Surface treatment of stainless steel by electrolytic oxidation and deposition of titanium complexing ion solution to improve metal-ceramic adhesion

References

• Morimune T, Hirayama N. Study of catalytic reduction of NOx in flue gas from a municipal refuse incinerator (experimental results of NOx removal test plant) JSME Int. J Ser B. 1988;31:135–139.
   Web of Science ®Google Scholar
• Wu Z, Jiang B, Liu T, et al. Experimental study on a low-temperature SCR catalyst based on MnOx/TiO2 prepared by sol-gel method. J Hazard Mater. 2007;145:488–494.10.1016/j.jhazmat.2006.11.045
   PubMed Web of Science ®Google Scholar
• Novaković T, Radić N, Grbić B, et al. The thermal stability of porous alumina/stainless steel catalyst support obtained by spray pyrolysis. Appl Surf Sci. 2008;255:3049–3055.10.1016/j.apsusc.2008.08.074
   Web of Science ®Google Scholar
• Xing X, Wang H. Influence of rare earths on electrochemical corrosion and wear resistance of RE-Cr/Ti pack coatings on cemented 304 stainless steel. Surf Coat Technol. 2016;291:151–160.10.1016/j.surfcoat.2016.02.001
   Web of Science ®Google Scholar
• Cheng Lin C, Chang HC, Chou LT. Electropolishing of 304 stainless steel: interactive effects of glycerol content, bath temperature, and current density on surface roughness and morphology. Surf Coat Technol. 2009;204:448–454.
   Web of Science ®Google Scholar
• Cheng Lin C, Chang HuC. Electropolishing of 304 stainless steel: surface roughness control using experimental design strategies and a summarized electropolishing model. Electrochim Acta. 2008;53:3356–3363.
   Web of Science ®Google Scholar
• Stefanov P, Stoychev D, Stoycheva M, et al. XPS, SEM and TEM characterization of stainless-steel 316L surfaces after electrochemical etching and oxidizing. Surf Interface Anal. 1999;28:106–110.10.1002/(ISSN)1096-9918
   Web of Science ®Google Scholar
• Lee SJ, Lai JJ. The effects of electropolishing (EP) process parameters on corrosion resistance of 316L stainless steel. J Mater Process Technol. 2003;140:206–210.10.1016/S0924-0136(03)00785-4
   Web of Science ®Google Scholar
• Naiming L, Qiang L, Junwen G, et al. Surface texturing-plasma nitriding duplex treatment for improving tribological performance of AISI 316 stainless steel. Materials. 2016;9:875.
   Web of Science ®Google Scholar
• Nagel, R, Balogh, AG. Atomic transport in metal/ceramic interfaces under heavy ion. Solid State Ionics, 1999;156:135–142.10.1016/S0168-583X(99)00266-9
   Web of Science ®Google Scholar
• Suvorova EI, Cantoni M, Buffat PA, et al. Structure analysis of the YBCO layer in Ag/YBCO/metal oxide buffer/Hastelloy composite tape before and after 107 MeV Kr17+ irradiation. Acta Mater. 2014;75:71–79.10.1016/j.actamat.2014.04.042
   Web of Science ®Google Scholar
• A Chiba, SShibukawa, IMuto, et al. Microelectrochemical aspects of interstitial carbon in type 304 stainless steel: improving pitting resistance at MnS inclusion. J Electrochem Soc. 2015;162:C270–C278.10.1149/2.0851506jes
   Web of Science ®Google Scholar
• Park SC, Yoon SS, Nam JD. Surface characteristics and adhesive strengths of metal on O2 ion beam treated polyimide substrate. Thin Solid Films. 2008;516:3028–3035.10.1016/j.tsf.2007.11.113
   Web of Science ®Google Scholar
• Burstein GT, Pistorius PC, Mattin SP. The nucleation and growth of corrosion pits on stainless steel. Corros Sci. 1993;35:57–62.10.1016/0010-938X(93)90133-2
   Web of Science ®Google Scholar
• Albrimi YA, Addi AA, Douch J, et al. Inhibition of the pitting corrosion of 304 stainless steel in 0.5 M hydrochloric acid solution by heptamolybdate ions. Corros Sci. 2015;90:522–528.10.1016/j.corsci.2014.10.023
   Web of Science ®Google Scholar
• Kobayashi M, Tomita K, Petrykin V, et al. Direct synthesis of brookite-type titanium oxide by hydrothermal method using water-soluble titanium complexes. J Mater Sci. 2008;43:2158–2162.10.1007/s10853-007-1912-3
   Web of Science ®Google Scholar
• Lee C, Kim J. Surface modification method of stainless steel using electrochemical etching. J Korean Soc Precis Eng. 2014;31:353–358.10.7736/KSPE.2014.31.4.353
   Google Scholar
• He J, Shi H, Shu X, et al. On the nature of Ti(IV)-pillared layered metal hydroxides prepared from green, water-soluble Ti-peroxide. AIChE J. 2010;56:1352–1362.
   Web of Science ®Google Scholar
• Yoshimura M, Shiro M, Kakihana M, et al. A water-soluble titanium complex for the selective synthesis of nanocrystalline brookite, rutile, and anatase by a hydrothermal method. Angew Chem Int Ed. 2006;45:2378–2381.
   PubMed Web of Science ®Google Scholar
• Tada M, Tomita K, Petrykin V, et al. Preparation and characterization of citratoperoxotitanate barium compound for BaTiO3 synthesis. Solid State Ionics. 2002;151:293–297.10.1016/S0167-2738(02)00726-9
   Web of Science ®Google Scholar
• Dakanali M, Kefalas ET, Raptopoulou CP, et al. A new dinuclear Ti(IV)-peroxo-citrate complex from aqueous solutions. Synth Struct Inorg Chem. 2003;42:4632–4639.10.1021/ic0343051
   PubMed Web of Science ®Google Scholar