical resistivity of melt mixed blends of polyethylene and carbon nanotube filled polycarbonate . Polymer. , 44 : 8061 – 8069 .
   Web of Science ®Google Scholar
• McNallya , T , Potschkeb , P , Halleyc , P , Murphyc , M , Martinc , D , Belld , SEJ , Brennane , GP , Beinf , D , Lemoineg , P and Quinng , JP . 2005 . Polyethylene multiwalled carbon nanotube composites . Polymer. , 46 : 8222 – 8232 .
   Web of Science ®Google Scholar
• Sharples , A . 1996 . Introduction to polymer crystallization , New York , NY : St. Martin’s Press .
   Google Scholar
• Fourche , G . 1995 . An overview of the basic aspects of polymer adhesion . Part I: Fundamentals. Polym. Eng. Sci. , 35 : 957 – 967 .
   Web of Science ®Google Scholar
• Awaja , F , Gilbert , M , Kelly , G , Fox , B and Pigram , PJ . 2009 . Adhesion of polymers . Prog. Polym. Sci. , 34 : 948 – 968 .
   Web of Science ®Google Scholar
• Baldan , A . 2012 . Adhesion phenomena in bonded joints . Int. J. Adhes. Adhes. , 38 : 95 – 116 .
   Web of Science ®Google Scholar
• Rousset , F , Bourgin , P and Palade , L . 2006 . Plane poiseuille flow of two compatible polymers: influence of the interphase on the flow stability . J. Fluid Eng. -T ASME , 128 : 27 – 33 .
   Google Scholar
• Rousset , F , Bourgin , P and Palade , L . 2005 . Improvement of the properties of multilayer coextruded films by control of the interphase characteristics . J. Adv. Sci. , 17 : 17 – 21 .
   Google Scholar
• Kim , S and Suh , N . 1986 . Performance prediction of weldline structure in amorphous polymers . Polym. Eng. Sci. , 26 : 1200 – 1207 .
   Web of Science ®Google Scholar
• Chang , TC and Faison , E . 1999 . III Optimization of weld line quality in injection molding using an experimental design approach . J. Inj. Molding Technol. , 3 : 61 – 66 .
   Google Scholar
• Candal , MV , Gordillo , A , Santana , OO and Sanchez , JJ . 2008 . Study of the adhesion strength on overmolded plastic materials using the essential work of interfacial fracture (EWIF) concept . J. Mater. Sci. , 43 : 5052 – 5060 .
   Web of Science ®Google Scholar
• Rossa-Sierra , A , Sanchez-Soto , M , Illescas , S and Maspoch , ML . 2009 . Study on the interface behavoiuor between MABS/TPU bi-layer structures obtained through over molding . Mater. Des. , 30 : 3979 – 3988 .
   Google Scholar
• Lee , WJ , Lee , SE and Kim , CG . 2006 . The mechanical properties of MWNT/PMMA nanocomposites fabricated by modified injection molding . Compos. Struct. , 76 : 406 – 410 .
   Web of Science ®Google Scholar
• Xiao , KQ , Zhang , LC and Zarudi , I . 2007 . Mechanical and rheological properties of carbon nanotube-reinforced polyethylene composites . Compos. Sci. Technol. , 67 : 177 – 182 .
   Web of Science ®Google Scholar
• Pegel , S , Potschke , P , Petzold , G , Alig , I , Dudkin , SM and Lellinger , D . 2008 . Dispersion, agglomeration, and network formation of multiwalled carbon nanotubes in polycarbonate melts . Polymer , 49 : 974 – 984 .
   Web of Science ®Google Scholar
• Liang , S , Wan , K , Chen , D , Zhang , Q , Du , R and Fu , Q . 2008 . Shear enhanced interfacial interaction between carbon nanotubes and polyethylene and formation of nanohybrid shish–kebabs . Polymer , 49 : 4925 – 4929 .
   Google Scholar
• Villmow , T , Pegel , S , Potschke , P and Wagenknecht , U . 2008 . Influence of injection molding parameters on the electrical resistivity of polycarbonate filled with multi-walled carbon nanotubes . Compos. Sci. Technol. , 68 : 777 – 789 .
   Web of Science ®Google Scholar
• Thiébaud , F and Gelin , JC . 2009 . Multiwalled carbon nanotube/polypropylene composites: investigation of the melt processing by injection molding and analysis of the resulting mechanical behaviour . Int. J. Mater. Form. , 2 : 149 – 152 .
   Google Scholar
• Yang , J , Wang , K , Deng , H , Chen , F and Fu , Q . 2010 . Hierarchical structure of injection-molded bars of HDPE/MWCNTs composites with novel nanohybrid shish–kebab . Polymer , 51 : 774 – 782 .
   Web of Science ®Google Scholar
• Fetecau , C , Stan , F , Dobrea , D and Birsan , C . 2011 . Influence of injection molding parameters on mechanical properties of low density polyethylene filled with multiwalled carbon nanotubes . ASME Conf. Proc. , 8 : 599 – 605 .
   Google Scholar
• Agassant JF, Avenas P, Sergent JP, Carreau PJ. Polymer processing: principles & modelling. Munich: Carl Hanser Verlag; 1991.
   Google Scholar
• Voyutskii , SS and Vakula , VL . 1963 . The role of diffusion phenomena in polymer-to-polymer adhesion . J. Appl. Polym. Sci. , 7 : 475 – 491 .
   Google Scholar
• Wool , RP and Kim , YH . 1983 . A theory of healing at a polymer-polymer interface . Macromolecules. , 16 : 1115 – 1120 .
   Google Scholar
• Krausch , HH and Tirrell , M . 1989 . Polymer interdiffusion . Annu. Rev. Mater. Sci. , 19 : 341 – 377 .
   Google Scholar
• Mueller , C , Capaccio , G , Hiltner , A and Baer , E . 1998 . Heat Sealing of LLDPE: relationship to melting and interdiffusion . J. Appl. Polym. Sci. , 70 : 2021 – 2030 .
   Web of Science ®Google Scholar
• Roy , RK. 2011 . Design of experiments using the Taguchi A roach: 16 steps to product and process improvement , New York , NY : John Wiley & Sons .
   Google Scholar
• Zhang , C , Mizutani , T , Kaneko , K , Mori , T and Ishioka , M . 2002 . Space charge behaviors of low-density polyethylene blended with polypropylene copolymer . Polymer. , 43 : 2261 – 2266 .
   Google Scholar