References
- Blatz MB, Sadan A, Kern M. Resin-ceramic bonding: a review of the literature. J Prosthet Dent. 2003;89:268–274.
- Jedynakiewicz NM, Martin N. The effect of surface coating, on the bond strength of machinable ceramics. Biomaterials. 2001;22:749–752.10.1016/S0142-9612(00)00294-5
- Borges GA, Sophr AM, de Goes MF, et al. Effect of etchin and airborne particle abrasion on the microstructure of different dental ceramics. J Prosthet Dent. 2003;89:479–488.10.1016/S0022-3913(02)52704-9
- Atsu SS, Kilicarslan MA, Kucukesmen HC, et al. Effect of zirconium-oxide ceramic surface treatments on the bond strength to adhesive resin. J Prosthet Dent. 2006;95:430–436.10.1016/j.prosdent.2006.03.016
- Osorio E, Toledano M, Silveira BL, et al. Effect of different surf treatments on In-Ceram Alumina roughness. An AFM study. J Dent. 2009;38:118–122.
- Sorensen JA, Engelman MJ, Torres TJ, et al. Shear bond strength of composite resin to porcelain. Inter J Prosthodont. 1991;4:17–23.
- Aida M, Hayakawa T, Mizukawa K. Adhesion of composite to porcelain with various surface conditions. J Prosthet Dent. 1995;73:464–470.
- Semmelman JO, Kulp PR. Silane bonding porcelain teeth to acrylic. J Am Dent Assoc. 1968;76:69–73.10.14219/jada.archive.1968.0017
- Jochen DG, Caputo AA. Composite resin repair of porcelain denture teeth. J Prosthet Dent. 1977;38:673–679.
- Ferrando JM, Graser GN, Tallents RH, et al. Tensile strength and microleakage of porcelain repair materials. J Prosthet Dent. 1983;50:44–50.10.1016/0022-3913(83)90164-6
- Bailey LF, Bennett RJ. DICOR surface treatments for enhanced bonding. J Dent Res. 1988;67:925–931.10.1177/00220345880670060701
- Wolf DM, Powers JM, O’Keefe KL. Bond strength of composite to porcelain treated with new porcelain repair agents. Dent Mater. 1992;8:158–161.10.1016/0109-5641(92)90074-M
- Chen JH, Matsumura H, Atsuta M. Effect of different etching periods on the bond strength of a composite resin to a machinable porcelain. J Dent. 1998;26:53–58.10.1016/S0300-5712(96)00078-4
- Chen JH, Matsumura H, Atsuta M. Effect of etchant, etching period, and silane priming on bond strength to porcelain of composite resin. Oper Dent. 1998;23:250–257.
- Lacy AM, LaLuz J, Watanabe LG, et al. Effect of porcelain surface treatment on the bond to composite. J Prosthet Dent. 1988;60:288–291.10.1016/0022-3913(88)90270-3
- Calamia JR. Etched porcelain veneers: the current state of the art. Quintessence Int. 1985;16:5–12.
- Kern M, Thompson VP. Sandblasting and silica coating of a glassinfiltrated alumina ceramic: volume loss, morphology, and changes in the surface composition. J Prosthet Dent. 1994;71:453–461.10.1016/0022-3913(94)90182-1
- Ferrari M, Cagidiaco MC, Borracchini A, et al. Evaluation of a chemical etching solution for nickel–chromium–beryllium and chromium–cobalt alloys. J Prosthet Dent. 1989;62:516–521.10.1016/0022-3913(89)90070-X
- Casucci A, Osorio E, Osorio R, et al. Influence of different surface treatments on surface zirconia frameworks. J Dent. 2009;37:891–897.10.1016/j.jdent.2009.06.013
- Schmage P, Nergiz I, Herrmann W, et al. Influence of various surface-conditioning methods on the bond strength of metal brackets to ceramic surfaces. Am J Orthod Dentofac Orthop. 2003;123:540–546.10.1016/S0889-5406(02)56911-0
- Kramer N, Lohbauer U, Frankenberger R. Adhesive luting of indirect restorations. Am J Dent. 2000;13:60–76.
- El Feninat F, Elouatik S, Ellis TH, et al. Quantitative assessment of surface roughness as measured by AFM: application to polished human dentin. Appl Surf Sci. 2001;183:205–215.10.1016/S0169-4332(01)00558-X
- Stangel I, Nathanson D, Hsu CS. Shear strength of the composite bond to etched porcelain. J Dent Res. 1987;66:1460–1465.10.1177/00220345870660091001
- Kamada K, Yoshida K, Atsuta M. Effect of ceramic treatments on the bond of four resin luting agents to a ceramic material. J Prosthet Dent. 1998;79:508–513.10.1016/S0022-3913(98)70170-2
- Ozcan M, Alkumru HN, Gemalmaz D. The effect of surface treatment on the shear bond strength of luting cement to a glass-infiltrated alümina ceramic. Int J Prosthodont. 2001;14:335–339.
- Kumbuloglu O, Lassila LV, User A, et al. Bonding of resin composite to zirconium by two air particle methods. Oper Dent. 2006;31:248–255.10.2341/05-22
- Zhang Y, Lawn BR, Malament K. Damaging accumulation and fatigue life of particle-abraded ceramics. Int J Prosthodont. 2006;19:442–448.
- Casucci A, Mazzitelli C, Monticelli F, et al. Morphological analysis of three zirconium oxide ceramics: effect of surface treatments. Dent Mater. 2010;26:751–760.10.1016/j.dental.2010.03.020
- Kara HB, Dilber E, Koc O, et al. Effect of different surface treatments on roughness of IPS Empress 2 ceramic. Lasers Med Sci. 2012;27:267–272.10.1007/s10103-010-0860-3
- Akgungor G, Sen D, Aydin M. Influence of different surface treat-ments on the short-term bond strength and durability between a zirconia post and a composite resin core material. J Prosthet Dent. 2008;99:388–399.10.1016/S0022-3913(08)60088-8
- Özcan M, Vallittu PK. Effect of surface conditioning methods on the bond strength of luting cement to ceramics. Dent Mater. 2003;19:725–731.
- Garverick L. Corrosion in the petrochemical industry. 3rd ed. ASM International, OH; 1994. p. 191–196.
- Javid AH, Hassani AH, Golshan G. Selective removal of heavy metals from ferric chloride caused by etching processes by using sulfide precipitation. J Environ Sci Technol. 2004;20:35–45.
- Akyıl MS, Yilmaz A, Karaalioğlu OF, et al. Shear bond strength of repair composite resin to an acid-etched and a laser-irradiated feldspathic ceramic surface. Photomed Laser Surg. 2010;28:539–545.10.1089/pho.2009.2586
- Sano H, Shono T, Sonoda H, et al. Relationship between surface area for adhesion and tensile bond strength – Evaluation of a micro-tensile bond test. Dent Mater. 1994;10:236–240.10.1016/0109-5641(94)90067-1
- Pashley DH, Sano H, Ciucchi B, et al. Adhesion testing of dentin bonding agents: a review. Dent Mater. 1995;11:117–125.10.1016/0109-5641(95)80046-8
- Blatz MB, Sadan A, Martin J. In vitro evaluation of shear bond strengths of resin to densely sintered hıgh purity zirconium oxide ceramic after long-term storage and thermal cycling. J Prosthet Dent. 2004;91:356–362.10.1016/j.prosdent.2004.02.001
- Della Bona A, Anusavice KJ, Mecholsky JJ Jr. Failure analysis of resin composite bonded to ceramic. Dent Mater. 2003;19:693–699.10.1016/S0109-5641(03)00015-0