References
- Auras R, Harte B, Selke S. An overview of polylactides as packing materials. Macromol Biosci. 2004;4:835–864.10.1002/(ISSN)1616-5195
- Cohn D, Salomon AH. Designing biodegradable multiblock PCL/PLA thermoplastic elastomers. Biomaterials. 2005;26:2297–2305.10.1016/j.biomaterials.2004.07.052
- Huda MS, Drzal LT, Mohanty AK, et al. Chopped glass and recycled newspaper as reinforcement fibers in injection molded poly(lactic acid) (PLA) composites: a comparative study. Compos Sci Technol. 2006;66:1813–1824.10.1016/j.compscitech.2005.10.015
- Lee SH, Wang S. Biodegradable polymers/bamboo fiber biocomposite with bio-based coupling agent. Compos Part A Appl Sci Manuf. 2006;37:80–91.10.1016/j.compositesa.2005.04.015
- Marcovich NE, Reboredo MM, Aranguren MI. Modified woodflour as thermoset fillers: II. thermal degradation of woodflours and composites. Thermochim Acta. 2001;372:45–57.10.1016/S0040-6031(01)00425-7
- Mohanty AK, Khan MA, Hinrichsen G. Surface modification of jute and its influence on performance of biodegradation jute-fabric/Bopol composites. Compos Sci Technol. 2006;60:1115–1124.
- Gomes A, Matsuo T, Goda K, et al. Development and effect of alkali treatment on tensile properties of curaua fiber green composites. Compos Part A Appl Sci Manuf. 2007;38:1811–1820.10.1016/j.compositesa.2007.04.010
- Punyamurthy R, Sampathkumar D, Srinivasa CV, et al. Effect of alkali treatment on water absorption of single cellulosic abaca fiber. BioResources. 2012;7:3515–3524.
- Owen NL, Thomas DM. Infrared studies of “hard” and “soft” woods. Appl Spectrosc. 1989;43:451–455.10.1366/0003702894202760
- Hosseinaei O, Wang S, Enayati AA, et al. Effects of hemicellulose extraction on properties of wood flour and wood-plastic composites. Compos Part A Appl Sci Manuf. 2012;43:686–694.10.1016/j.compositesa.2012.01.007
- Lu N, Swan RH, Ferguson I. Composition, structure and mechanical properties of hemp fiber reinforced composites with recycled high-density polyethylene matrix. J Compos Mater. 2011;46:1–11.
- Cai M, Takagi H, Nakagaito AN, et al. Influence of alkali treatment on internal microstructure and tensile properties of abaca fibers. Ind Crops Prod. 2015;65:27–35.10.1016/j.indcrop.2014.11.048
- EI-Shekeil YA, Sapuan SM, Khalina A, et al. Effect of alkali treatment on mechanical and thermal properties of Kenaf fiber-reinforced thermoplastic polyurethane composite. J Therm Anal Calorim. 2012; 109: 1435–1443.10.1007/s10973-012-2258-x
- Vonk CG. Computerization of Ruland’s X-ray method for determination of the crystallinity in polymers. J Appl Crystallogr. 1973;6:148–152.10.1107/S0021889873008332
- Nishiyama Y, Kuga S, Okano T. Mechanism of mercerization revealed by X-ray diffraction. J Wood Sci. 2000;46:452–457.10.1007/BF00765803
- Kazayawok M, Balatinecs JJ, Matuana LM. Surface modification and adhesion mechanisms in woodfiber-polypropylene composites. J Mater Sci. 1999;34:6189–6199.10.1023/A:1004790409158
- Hosseinaei O, Wang S, Rials TG, et al. Effects of decreasing carbohydrate content on properties of wood strands. Cellulose. 2011;18:841–850.10.1007/s10570-011-9519-x
- AIMaadeed MA, Kahraman R, Noorunnisa KP, et al. Data palm wood flour/glass fiber reinforced hybrid composites of recycled polypropylene: mechanical and thermal properties. Mater Des. 2012; 42: 289–294.10.1016/j.matdes.2012.05.055
- Liu L, Yu J, Cheng L, et al. Mechanical properties of poly (butylene succinate) (PBS) biocomposites reinforced with surface modified jute fibre. Compos Part A Appl Sci Manuf. 2009;40:669–674.10.1016/j.compositesa.2009.03.002
- Joseph PV, Rabello MS, Mattoso LHC, et al. Environmental effects on the degradation behavior of sisal fiber reinforced polypropylene composites. Compos Sci Technol. 2002;62:1357–1372.10.1016/S0266-3538(02)00080-5
- Shanmugam D, Thiruchitrambalam M. Static and dynamic mechanical properties of alkali treated unidirectional continuous Palmyra Palm Leaf Stalk Fiber/jute fiber reinforced hybrid polyester composites. Mater Des. 2013;50:533–542.10.1016/j.matdes.2013.03.048
- Song Y, Wang Q, Han G, et al. Effects of two modification methods on the mechanical properties of wood flour/recycled plastic blends composites: addition of thermoplastic elastomer SEBS-g-MAH and in situ grafting MAH. J For Res. 2010;21:373–378.10.1007/s11676-010-0084-1
- Saha AK, Das S, Bhatta D, et al. Study of jute fiber reinforced polyester composites by dynamic mechanical analysis. J Appl Polym Sci. 1999;71:1505–1513.10.1002/(ISSN)1097-4628
- Tajvidi N. Confidence intervals and accuracy estimation of heavy-tailed generalized Pareto distributions. Extremes. 2003;6:111–123.10.1023/B:EXTR.0000025662.09067.3b
- Sarkar S, Adhikari B. Lignin-modified phenolic resin: synthesis optimization, adhesive strength, and thermal stability. J Adhes Sci Technol. 2000;14:1179–1193.10.1163/156856100743167
- Huda MS, Drzal LT, Mohanty AK, et al. Effect of fiber surface-treatments on the properties of laminated biocomposites from poly (lactic acid) (PLA) and kenaf fibers. Compos Sci Technol. 2008;68:424–432.10.1016/j.compscitech.2007.06.022
- Lee DG, Kim YG, Hwang B, et al. Effects of temperature on dynamic compressive properties of Zr-based amorphous alloy and composite. Mater Sci Eng A. 2008;472:316–323.10.1016/j.msea.2007.04.050
- Cassagnau P, Melis F. Non-linear viscoelastic behavior and modulus recovery in silica filled polymers. Polymer. 2003;44:6607–6615.10.1016/S0032-3861(03)00689-X