Effects of different surface treatments of zirconia on the bond strength of self-adhesive resinous cement

References

• Rizkalla AS, Jones DW. Mechanical properties of commercial high strength ceramic core materials. Dent. Mater. 2004;20:207–212.10.1016/S0109-5641(03)00093-9
   PubMed Web of Science ®Google Scholar
• Sundh A, Sjogren G. Fracture resistance of all-ceramic zirconia bridges with differing phase stabilizers and quality of sintering. Dent. Mater. 2006;22:778–784.10.1016/j.dental.2005.11.006
   PubMed Web of Science ®Google Scholar
• Liu L, Liu S, Song X, et al. Effect of Nd: YAG laser irradiation on surface properties and bond strength of zirconia ceramics. Lasers Med. Sci. 2015;30:627–634. doi: 10.1007/s10103-013-1381-7
   PubMed Web of Science ®Google Scholar
• Zhang W, Masumi SI, Song XM. Bonding property of two resin-reinforced glass-ionomer cements to zirconia ceramic. Quintessence Int. 2010;41:e132–40.
   PubMed Web of Science ®Google Scholar
• Craciunescu E, Sinescu C, Negrutiu ML, et al. Shear bond strength tests of zirconia veneering ceramics after chipping repair. J. Adhes. Sci. Technol. 2016;30:666–676.10.1080/01694243.2015.1117304
   Web of Science ®Google Scholar
• Rosentritt M, Behr M, van der Zel JM, et al. Shear bond strength of cement to zirconia. J. Adhes. Sci. Technol. 2009;23:1125–1132.10.1163/156856109X432758
   Web of Science ®Google Scholar
• Piascik JR, Swift EJ, Thompson JY, et al. Surface modification for enhanced silanation of zirconia ceramics. Dent. Mater. 2009;25:1116–1121.10.1016/j.dental.2009.03.008
   PubMed Web of Science ®Google Scholar
• Kara HB, Ozturk AN, Aykent F, et al. The effect of different surface treatments on roughness and bond strength in low fusing ceramics. Lasers Med. Sci. 2011;26:599–604.10.1007/s10103-010-0806-9
   PubMed Web of Science ®Google Scholar
• Paranhos MP, Burnett LH Jr, Magne P. Effect Of Nd:YAG laser and CO2 laser treatment on the resin bond strength to zirconia ceramic. Quintessence Int. 2011;42:79–89.
   PubMed Web of Science ®Google Scholar
• Cavalcanti AN, Foxton RM, Watson TF, et al. Bond strength of resin cements to a zirconia ceramic with different surface treatments. Oper. Dent. 2009;34:280–287.10.2341/08-80
   PubMed Web of Science ®Google Scholar
• da Silveira BL, Paglia A, Burnett LH, et al. Micro-tensile bond strength between a resin cement and an aluminous ceramic treated with Nd:YAG laser, rocatec system, or aluminum oxide sandblasting. Photomed. Laser Surg. 2005;23:543–548.10.1089/pho.2005.23.543
   PubMed Web of Science ®Google Scholar
• Özcan M, Vallittu PK. Effect of surface conditioning methods on the bond strength of luting cement to ceramics. Dent. Mater. 2003;19:725–731.10.1016/S0109-5641(03)00019-8
   PubMed Web of Science ®Google Scholar
• Mahmoodi N, Hooshmand T, Heidari S, et al. Effect of sandblasting, silica coating, and laser treatment on the microtensile bond strength of a dental zirconia ceramic to resin cements. Lasers Med. Sci. 2016;31:205–211. Epub 2015 Dec 23.10.1007/s10103-015-1848-9
   PubMed Web of Science ®Google Scholar
• Liu L, Liu S, Song X, et al. Effect of Nd: YAG laser irradiation on surface properties and bond strength of zirconia ceramics. Lasers Med. Sci. 2015;30:627–634. Epub 2013 Jul 06.10.1007/s10103-013-1381-7
   PubMed Web of Science ®Google Scholar
• Yassini E, Tabari K. Comparison of shear bond strength between composite resin and porcelain using different bonding systems. J. Dent. 2005;2:1–6.
   Google Scholar
• Casucci A, Monticelli F, Goracci C, et al. Effect of surface pre-treatments on the zirconia ceramic-resin cement microtensile bond strength. Dent. Mater. 2011;27:1024–1030.10.1016/j.dental.2011.07.002
   PubMed Web of Science ®Google Scholar
• Valandro LF, Ozcan M, Bottino MC, et al. Bond strength of a resin cement to high-alumina and zirconia-reinforced ceramics: the effect of surface conditioning. J. Adhes. Dent. 2006;8:175–181.
   PubMed Web of Science ®Google Scholar
• Della Bona A, Donassollo TA, Demarco FF, et al. Characterization and surface treatment effects on topography of a glass-infiltrated alumina/zirconia-reinforced ceramic. Dent. Mater. 2007;23:769–775.10.1016/j.dental.2006.06.043
   PubMed Web of Science ®Google Scholar
• Tsukamoto R, Williams PA, Clarke IC, et al. Y-TZP zirconia run against highly crosslinked UHMWPE tibial inserts: knee simulator wear and phase-transformation studies. J. Biomed. Mater. Res. Part B: Appl. Biomater. 2008;86B:145–153.10.1002/(ISSN)1552-4981
   Web of Science ®Google Scholar
• Sarmento HR, Campos F, Sousa RS, et al. Influence of air-particle deposition protocols on the surface topography and adhesion of resin cement to zirconia. Acta Odontol. Scand. 2014;72:346–353. doi: 10.3109/00016357.2013.837958
   PubMed Web of Science ®Google Scholar
• Zhang Y, Lawn BR, Rekow ED, et al. Effect of sandblasting on the long-term performance of dental ceramics. J. Biomed. Mater. Res. 2004;71B:381–386.10.1002/(ISSN)1097-4636
   Web of Science ®Google Scholar
• Liu D, Matinlinna JP, Tsoi JK, et al. A new modified laser pretreatment for porcelain zirconia bonding. Dent. Mater. 2013;29:559–565.10.1016/j.dental.2013.03.002
   PubMed Web of Science ®Google Scholar
• Burke FJ, Crisp RJ, Cowan AJ, et al. Five-year clinical evaluation of zirconia-based bridges in patients in UK general dental practices. J. Dent. 2013;41:992–999.10.1016/j.jdent.2013.08.007
   PubMed Web of Science ®Google Scholar
• Aleisa KI, Almufleh BS, Morgano SM, et al. Effect of types of luting agent on push-out bond strength of zirconium oxide posts. J. Dent. 2013;41:377–383.10.1016/j.jdent.2013.01.011
   PubMed Web of Science ®Google Scholar
• Ural C, Kulunk T, Kulunk S, et al. The effect of laser treatment on bonding between zirconia ceramic surface and resin cement. Acta Odontol. Scand. 2010;68:354–359.10.3109/00016357.2010.514720
   PubMed Web of Science ®Google Scholar
• Kirmali O, Kapdan A, Kustarci A, et al. Veneer ceramic to Y-TZP bonding: comparison of different surface treatments. J. Prosthodont. 2015. Epub 2015 May 23. doi: 10.1111/jopr.12304
   Google Scholar
• Luthy H, Loeffel O, Hammerle CH. Effect of thermocycling on bond strength of luting cements to zirconia ceramic. Dent. Mater. 2006;22:195–200.10.1016/j.dental.2005.04.016
   PubMed Web of Science ®Google Scholar
• Sasse M, Kern M. CAD/CAM single retainer zirconia-ceramic resin-bonded fixed dental prostheses: clinical outcome after 5 years. Int. J. Comput. Dent. 2013;16:109–118.
   PubMed Web of Science ®Google Scholar
• Spohr AM, Borges GA, Júnior LH, et al. Surface modification of in-ceram zirconia ceramic by Nd:YAG laser, rocatec system, or aluminum oxide sandblasting and its bond strength to a resin cement. Photomed. Laser Surg. 2008;26:203–208. Epub 2008 Jul 01.10.1089/pho.2007.2130
   PubMed Web of Science ®Google Scholar
• Usumez A, Hamdemirci N, Koroglu BY, et al. Bond strength of resin cement to zirconia ceramic with different surface treatments. Lasers Med. Sci. 2013;28:259–266.
   PubMed Web of Science ®Google Scholar
• Yavuz T, Ozyilmaz OY, Dilber E, et al. Effect of different surface treatments on porcelain-resin bond strength. J. Prosthodont. 2015. Epub 2015 Oct 20. doi: 10.1111/jopr.12387
   Google Scholar
• Tanaka R, Fujishima A, Shibata Y, et al. Cooperation of phosphate monomer and silica modification on zirconia. J. Dent. Res. 2008;87:666–670.10.1177/154405910808700705
   PubMed Web of Science ®Google Scholar
• Kern M, Wegner SM. Bonding to zirconia ceramic: adhesion methods and their durability. Dent. Mater. 1998;14:64–71.10.1016/S0109-5641(98)00011-6
   PubMed Web of Science ®Google Scholar
• Gomes AL, Ramos JCSantos-Del Riego S, et al. Thermocycling effect on microshear bond strength to zirconia ceramic using Er: YAG and tribochemical silica coating as surface conditioning. Lasers Med. Sci. 2015;2:787–795.
   Google Scholar
• Subasi MG, Inan O. Influence of surface treatments and resin cement selection on bonding to zirconia. Lasers Med. Sci. 2014;1:19–27.
   Web of Science ®Google Scholar