Efficacy of uncommon surface treatment methods on titanium in order to improve bond strengths for adhesive cementation

References

• Fonseca RG, Haneda IG, Almeida-Júnior AA, et al. Efficacy of air-abrasion technique and additional surface treatment at titanium/resin cement interface. J. Adhes. Dent. 2012;14:453–459.
   PubMed Web of Science ®Google Scholar
• Rosenstiel SF, Land MF, Fujimoto J. Contemporary fixed prosthodontics. 4th ed. St. Louis: Mosby Elsevier; 2006, p. 226–30, 915–7.
   Google Scholar
• Nakakuki de Campos T, Adachi LK, Yoshida H, et al. Effect of surface topography of implant abutments on retention of cemented single-tooth crowns. Int. J. Periodontics Restor. Dent. 2010;30:409–413.
   PubMed Web of Science ®Google Scholar
• Kim Y, Yamashita J, Shotwell JL, et al. The comparison of provisional luting agents and abutment surface roughness on the retention of provisional implant-supported crowns. J. Prosthet. Dent. 2006;95:450–455.10.1016/j.prosdent.2006.03.020
   PubMed Web of Science ®Google Scholar
• Osman SA, Walls AWG, McCabe JF. Crown retention for non-retentive preparations using adhesive resin cements. Eur. J. Prosthodont. Restor. Dent. 2010;18:155–157.
   PubMedGoogle Scholar
• Goodacre CJ, Campagni WV, Aquilino SA. Tooth preparations for complete crowns: an art form based on scientific principles. J. Prosthet. Dent. 2001;85:363–376.10.1067/mpr.2001.114685
   PubMed Web of Science ®Google Scholar
• Amarnath GS, Pandey A, Prasad HA, et al. Comparative evaluation on enhancing retention of dislodged crowns using preparation modifications and luting cements: An in vitro study. J. Int. Oral Health. 2015;7:47–51.
   PubMedGoogle Scholar
• Mitchell CA, Abbariki M, Orr JF. The influence of luting cement on the probabilities of survival and modes of failure of cast full-coverage crowns. Dent. Mater. 2000;16:198–206.10.1016/S0109-5641(00)00009-9
   PubMed Web of Science ®Google Scholar
• Zidan O, Ferguson GC. The retention of complete crowns prepared with three different tapers and luted with four different cements. J. Prosthet. Dent. 2003;89:565–571.10.1016/S0022-3913(03)00182-3
   PubMed Web of Science ®Google Scholar
• Attar N, Tam LE, McComb D. Mechanical and physical properties of contemporary dental luting agents. J. Prosthet. Dent. 2003;89:127–134.10.1067/mpr.2003.20
   PubMed Web of Science ®Google Scholar
• Tsuchimoto Y, Yoshida Y, Takeuchi M, et al. Effect of surface pre-treatment on durability of resin-based cements bonded to titanium. Dent. Mater. 2006;22:545–552.10.1016/j.dental.2005.08.002
   PubMed Web of Science ®Google Scholar
• Almilhatti HJ, Neppelenbroek KH, Vergani CE, et al. Adhesive bonding of resin composite to various titanium surfaces using different metal conditioners and a surface modification system. J. Appl. Oral. Sci. 2013;21:590–596.
   PubMed Web of Science ®Google Scholar
• Abi-Rached FdeO, Fonseca RG, Haneda IG, et al. The effect of different surface treatments on the shear bond strength of luting cements to titanium. J. Prosthet. Dent. 2012;108:370–376.10.1016/S0022-3913(12)60194-2
   PubMed Web of Science ®Google Scholar
• Nishigawa G, Maruo Y, Irie M, et al. Various effects of sandblasting of dental restorative materials. PLoS ONE. 2016;11:1–10.
   Web of Science ®Google Scholar
• Fukuyama T, Hamano N, Ino S. Effects of silica-coating on surface topography and bond strength of porcelain fused to CAD/CAM pure titanium. Dent. Mater. J. 2016;35:325–332.10.4012/dmj.2015-290
   PubMedGoogle Scholar
• Papadopoulos T, Tsetsekou A, Eliades G. Effect of aluminium oxide sandblasting on cast commercially pure titanium surfaces. Eur. J. Prosthodont. Restor. Dent. 1999;7:15–21.
   PubMedGoogle Scholar
• Bulbul M, Kesim B. The effect of primers on shear bond strength of acrylic resins to different types of metals. J. Prosthet. Dent. 2010;103:303–308.10.1016/S0022-3913(10)60063-7
   PubMed Web of Science ®Google Scholar
• Sarafianou A, Seimenis I, Papadopoulos T. Effectiveness of different adhesive primers on the bond strength between an indirect composite resin and a base metal alloy. J. Prosthet. Dent. 2008;99:377–387.10.1016/S0022-3913(08)60086-4
   PubMed Web of Science ®Google Scholar
• Tsuchımoto Y, Yoshıda Y, Mıne A, et al. Effect of 4-MET- and 10-MDP-based primers on resin bonding to titanium. Dent. Mater. J. 2006;25:120–124.10.4012/dmj.25.120
   PubMed Web of Science ®Google Scholar
• Matinlinna JP, Lassila LVJ, Vallittu PK. Evaluation of five dental silanes on bonding a luting cement onto silica-coated titanium. J. Dent. 2006;34:721–726.10.1016/j.jdent.2006.01.005
   PubMed Web of Science ®Google Scholar
• Matinlinna JP, Lassila LVJ, Vallittu PK. The effect of five silane coupling agents on the bond strength of a luting cement to a silica-coated titanium. Dent. Mater. 2007;23:1173–1180.10.1016/j.dental.2006.06.052
   PubMed Web of Science ®Google Scholar
• Radhi A, Juszczyk AS, Curtis RV, et al. Effect of GC METALPRIMER II on bond strength of heat-cured acrylic resin to titanium alloy (Ti-Al-4 V) with two different surface treatments. Eur.J. Prosthodont. Restor. Dent. 2008;16:132–137.
   PubMedGoogle Scholar
• Di Francescantonio M, Oliveira MT, Daroz LGD, et al. Adhesive bonding of resin cements to cast titanium with adhesive primers. Braz. Dent. J. 2012;23:218–222.10.1590/S0103-64402012000300006
   PubMedGoogle Scholar
• Atsu SS, Kilicarslan MA, Kucukesmen HC, et al. Effect of zirconium-oxide ceramic surface treatments on the bond strength to adhesive resin. J. Prosthet. Dent. 2006;95:430–436.10.1016/j.prosdent.2006.03.016
   PubMed Web of Science ®Google Scholar
• Özcan M. The use of chairside silica coating for different dental applications: a clinical report. J. Prosthet. Dent. 2002;87:469–472.10.1067/mpr.2002.124365
   PubMed Web of Science ®Google Scholar
• Fonseca RG, Martins SB, de Oliveira Abi-Rached F, et al. Effect of different airborne-particle abrasion/bonding agent combinations on the bond strength of a resin cement to a base metal alloy. J. Prosthet. Dent. 2012;108:316–323.10.1016/S0022-3913(12)60185-1
   PubMed Web of Science ®Google Scholar
• Watanabe T, Ino S, Okada S, et al. Influence of simplified silica coating method on the bonding strength of resin cement to dental alloy. Dent. Mater. J. 2008;27:16–20.10.4012/dmj.27.16
   PubMed Web of Science ®Google Scholar
• Elsaka SE. Effect of surface pretreatments on the bonding strength and durability of self-adhesive resin cements to machined titanium. J. Prosthet. Dent. 2013;109:113–120.10.1016/S0022-3913(13)60026-8
   PubMed Web of Science ®Google Scholar
• Akin H, Guney U. Effect of various surface treatments on the retention properties of titanium to implant restorative cement. Lasers Med. Sci. 2012;27:1183–1187.10.1007/s10103-011-1026-7
   PubMed Web of Science ®Google Scholar
• Kim JT, Cho SA. The effects of laser etching on shear bond strength at the titanium ceramic interface. J. Prosthet. Dent. 2009;101:101–106.10.1016/S0022-3913(09)60002-0
   PubMed Web of Science ®Google Scholar
• Anusavice KJ. Phillips’ science of dental materials. 1st ed. St. Louis (MO): W.B. Saunders; 2003. p. 579–580.
   Google Scholar
• Kirmanidou Y, Sidira M, Drosou ME, et al. New Ti-alloys and surface modifications to improve the mechanical properties and the biological response to orthopedic and dental implants: a review. BioMed Res. Int. 2016;2016:1–21.10.1155/2016/2908570
   Web of Science ®Google Scholar
• Wang RR, Fenton A. Titanium for prosthodontics applications: a review of the literature. Quintessence Int. 1996;27:401–408.
   PubMedGoogle Scholar
• Kedici SP, Aksüt AA, Kílíçarslan MA, et al. Corrosion behaviour of dental metals and alloys in different media. J. Oral Rehabil. 1998;25:800–808.10.1046/j.1365-2842.1998.00305.x
   PubMed Web of Science ®Google Scholar
• Cai Z, Shafer T, Watanabe I, et al. Electrochemical characterization of cast titanium alloys. Biomaterials. 2003;24:213–218.10.1016/S0142-9612(02)00293-4
   PubMed Web of Science ®Google Scholar
• Takahashı M, Kıkuchı M, Takada Y. Mechanical properties of dental Ti–Ag alloys with 22.5, 25, 27.5 and 30 mass% Ag. Dent. Mater. J. 2015;34:503–507.10.4012/dmj.2015-075
   PubMed Web of Science ®Google Scholar
• Lorey RE, Edge MJ, Lang BR, et al. The potential for bonding titanium restorations. J. Prosthodont. 1993;2:151–155.10.1111/jopr.1993.2.issue-3
   PubMedGoogle Scholar
• Ozcan M, Pfeiffer P, Nergiz I. A brief history and current status of metal-and ceramic surface-conditioning concepts for resin bonding in dentistry. Quintessence Int. 1998;29:713–724.
   PubMed Web of Science ®Google Scholar
• Poulon-Quintin A, Watanabe I, Watanabe E, et al. Microstructure and mechanical properties of surface treated cast titanium with Nd:YAG laser. Dent. Mater. 2012;28:945–951.10.1016/j.dental.2012.04.008
   PubMed Web of Science ®Google Scholar
• Miragaya L, Maia LC, Sabrosa CE, et al. Evaluation of self-adhesive resin cement bond strength to yttria-stabilized zirconia ceramic (Y-TZP) using four surface treatments. J. Adhes. Dent. 2011;13:473–480.
   PubMed Web of Science ®Google Scholar
• İnan Özgür, Acar A, Halkacı S. Effects of sandblasting and electrical discharge machining on porcelain adherence to cast and machined commercially pure titanium. J. Biomed. Mater. Res. Part B: Appl. Biomater. 2006;78B:393–400.10.1002/(ISSN)1552-4981
   Web of Science ®Google Scholar
• International Organization for Standardization. Dentistry-polymer-based crown and bridge materials. ISO 10477:2004. Geneva, Switzerland: International Organization for Standardization. Available from http://www.iso.org/iso/store.htm.
   Google Scholar
• Matsumura H, Yanagida H, Tanoue N, et al. Shear bond strength of resin composite veneering material to gold alloy with varying metal surface preparations. J. Prosthet. Dent. 2001;86:315–319.10.1067/mpr.2001.114823
   PubMed Web of Science ®Google Scholar
• Watanabe I, Kurtz KS, Kabcenell JL, et al. Effect of sandblasting and silicoating on bond strength of polymer-glass composite to cast titanium. J. Prosthet. Dent. 1999;82:462–467.10.1016/S0022-3913(99)70035-1
   PubMed Web of Science ®Google Scholar
• Petridis H, Garefis P, Hirayama H, et al. Bonding indirect resin composites to metal: part 2. Effect of alloy surface treatment on elemental composition of alloy and bond strength. Int. J. Prosthodont. 2004;17:77–82.
   PubMed Web of Science ®Google Scholar
• Seker E, Kilicarslan MA, Deniz ST, et al. Effect of atmospheric plasma versus conventional surface treatments on the adhesion capability between self-adhesive resin cement and titanium surface. J. Adv. Prosthodont. 2015;7:249–256.10.4047/jap.2015.7.3.249
   PubMed Web of Science ®Google Scholar
• Watanabe T, Ino S, Okada S, et al. Influence of simplified silica coating method on the bonding strength of resin cement to dental alloy. Dent. Mater. J. 2008;27:16–20.10.4012/dmj.27.16
   PubMed Web of Science ®Google Scholar
• Cobb DS, Vargas MA, Fridrich TA, et al. Metal surface treatment: characterization and effect on composite-to-metal bond strength. Oper. Dent. 2000;25:427–433.
   PubMed Web of Science ®Google Scholar
• Almeida-Júnior AA, Fonseca RG, Haneda IG, et al. Effect of surface treatments on the bond strength of a resin cement to commercially pure titanium. Braz. Dent. J. 2010;21:111–116.
   PubMedGoogle Scholar
• Cho SA, Jung SK. A removal torque of the laser-treated titanium implants in rabbit tibia. Biomaterials. 2003;24:4859–4863.10.1016/S0142-9612(03)00377-6
   PubMed Web of Science ®Google Scholar
• Egoshi T, Taira Y, Soeno K, et al. Effect of sandblasting, H2SO4/HCl etching, and phosphate primer application on bond strength of veneering resin composite to commercially pure titanium grade 4. Dent. Mater. J. 2013;32:219–227.
   Google Scholar
• Elsaka SE, Swain MV. Effect of surface treatments on adhesion of self-adhesive resin cements to titanium. J. Adhes. Dent. 2013;15:65–71.
   PubMed Web of Science ®Google Scholar