References
- He P, Huang M, Fisher S, et al. Effects of primer and annealing treatment on the shear strength between anodized Ti6Al4V and epoxy. Int. J. Adhes. Adhes. 2015;57:49–56.10.1016/j.ijadhadh.2014.10.004
- Baldan A. Adhesively-bonded joints and repairs in metallic alloys, polymers and composite materials: adhesives, adhesion theories and surface pretreatment. J. Mater. Sci. 2004;39:1–49.10.1023/B:JMSC.0000007726.58758.e4
- Harris AF, Beevers A. The effect of grit-blasting on the surface properties for adhesion. Int. J. Adhes. Adhes. 1999;19:445–452.10.1016/S0143-7496(98)00061-X
- Gallant D, Savard V. New adhesive bonding surface treatment technologies for lightweight aluminum-polypropylene hybrid joints in semi-structural applications. SAE Int. J. Mater. Manuf. 2011;4:314–327. doi:10.4271/2011-01-0217.
- Assefpour-Dezfuly M, Vlachos C, Andrews EH. Oxide morphology and adhesive bonding on titanium surfaces. J. Mater. Sci. 1984;19:3626–3639.10.1007/BF02396935
- Prolongo SG, Ureña A. Effect of surface pre-treatment on the adhesive strength of epoxy-aluminium joints. Int. J. Adhes. Adhes. 2009;29:23–31.10.1016/j.ijadhadh.2008.01.001
- da Silva LFM, Carbas RJC, Critchlow GW, et al. Effect of material, geometry, surface treatment and environment on the shear strength of single lap joints. Int. J. Adhes. Adhes. 2009;29:621–632.10.1016/j.ijadhadh.2009.02.012
- Molitor P, Barron V, Young T. Surface treatment of titanium for adhesive bonding to polymer composites: a review. Int. J. Adhes. Adhes. 2001;21:129–136.10.1016/S0143-7496(00)00044-0
- Bouquet F, Cuntz JM, Coddet C. Influence of surface treatment on the durability of stainless steel sheets bonded with epoxy. J. Adhes. Sci. Technol. 1992;6:233–242.10.1163/156856192X00304
- Rechner R, Jansen I, Beyer E. Influence on the strength and aging resistance of aluminium joints by laser pre-treatment and surface modification. Int. J. Adhes. Adhes. 2010;30:595–601.10.1016/j.ijadhadh.2010.05.009
- Bockenheimer C, Valeske B, Possart W. Network structure in epoxy aluminium bond after mechanical treatment. Int. J. Adhes. Adhes. 2002;22:349–356.10.1016/S0143-7496(02)00014-3
- Adams RD Adhesive boding. Science, technology and applications. Woodhead Publishing Limited; 2010.
- Adams RD, Comyn J, Wake WC. Structural adhesive joints in engineering book. Springer; 1997.
- Islam MS, Tong L, Falzon PJ. Influence of metal surface preparation on its surface profile, contact angle, surface energy and adhesion with glass fibre prepreg. Int. J. Adhes. Adhes. 2014;51:32–41.10.1016/j.ijadhadh.2014.02.006
- Rudawska A. Selected aspects of the effect of mechanical treatment on surface roughness and adhesive joint strength of steel sheets. Int. J. Adhes. Adhes. 2014;50:235–243.10.1016/j.ijadhadh.2014.01.032
- Rudawska A. Surface free energy and 7075 aluminium bonded joints strength following degreasing only and without any prior treatment. J. Adhes. Sci. Technol. 2012;26:1233–1247.
- Critchlow GW, Brewis DM. Review of surface pretreatments for aluminum alloys. Int. J. Adhes. Adhes. 1996;16:255–275.10.1016/S0143-7496(96)00014-0
- Uehara K, Mitsuru S. Bonding strength of adhesives and surfaces roughness of joined parts. J. Mater. Process. Technol. 2002;127:178–181.10.1016/S0924-0136(02)00122-X
- Ebnesajjad S, Ebnesajjad C. Surface treatment of materials for adhesive bonding. 2nd ed. Norwich: William Andrew; 2013.
- Rotella G, Alfano M, Schiefer T, et al. Evaluation of mechanical and laser surface pre-treatments on the strength of adhesive bonded steel joints for automotive industry. J. Adhes. Sci. Technol. 2016;30:747–758.10.1080/01694243.2015.1123559
- Bhatt BD, Radhakrishnan V. Evaluation of some machining process as adherend surface treatments in bonding aluminium. J. Adhes. Sci. Technol. 1989;3:383–396.10.1163/156856189X00281
- Kumosa L, Armentrout D, Kumosa D. The effect of sandblasting on the initiation of stress corrosion cracking in unidirectional E-glass/polymer composites used in high voltage composite (non-ceramic) insulators. Compos. Sci. Technol. 2002;62:1999–2015.10.1016/S0266-3538(02)00143-4
- Hass P, Kläusler O, Schlegel S, et al. Effects of mechanical and chemical surface preparation on adhesively bonded wooden joints. Int. J. Adhes. Adhes. 2014;51:95–102.10.1016/j.ijadhadh.2014.02.014
- Brack N, Rider AN. The influence of mechanical and chemical treatments on the environmental resistance of epoxy adhesive bonds to titanium. Int. J. Adhes. Adhes. 2014;44:20–27.10.1016/j.ijadhadh.2013.09.012
- Shahid M, Hashim SA. Effect of surface roughness on the strength of cleavage joint. Int. J. Adhes. Adhes. 2002;22:235–244.10.1016/S0143-7496(01)00059-8
- Critchlow GW, Webb PW, Tremlett CJ, et al. Chemical conversion coatings for structural adhesive bonding of plain carbon steels. Int. J. Adhes. Adhes. 2000;20:113–122.10.1016/S0143-7496(99)00036-6
- Aakkula J, Saarela O. Silane based field level surface treatment methods for aluminium, titanium and steel bonding. Int. J. Adhes. Adhes. 2014;48:268–279.10.1016/j.ijadhadh.2013.09.039
- Guedes Pinto AM, Magalhães AG, Gomes da Silva F, et al. Shear strength of adhesively bonded polyolefins with minimal surface preparation. Int. J. Adhes. Adhes. 2008;28:452–456.10.1016/j.ijadhadh.2008.04.003
- Hamndan S, Evans JRG. The surface treatment and adhesive bonding of polyetheretherketone. Part I. Adhesive joints strength. J. Adhes. Sci. Technol. 1987;1:281–289.10.1163/156856187X00292
- Rudawska A. Selected aspects of the effect of mechanical treatment on surface roughness and adhesive joints strength of steel sheets. Int. J. Adhes. Adhes. 2014;50:235–243.10.1016/j.ijadhadh.2014.01.032
- da Silva LFM, Ferreira NMAJ, Richter-Trummer V, et al. Effect of grooves on the strength of adhesively bonded joints. Int. J. Adhes. Adhes. 2010;30:735–743.10.1016/j.ijadhadh.2010.07.005
- http://ciechgroup.com/grupa-ciech.
- http://www.loctite.co.uk.
- DIN EN 1465. Adhesives. Determination of tensile lap-shear strength of bonded joints.
- EN ISO 10365. Adhesives – designation of main failure patterns.
- Rudawska A. Influence of the thickness of joined elements on lap length of aluminium alloy sheet bonded joints. Adv. Sci. Technol. Res. J. 2015;9:35–44.10.12913/22998624/59082
- PN-EN ISO 4288. Geometrical Product Specifications (GPS) – surface texture: profile method – rules and procedures for the assessment of surface texture. 2011.