Properties of liquefied wood modified melamine-formaldehyde (MF) resin adhesive and its application for bonding particleboards

References

• Pizzi A, Mittal KL. Handbook of adhesive technology. New York (NY): Marcel Dekker; 2003.
   Google Scholar
• Šernek M, Dunky M, Pizzi A. Hardening and gelling behaviour of adhesives and resins – monitoring of the thermosetting adhesive cure process. In: Dunky M, editor. Bonding of timber: core document of the COST action E34. Wien: Universität für Bodenkultur Wien; 2008. p. 163–169.
   Google Scholar
• Hagstrand PO, Klason C, Svensson L, Lundmark S. Rheokinetical behavior of melamine-formaldehyde resins. Polym. Eng. Sci. 1999;39:2019–2029.10.1002/(ISSN)1548-2634
   Web of Science ®Google Scholar
• Xing C, Zhang SY, Deng J, Wang S. Urea-formaldehyde-resin gel time as affected by the pH value, solid content, and catalyst. J. Appl. Polym. Sci. 2007;103:1566–1569.10.1002/(ISSN)1097-4628
   Web of Science ®Google Scholar
• No BY, Kim MG. Evaluation of melamine-modified urea-formaldehyde resins as particleboard binders. J. Appl. Polym. Sci. 2007;106:4148–4156.
   Web of Science ®Google Scholar
• Moslemi AA. Particleboard. Volume 1: materials. Carbondale (IL): Southern Illinois University press; 1974.
   Google Scholar
• Kollmann FFP, Kuenzi EW, Stamm AJ. Principles of wood science and technology. Volume II: wood based materials. Berlin, Heidelberg, New York: Springer-Verlag; 1975.
   Google Scholar
• Dunky M. Urea-formaldehyde (UF) adhesive resins for wood. Int. J. Adhes. Adhes. 1998;18:95–107.10.1016/S0143-7496(97)00054-7
   Web of Science ®Google Scholar
• Despres A, Pizzi A, Vu C, Delmotte L. Colourless formaldehyde-free urea resin adhesives for wood panels. Eur. J. Wood Prod. 2010;68:13–20.10.1007/s00107-009-0344-y
   Web of Science ®Google Scholar
• Pizzi A, Tekely P, Panamgama LA. A different approach to low formaldehyde emission aminoplastic wood adhesives. Holzforschung. 1996;50:481–485.10.1515/hfsg.1996.50.5.481
   Web of Science ®Google Scholar
• Tohmura SI, Li GY, Qin TF. Preparation and characterization of wood polyalcohol-based isocyanate adhesives. J. Appl. Polym. Sci. 2005;98:791–795.10.1002/(ISSN)1097-4628
   Web of Science ®Google Scholar
• Wei Y, Cheng F, Li H, Yu J. Synthesis and properties of polyurethane resins based on liquefied wood. J. Appl. Polym. Sci. 2004;92:351–356.10.1002/(ISSN)1097-4628
   Web of Science ®Google Scholar
• Kishi H, Fujita A, Miyazaki H, Matsuda S, Murakami A. Synthesis of wood-based epoxy resins and their mechanical and adhesive properties. J. Appl. Polym. Sci. 2006;102:2285–2292.10.1002/(ISSN)1097-4628
   Web of Science ®Google Scholar
• Alma MH, Basturk MA. Liquefaction of grapevine cane (Vitis vinisera L.) waste and its application to phenol-formaldehyde type adhesive. Ind. Crops Prod. 2006;24:171–176.10.1016/j.indcrop.2006.03.010
   Web of Science ®Google Scholar
• Fu S, Ma L, Li W, Cheng S. Liquefaction of bamboo, preparation of liquefied bamboo adhesives, and properties of the adhesives. Front. For. China. 2006;1:219–224.10.1007/s11461-006-0005-9
   Google Scholar
• Lee WJ, Liu Cheng-Tzu. Preparation of liquefied bark-based resol resin and its application to particle board. J. Appl. Polym. Sci. 2003;87:1837–1841.10.1002/(ISSN)1097-4628
   Web of Science ®Google Scholar
• Ugovšek A, Sernek M. Effect of pressing parameters on the shear strength of beech specimens bonded with low solvent liquefied wood. J. Adhes. Sci. Technol. 2013;27:182–195.10.1080/01694243.2012.701529
   Web of Science ®Google Scholar
• Tohmura SI, Hse CY, Higuchi M. Formaldehyde emission and high-temperature stability of cured urea-formaldehyde resins. J. Wood Sci. 2000;46:303–309.10.1007/BF00766221
   Web of Science ®Google Scholar
• Migneault S, Koubaa A, Riedl B, Nadji H, Deng J, Zhang T. Potential of pulp and paper sludge as a formaldehyde scavenger agent in MDF resins. Holzforschung. 2011;65:403–409.
   Web of Science ®Google Scholar
• Uchiyama S, Matsushima E, Kitao N, Tokunaga H, Ando M, Otsubo Y. Effect of natural compounds on reducing formaldehyde emission from plywood. Atmos. Environ. 2007;41:8825–8830.10.1016/j.atmosenv.2007.09.046
   Web of Science ®Google Scholar
• Wolcott JJ, Motter WK, Daisy NK, Tenhaeff SC, Detlefsen WD. Investigation of variables affecting hot-press formaldehyde and methanol emissions during laboratory production of urea-formaldehyde-bonded particleboard. Forest Prod. J. 1996;46:62–68.
   Web of Science ®Google Scholar
• Čuk N, Kunaver M, Medved S. Properties of particleboards made by using an adhesive with added liquefied wood. Mater. Technol. 2011;45:63–67.
   Google Scholar
• Kunaver M, Medved S, Čuk N, Jasiukaitytė E, Poljanšek I, Strnad T. Application of liquefied wood as a new particle board adhesive system. Bioresour. Technol. 2010;101:1361–1368.10.1016/j.biortech.2009.09.066
   PubMed Web of Science ®Google Scholar
• EN 323. Wood-based panels – determination of density. London: British Standard Institution; 1993. p. 12.
   Google Scholar
• EN 310. Wood-based panels – determination of modulus of elasticity in bending and of bending strength. London: British Standard Institution; 1993. p. 16.
   Google Scholar
• EN 319. Particleboards and fibreboards – determination of tensile strength perpendicular to the plane of the board. London: British Standard Institution; 1993. p. 12.
   Google Scholar
• EN 311. Wood-based panels – surface soundness – test method. London: British Standard Institution; 2002. p. 12.
   Google Scholar
• EN 317. Particleboards and fibreboards – determination of swelling in thickness after immersion in water. London: British Standard Institution; 1993. p. 12.
   Google Scholar
• EN 120. Wood-based panels – determination of formaldehyde content – extraction method called perforator method. London: British Standard Institution; 1992. p. 18.
   Google Scholar
• Xing C, Zhang SY, Deng J. Effect of wood acidity and catalyst on UF resin gel time. Holzforschung 2004;58:408–412.
   Web of Science ®Google Scholar
• Wang XM, Riedl B, Christiansen AW, Geimer RL. Differential scanning calorimetry of the effects of temperature and humidity on phenol-formaldehyde resin cure. Polymer 1994;35:5685–5692.10.1016/S0032-3861(05)80042-4
   Web of Science ®Google Scholar
• Xing C, Deng J, Zhang SY, Riedl B, Cloutier A. Differential scanning calorimetry characterization of urea-formaldehyde resin curing behavior as affected by less desirable wood material and catalyst content. J. Appl. Polym. Sci. 2005;98:2027–2032.10.1002/(ISSN)1097-4628
   Web of Science ®Google Scholar
• Medved S, Šega B, Kunaver M, Šernek M. Liquefied wood as formaldehyde scavenger for wood-based panels. In: Spear M, editor. Proceedings of the international panel products symposium 2009; 2009 Sept 16–18; Nantes (France). Bangor: BioComposite Centre.
   Google Scholar
• Gao Z, Wang XM, Wan H, Liu ZM. DSC characterisation of urea‐formaldehyde (UF) resin curing. Pigm. Adhes. Technol. 2009;38:3–9.10.1108/03699420910923526
   Web of Science ®Google Scholar
• Poljanšek I, Likozar B, Čuk N, Kunaver M. Curing kinetics study of melamine–urea–formaldehyde resin/liquefied wood. J. Wood Sci. Technol. 2013;47:395–409.10.1007/s00226-012-0503-x
   Web of Science ®Google Scholar
• Anderson IH, Cawley M, Steedman W. Melamine-formaldehyde resins, II.*- Thermal degradation of model compounds and resins. Br. Polym. J. 1971;3:86–92.
   Google Scholar
• Siimer K, Kaljuvee T, Christjanson P. Thermal behaviour of urea-formaldehyde resins during curing. J. Therm. Anal. Calorim. 2003;72:607–617.10.1023/A:1024590019244
   Web of Science ®Google Scholar
• Doh GH, Lee SY, Kang IA, Kong YT. Thermal behavior of liquefied wood polymer composites (LWPC). Compos. Struct. 2005;68:103–108.10.1016/j.compstruct.2004.03.004
   Web of Science ®Google Scholar